Effect of novel (Gd,Cu) substitution on the electrical properties and magnetoelectric coupling of bismuth ferrite ceramics

The influence of Gd dopant and (Gd, Cu) dopants on the ferroelectric, dielectric and magnetoelectric properties of single phase BiFeO₃ (BFO) were investigated. Nanoparticles of undoped BiFeO₃, Bi_0.95Gd_0.05FeO₃ and Bi_1?xGd_xFe_0.98Cu_0.02O₃ (x?=?1, 2, 3, 4 and 5%) were prepared by sol–gel method. X-ray diffraction reveals that all the samples crystallize in rhombohedral phase. The simultaneous Gd and Cu doping at BFO lattice has significantly enhanced the ferroelectric properties of BFO compared to that of BFO. Substitution of Gd alone at the Bi site, gave rise to attractively enhanced remnant polarization. Though the (Gd, Cu) doped BFO samples exhibit relatively less enhancement, their values of remnant polarization are appreciable. Doping of (Gd, Cu) in the BFO lattice leads to an appreciable dielectric properties. An effective magnetoelectric coupling has been recorded for doped BFO when compared to BFO.     

Benchmarking grey particle approximations against nongrey particle radiation in circulating fluidized bed combustors

Investigation of the effect of grey/nongrey particle property models on radiative heat fluxes and source terms is performed in the dilute zone of the lignite-fired 150?kW Middle East Technical University circulating fluidized bed combustor test rig. Predictive accuracy and computational economy of several grey particle models, geometric optics approximation (GOA) with average particle reflectivity (GOA2), GOA with Fresnel solution for particle reflectivity (GOA3), and Planck mean particle properties from spectral Mie solution are tested by benchmarking their predictions against spectrally banded solution of radiative transfer equation (RTE). Comparisons reveal that all grey models lead to accurate and CPU efficient radiative heat flux predictions. On the other hand, only GOA3 and Planck mean properties are in favorable agreement with the benchmark solution for both incident fluxes and source terms. These findings indicate that grey particle approximation with GOA3 is a more practical choice in solution of RTE as it eliminates the need for spectral calculations.     

Electrodeposition of platinum on polytyramine-modified electrodes for electrocatalytic applications

Cyclic voltammetry was used in order to deposit conducting polytyramine (PTy) on graphite substrates. In acidic media, ca. 40 deposition cycles resulted in the formation of stable polymer films with reasonably good resistivity. Electrochemical deposition of platinum on the PTy-covered graphite substrate allowed us to obtain a composite material that exhibits, for a platinum loading of 0.34 mg cm⁻², a specific electrochemically active surface area of the Pt particles of ca. 57 m² g⁻¹. Good electrocatalytic activity of this electrode material for phenol oxidation in acidic media was found, and the results suggested that, when deposited as small particles in a PTy matrix, platinum is less sensitive to deactivation by phenol oxidation polymeric products.     

Color‐emotion associations and color preferences: A case study for residences

This study examines existing beliefs about “color” focusing on color‐emotion associations by discussing how color can be used as a way of communicator to fulfill human needs in residences. Fifty people from various age groups participated in the study. They were asked to match a list of adjectives with the proper color samples from the catalogue of a quite popular color producer firm in Turkey. Results indicate that there is a strong dependency between the choice and use of green at residences. Emotional responses to colors change with value and saturation levels. According to the test results, gender and age are determining factors in the selection of achromatic black. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 144 – 150, 2007     

Application of Mid-infrared Spectroscopy for the Measurement of Several Quality Parameters of Alcoholic Beverages, Wine and Raki

Mid-infrared (IR) spectroscopy, which is a rapid and relatively small amount of waste producing technique, was used to predict several quality parameters of two types of alcoholic beverages, wine and raki. Mid-infrared spectra of red, rose and white wines and a traditional aniseed alcoholic beverage, raki were collected and relations were established between measured chemical parameters (pH, brix, total phenol content, anthocyanin content, titratable acidity, sugar content, electrical conductivity and some colour parameters) of these beverages and their infrared spectra using chemometric techniques. Partial least square regression provided excellent prediction of total phenol (R ²?=?0.97) and anthocyanin contents (R ²?=?0.98) of wine samples and a good prediction of pH (R ²?=?0.9), brix (R ²?=?0.92) and colour intensity (R ²?=?0.93) values were obtained. Brix, total phenol and sugar content of raki samples were also estimated very successfully (R ²?=?0.99) for raki and good prediction was obtained with pH value. Mid-IR spectroscopy in combination with chemometrics could be a promising technique for determination of several quality parameters of alcoholic beverages simultaneously and rapidly.     

Robust guaranteed cost state estimation for discrete‐time systems with random delays and random uncertainties

This paper investigates the guaranteed cost state estimation problem for a class of discrete‐time systems based on the Wirtinger‐based inequality with randomly occurring delays (RODs) and randomly occurring uncertainties (ROUs). The time‐varying delays and parameter uncertainties are considered to occur in random way. Certain mutually uncorrelated Bernoulli‐distributed white‐noise sequences are included to govern the random occurrences. The cost function is chosen appropriately to guarantee an adequate level of performance. New sufficient conditions are established in terms of linear matrix inequalities to ensure the estimation of state vectors for the given discrete‐time system by constructing Lyapunov‐Krasovskii functionals and using reciprocally convex lemma. The advantage of using the proposed results is illustrated via numerical examples.     

Over-expression of the X-linked inhibitor of apoptosis protein (XIAP) delays serum deprivation-induced apoptosis in CHO-K1 cells

Serum deprivation inhibits cell growth and initiates apoptosis cell death in mammalian cell cultures. Since apoptosis is a genetically controlled cell death pathway, over-expression of anti-apoptotic proteins may provide a way to delay apoptosis. This study investigated the ability of the X-linked inhibitor of apoptosis protein (XIAP) to inhibit apoptosis induced by serum deprivation. Study includes evaluation of the ability of XIAP to prolong culture period and its effect on cell proliferation in serum-deprived media. The full length human XIAP was introduced into CHO-K1 cell lines and the effects of XIAP over-expression on the inhibition of apoptosis induced by serum-deprived conditions were examined. In batch cultures, cells over-expressing XIAP showed decreased levels of apoptosis and a higher number of viable cell under serum-deprived conditions compared to the control cell lines. The viability of control cells dropped to 40% after 2 days of serum deprivation, the XIAP expressing cells still maintained at a viability higher than 90%. Further investigation revealed that the caspase-3 activity of the CHO-K1 cell line was inhibited as a result of XIAP expression.     

Ultrasonication‐assisted synthesis of molecularly imprinted polymer‐encapsulated magnetic nanoparticles for rapid and selective removal of 17β‐estradiol from aqueous environment

Molecularly imprinting technique was combined with magnetic nanoparticles to synthesize molecularly imprinted polymer‐encapsulated particles for selective removal and efficient separation of estrogenic compounds from water. The core‐shell‐structured particles were successfully prepared by a novel 2‐h ultrasonication‐assisted synthesis in a mixture of water and organic solvent using dual‐layer surfactant‐modified magnetic particles as core, the most physiologically active estrogenic compound (17β‐estradiol) as template, and widely adapted methacrylic acid as functional monomer. Ultraviolet–visible spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and magnetic separation were used to characterize the particles. High‐performance liquid chromatography–tandem mass spectrometry was used for quantitative binding performance analysis at low‐nanogram per milliliter levels. The particles exhibited satisfactory recognition of 17β‐estradiol in water. They possessed great potential for rapid, cost‐effective, and efficient separation of estrogenic compounds from aqueous environment with specificity. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers