Fabrication of antiferroelectric PLZT films on metal foils

Fabrication of high-dielectric-strength antiferroelectric (AFE) films on metallic foils is technically important for advanced power electronics. To that end, we have deposited crack-free Pb_0.92La_0.08Zr_0.95Ti_0.05O₃ (PLZT 8/95/5) films on nickel foils by chemical solution deposition. To eliminate the parasitic effect caused by the formation of a low-permittivity interfacial oxide, a conductive buffer layer of lanthanum nickel oxide (LNO) was coated by chemical solution deposition on the nickel foil before the deposition of PLZT. Use of the LNO buffer allowed high-quality film-on-foil capacitors to be processed in air. With the PLZT 8/95/5 deposited on LNO-buffered Ni foils, we observed field- and thermal-induced phase transformations of AFE to ferroelectric (FE). The AFE-to-FE phase transition field, E_AF = 225 kV/cm, and the reverse phase transition field, E_FA = 190 kV/cm, were measured at room temperature on a ≈1.15 μm-thick PLZT 8/95/5 film grown on LNO-buffered Ni foils. The relative permittivities of the AFE and FE states were ≈600 and ≈730, respectively, with dielectric loss ≈0.04 at room temperature. The Curie temperature was ≈210 °C. The thermal-induced transition of AFE-to-FE phase occurred at ≈175 °C. Breakdown field strength of 1.2 MV/cm was measured at room temperature.     

Spectral characteristics of a binary dye-mixture laser

We have investigated laser action in a binary mixture of dyes, Rh-6G and DCM, resulting in tunable laser emission over an extended frequency region. The two dyes absorb the same pump radiation but fluoresce over frequency ranges that are shifted with respect to each other, thereby resulting in extended tunability. Following a time-dependent analysis of a rate-equation model that describe the operation of such a laser, theoretical estimates for optimum dye concentrations and the corresponding extension of the laser tuning range have been obtained.     

Multielement analysis in cereals and pulses by k0 instrumental neutron activation analysis

The concentrations of some elements in a few varieties of cereals and pulses are determined by Instrumental Neutron Activation Analysis using a single comparator method (k0-standardised NAA method). A total of 15 elements are measured. The method was validated by analysing the Standard Reference Material (SRM-1571) of NIST; the results are within +/-10% of the reported values for the majority of the elements. The measured concentrations of major and minor elements are analysed in terms of the average intake of mineral content and the role of these elements in terms of the nutritional value.     

Induction of human breast cancer cell apoptosis from G2/M preceded by stimulation into the cell cycle by Z-1,1-dichloro-2,3-diphenylcyclopropane

We have shown previously that Z-1,1-dichloro-2,3-diphenylcyclopropane (a.k.a. Analog II, A(II)) inhibits human breast cancer cell proliferation regardless of estrogen receptor status or estrogen sensitivity, and that its cellular targets include microtubules. In the present study, we investigated the apoptosis-inducing effects of A(II). MCF-7, MCF-7/LY2, and MDA-MB-231 cells all showed nuclear fragmentation in response to 100 microM A(II) when stained with Hoechst 33342 and examined by fluorescence microscopy. Pulsed field gel electrophoretic analysis showed that each of the cell lines also developed specific high molecular weight DNA fragments: a low level of 1-2 Mb fragments appeared after 6 hr, while 30-50 kb fragments accumulated subsequently. At 24 hr of drug exposure, the majority of cells became nonadherent, and the 30-50 kb fragments were restricted to detached MCF-7 and MDA-MB-231 cells. Both adherent and detached MCF-7/LY2 cells exhibited these fragments. A previous study by single-color (propidium) flow cytometry demonstrated that A(II) blocks MDA-MB-231 cells in G2/M of the cell cycle. More refined analyses in the present study showed this same result for MDA-MB-231 cells, but MCF-7 and MCF-7/LY2 cells did not reveal apparent drug-induced cell cycle block. A(II) demonstrated growth inhibitory, cell cycle-perturbing, and hypodiploidy-inducing activity against other human breast carcinoma lines, i.e. BT-20, CAMA-1, and SKBR-3, but no such actions in the non-tumorigenic, "normal" human breast epithelial line MCF-10A. Bromodeoxyuridine labeling and two-color flow cytometric analysis, however, suggested that A(II) caused stimulation into S phase, and that G2/M was the phase of the cell cycle from which cells apoptosed. A(II) caused cell rounding, detachment from the growth matrix, and nuclear shrinkage and fragmentation in parallel with biochemical changes. Cycloheximide inhibited A(II)-induced cell death, indicating that its toxicity requires de novo protein synthesis.     

