On quasi-degeneracies in plate vibration problems

In plotting the variation of frequencies with geometric parameters such as side ratio, skew angle, thickness taper, etc. in detailed studies of the vibration characteristics of plates, situations are encountered such as crossing of the frequency curves or the tendency of these curves to come close together and veer away from each other. These have been generally referred to as “frequency crossings” and “transitions” respectively. The latter may preferably be referred to as “quasi-degeneracies”. In the literature there appears to be some ambiguity in the analysis and interpretation of these features. In this paper, a clarification of some of these questions as regards rectangular and skew plates is presented by making use of concepts from physics dealing with molecular vibrations.     

Natural rubber (Hevea Brasiliensis)-based quasi-solid electrolyte as a potential candidate for arresting recombination and improving performance in aqueous dye-sensitized solar cells

Journal of Materials Science: Materials in Electronics - We successfully fabricated dye sensitized solar cells (DSSCs) employing a quasi-solid state electrolyte based on pristine insulator natural...     

Enzymatic synthesis of sugar esters and their potential as surface-active stabilizers of coconut milk emulsions

Sugar esters are compounds with surfactant properties (biosurfactants), i.e., capable of reducing the surface tension and promote the emulsification of immiscible liquids. On the other hand, as with all emulsions, coconut milk is not physically stable and is prone to phase separation. Therefore, the aim of this work was to evaluate the synthesis of fructose, sucrose and lactose esters from the corresponding sugars using Candida antarctica type B lipase immobilized in two different supports, namely acrylic resin and chitosan, and evaluate its application in the stabilization of coconut milk emulsions. The enzyme immobilized on chitosan showed the highest yield of lactose ester production (84.1%). Additionally, the production of fructose ester was found to be higher for the enzyme immobilized on the acrylic resin support (74.3%) as compared with the one immobilized on chitosan (70.1%). The same trend was observed for the sucrose ester, although with lower percentage yields. Sugar esters were then added to samples of fresh coconut milk and characterized according to their surface tension, emulsification index and particle size distribution. Although the microscopic analysis showed similar results for all sugar esters, results indicated lactose ester as the best biosurfactant, with a surface tension of 38.0 N/m and an emulsification index of 54.1%, when used in a ratio of 1:10 (biosurfactant:coconut milk, v/v) for 48 h experiments.     

Enrichment of ω‐3 fatty acids in flax seed oil by alkaline lipase of Aspergillus fumigatus MTCC 9657

Flax seed oil obtained from the seeds of flax plant (Linum usitatissimum, L.) is an unexploited source which contains ω‐3 and ω‐6 fatty acids. Flax seed oil is hydrolysed with a novel alkaline lipase from Aspergillus fumigatus MTCC 9657 for the removal of unwanted fatty acids and enrichment of ω‐3 fatty acids. An appropriate balance of ω‐3 and ω‐6 polyunsaturated fatty acids and enzymatic enrichment of polyunsaturated fatty acids in diet promote nutrition and health. Fatty acid composition shows that flax seed oil contains about 26.80%, 13.5% and 25.45% of ω‐3 and ω‐6 fatty acids in triglyceride (TG), diglyceride (DG) and monoglyceride (MG), respectively. After 8 h of hydrolysis, ω‐3 content was increased to 39% in TG, showing that unwanted saturated fatty acids are removed. ω‐6 content of triglycerides in flax seed oil also showed 54.76% increase after 8 h of hydrolysis. An enzymatic method of hydrolysis by fungal lipase was developed by this study and achieved to concentrate the essential fatty acids linoleic acid (LA) and α‐linoleic acids (ALA).     

Nutritional and nutraceutical comparison of Jamaican Psidium cattleianum (strawberry guava) and Psidium guajava (common guava) fruits

Psidium cattleianum (strawberry guava) is one of many underutilised edible fruits that grow wild in Jamaica, and could potentially be commercially exploited to yield health and economic benefits. In this study, the total phenolics, proximate contents, and antioxidant, anti-inflammatory, and antimicrobial activities of P. cattleianum and P. guajava (common guava), a well-known species, were compared. Strawberry guavas were found to be superior to common guavas in antioxidant and antimicrobial activities, total phenolics and vitamin C content. They also possessed relatively high fibre content (24.9%). The hexane and ethyl acetate extracts of strawberry guavas showed cyclooxygenase-2 enzyme inhibitory activities of 18.3% and 26.5%, respectively (250 μg/mL), indicating anti-inflammatory activity. The EtOAc and MeOH extracts of P. guajava showed 56.4% (COX-2) and 44.1% (COX-1) inhibitory activity, respectively. Additionally, nine compounds were isolated from strawberry guava fruits, some of which demonstrated anti-inflammatory activity. These results indicate that strawberry guavas are beneficial for health.     

Numerical and experimental evaluation of performance of centrifugal seals

‘Centrifugal seals’ or ‘Slinger seals’ offer an attractive choice as non-contact-type sealing in fluid machinery. These seals utilize the radial pressure gradient caused by centrifugal forces in a rotating fluid ring, to create a sealing of the working fluid. Basic construction of a typical seal consists of a rotating disc inside a stationary casing; one side of the disc (sealing side) is provided with a set of slots (Type-1) or vanes (Type-2) to enhance the tangential velocity of the fluid. The other side of the disk (back side) in both the configurations is exposed to high pressure liquid being sealed. Both numerical and experimental investigations of the performance of Type-1 seal (with slots) have been carried out so as to optimize the seal configuration to achieve maximum sealing capacity, with minimum power consumption. A comparison of the performance of Type-1 seal has been made with that of conventional one (Type-2) in view of economy of construction and better sealing with minimal expense of power consumption. A test rig that allows for varying the major geometrical and operating parameters was designed and tests were conducted with water as the medium. Influence of major geometric parameters like dimensions and number of slots, axial/radial clearances and major operating parameters like rotational speed, inlet pressure and sealing fluid bypass flow rate has been investigated. Apart from various pressure, temperature, flow and torque measurements, the interface between the sealing and working fluid for the experiments was captured and recorded using a high speed camera at ~26,000 frames per second. Geometrical configuration for the slots that maximizes the sealing capacity is arrived through 3D numerical simulations using commercial CFD solver ANSYS Fluent^®. A good agreement is obtained with respect to experimental results. In view of economy of construction and better sealing with minimal expense of operating power, a modified version of Type-1 seal termed as Type-3 seal is investigated. A simple 1D model for prediction of the interface radius during the seal operation, which could be used as a quick design guide, is also presented.     

Methanol Conversion to Hydrocarbons (MTH) Over H-ITQ-13 (ITH) Zeolite

Product flexibility is key to meeting fluctuating chemicals demands in the future. In this contribution, the methanol to hydrocarbons (MTH) reaction was investigated over two Ge-containing H-ITQ-13 samples, one with needle-like (H-ITQ-13(N), with (Si+Ge)/Al) = 42) and another with plate-like (H-ITQ-13(P), with (Si+Ge)/Al > 100) morphology. The samples were characterised using XRD, BET, SEM/EDS and FTIR spectroscopy, and their MTH performance was compared with the performance of H-ZSM-5 and H-ZSM-22. Similar specific surface areas (413 and 455 m² g^?1 for H-ITQ-13(N) and (P), respectively) and similar acid strength (Δν ~ ?327(?310) cm^?1) was observed for the two H-ITQ-13 samples. Testing of H-ITQ-13(N) at weight hourly space velocity (WHSV) = 2–8 h^?1 at 350–450 °C revealed that C₅₊ alkenes were the main products (35–45 % selectivity at 400 °C), followed by propene and butene. A low but significant selectivity for aromatic products was observed (6–8 % selectivity at 400 °C). Product selectivity was found to be independent of deactivation. The methanol conversion capacity of H-ITQ-13(N) was 120–150 g methanol g^?1 catalyst at 400 °C. Testing H-ITQ-13 at high (30 atm) and ambient pressure, respectively, at 350 °C showed that a high pressure led to enhanced C₅₊ selectivity, but close to a tenfold decrease in methanol conversion capacity. H-ITQ-13(P) was tested at 400 °C and 2 h^?1. It gave lower conversion than H-ITQ-13(N). Furthermore, when compared at the same conversion level, H-ITQ-13(P) gave higher C₅₊ alkene selectivity, lower aromatics selectivity, and a higher propene to ethene ratio than H-ITQ-13(N). The H-ITQ-13 samples yielded a product spectrum intermediate of H-ZSM-22 and H-ZSM-5. The effluent product cut-off of H-ITQ-13 was similar to that of H-ZSM-5 with tetramethylbenzene as the largest significant product, while H-ZSM-22 produced mainly linear and branched alkenes. The lifetime of H-ITQ-13(N) was clearly enhanced compared to H-ZSM-22, but inferior to H-ZSM-5.     

Transported snapshot model order reduction approach for parametric,steady-state fluid flows containing parameter-dependent shocks

A new model order reduction approach is proposed for parametric steady-state nonlinear fluid flows characterized by shocks and discontinuities whose spatial locations and orientations are strongly parameter dependent. In this method, solutions in the predictive regime are approximated using a linear superposition of parameter-dependent basis. The sought-after parametric reduced bases are obtained by transporting the snapshots in a spatially and parametrically dependent transport field. Key to the proposed approach is the observation that the transport fields are typically smooth and continuous, despite the solution themselves not being so. As a result, the transport fields can be accurately expressed using a low-order polynomial expansion. Similar to traditional projection-based model order reduction approaches, the proposed method is formulated mathematically as a residual minimization problem for the generalized coordinates. The proposed approach is also integrated with well-known hyper-reduction strategies to obtain significant computational speedups. The method is successfully applied to the reduction of a parametric one-dimensional flow in a converging-diverging nozzle, a parametric two-dimensional supersonic flow over a forward-facing step, and a parametric two-dimensional jet diffusion flame in a combustor.     

Rolling element bearing design through genetic algorithms

The design of rolling element bearings has been a challenging task in the field of mechanical engineering. While most of the real aspects of the design are never disclosed by bearing manufacturers, the common engineer is left with no other alternative than to refer to standard tables and charts containing the bearing performance characteristics. This paper presents a more viable method to solve this problem using genetic algorithms (GAs). Since the algorithm is basically a guided random search, it weakens the chances of getting trapped in local maxima or minima. The method used has yielded improved performance parameters than those catalogued in standard tables.     

Ternary Solvent System to Control the Morphology of Active Blend in Inverted Organic Solar Cells

Bulk heterojunction blend of poly(3-hexylthiophene)–[6,6]-phenyl-C₆₁-butyric acid methyl ester prepared using the ternary solvent mixture was used as the active layer of an inverted organic solar cell. The ternary solvent mixture consisted of a good solvent such as ortho-dichlorobenzene and two marginal solvents such as cyclohexanone and toluene offering limited solubility to the poly(3-hexylthiophene) component. Power conversion efficiency of inverted device was found to decrease from 2.74?±?0.05% in the unmodified device to 2.64?±?0.07% in the modified device. UV–visible measurement revealed less efficient photoabsorption in the mixed cosolvent-casted active layer due to insufficient and disordered crystallization of poly(3-hexylthiophene) domains.