Experimental Electrohydrodynamic Nanospray Production Using Drawn Glass Capillaries

This article describes a simple and low-cost method of fabricating glass capillary nanospray emitter sources, and, if required, inserting a charging electrode. Initial experimental work employing such a source is described, whose results suggest that whilst the positioning of the charging electrode relative to the orifice influences the charging current and spray considerably, this position may not correspond with that previously reported as being ideal for electrospray systems one or two orders of magnitude greater.     

Defective repair of oxidative damage in mitochondrial DNA in Down''s syndrome

BACKGROUND: Synthetic homopyrimidine peptide nucleic acids (PNAs) can bind complementary targets in double-stranded DNA, generating strand-displacement complexes, and so offering an opportunity to modulate specific gene expression. Several issues remain to be addressed before these attributes can be exploited in vivo, however. RESULTS: The kinetics of the interaction between a homopyrimidine PNA and a complementary homopurine target on double-stranded DNA were analyzed in the presence or absence of a preformed strand-displacement complex proximal to the target. The complex was established under low salt conditions by the binding of a different homopyrimidine PNA to a target situated adjacent to the first PNA target. These two targets were placed next to each other on opposite strands at distances of 0, 2, 4 and 8 base pairs apart. The presence of a preformed strand-displacement complex near the target accelerates the binding of PNA to double-stranded DNA in a salt-dependent manner. The influence of salt on the binding rates was also examined. The binding rate is increased by a factor of 1 x exp(70[NaCl]), that is, 16-fold at 40 mM NaCl and more than 10(4)-fold if extrapolated to 140 mM NaCl. This effect is significantly reduced if the two targets are 2 base pairs apart and completely absent if the distance is 4 base pairs or more. CONCLUSIONS: The perturbation of the DNA helix imposed by a PNA strand-displacement complex only propagates a few base pairs. It is therefore possible to target sites in the immediate vicinity of strand invasion complexes specifically. The results presented have implications for the mechanism of strand displacement and for the application of PNA in a genomic context.     

Fabrication and Electromechanical Characterization of Silver-Clad BSCCO Tapes

The powder-in-tube technique consisting of industrial processes such as wire drawing and rolling has been widely used to fabricate superconducting tapes. In the present investigation a novel technique was adopted to fabricate BSCCO 2223 tapes. Instead of wire drawing, the silver billet was reduced in size by groove rolling. Stress conditions during groove rolling were analyzed and appropriate changes were incorporated to optimize the deformation process. Subsequent thermomechanical treatment resulted in tapes with average critical current densities of 18,000 A/cm². Phase development and microstructural evolution during the thermomechanical treatment were studied using XRD, SEM, and TEM. The electromechanical properties of monofilament and composite BSCCO tapes were evaluated by subjecting them to in situ tensile tests. The strain tolerance of the composite was found to be better than that of the monofilament BSCCO tape.     

Flow properties of thermally depolymerized liquid natural rubber

The flow behavior of liquid natural rubber (LNR) with reference to the effect of molecular weight, shear rate, and temperature has been studied. LNR samples were prepared by thermal depolymerization of rubber (NR) through the combined effect of mechanical, chemical, and thermal energies. High molecular weight samples, especially at lower temperatures, showed pseudoplastic behavior, whereas the low molecular weight samples were Newtonian at all temperatures. The viscosity of LNR considerably decreases with increase in temperature. The activation energy of flow was also calculated. © 1995 John Wiley & Sons, Inc.     

Ba2HoNbO6: A new perovskite ceramic substrate for superconducting YBa2Cu3O7−δ thick film (T c (0) = 92 K)

A complex perovskite oxide Ba₂HoNbO₆ has been developed as a non-reacting substrate for YBa₂Cu₃O_7– superconducting film with lattice constant a = 8.3905 Å. The dielectric constant (30) and loss factor value (5 × 10^–3) of the material are in the range suitable for its use as substrate for microwave applications. A YBa₂Cu₃O_7–delta; superconducting thick film dip coated on Ba₂HoNbO₆ substrate gave a T _c(0) of 92 K and current density of 1.2 × 10⁴ A cm^–2.     

Validation of biokinetic models of Cs and I using their daily dietary intakes and organ contents in an adult Indian population

The daily dietary intakes and total contents of Cs and I in skeletal muscle and thyroid, respectively, for an average Indian adult were estimated by determining their concentrations in the total cooked diet and tissue samples using instrumental neutron activation analysis. These data were then used to predict the biological half-lives of Cs and I and their radioactive counterparts for the Reference Indian Man. The predicted biological half-lives of Cs and I for Reference Indian Man were found to be comparable with the reported values for the ICRP Reference Man.