Optimization of osmotic dehydration of yacon slices

Osmotic dehydration assisted by ultrasound (ODAU) at low temperatures reduces water activity (a_w) and maintains nutrients. The influence of solution concentration (SC; 20 to 60° Brix, xylitol and sorbitol) and ultrasound application time (t_us, 0 to 40 min) in ODAU of yacon was studied with the aid of a response surface method. The optimum condition with respect to mass transfer parameters, a_w, and fructan retention was SC of 60° Brix for both solutions and t_us of 2.67 min for xylitol samples and 0 min for sorbitol samples. The application of ultrasound improved dehydration but resulted in depolymerization of fructans.     

Physicochemical Properties,Lipid Oxidation,and Fatty Acid Composition of Sausage Prepared with Meat of Young Nellore Bulls Fed a Diet with Lauric Acid

This study evaluates the quality of sausage obtained from the meat of Nellore cattle fed diets containing different levels (0, 5, 10, and 15 g per kg total DM) of lauric acid (C12:0) from palm kernel cake. A linear reduction (p ≤ 0.05) in lipid oxidation, as reflected by linear decreases in the lightness (L*), yellowness (b*), and saturation (C*) color parameters, is observed on days 7, 14, and 21 of maturation of sausage, and these decreases are accompanied by linear increases in the redness (a*) color and the linoleic (C18:2n–6) and linolenic (C18:3n–3) fatty acid contents. The inclusion of lauric acid in the diet induces linear reductions in the shear force and cooking loss and does not significantly affect various indices, including the centesimal composition, water activity, water holding capacity, composition of most fatty acids (FA), hypocholesterolemic‐to‐hypercholesterolemic FA ratio, atherogenicity, thrombogenicity, and desirable fatty acids. The use of dietary lauric acid from palm kernel cake is recommended at doses up to 15 g per kg because its presence reduces lipid oxidation and improves color parameters, softness, and linoleic and linolenic FA without affecting the FA composition of sausage from Nellore bull's meat. Practical applications : Sausages are products manufactured from chopped or ground meats packaged into animal casings. This product appeared in Brazil through the adaptation of traditional recipes brought by German and Italian immigrant families to weather conditions and the national palate. However, due to its production characteristics, sausage can become a product with lipid characteristics that are undesirable for human consumption. The inclusion of lauric acid (C12:0) in the animal diet might change the biohydrogenation process in the rumen, improve the quality of the deposited FA and reduce lipid oxidation in sausage manufactured from meat. The FA composition and physicochemical properties of sausage predict its acceptance by the consumer market. An optimal advantage would be achieved if these products can be used as not only preservatives but also functional ingredients with antioxidant properties and products for the treatment of metabolic syndrome and cardiovascular diseases through atherogenic action.     

Development of probiotic fruit juice powders by spray-drying: A review

The use of spray-drying for the production of powdered fruit juices has been a common practice in recent years since it is a simple, economic, and advantageous technique. The current knowledge on the different spray-drying parameters, allowing the best conditions to obtain high-quality powders, is presented in this review. The incorporation of probiotic cultures into fruit juices can enhance the functional characteristics of fruit juices. The selection of these probiotics and their benefits to consumers’ health are briefly discussed. As maintaining the viability of probiotics is extremely important in the development of a probiotic functional product, the factors that influence and improve survival, in all pre- and post-spray-drying steps, are also detailed. Finally, a few studies on probiotic fruit juices obtained by spray-drying are cited. Industries should bet on their development and commercialization, since despite being challenging to develop, these are very innovative and attractive products meeting modern consumer demands.     

A comparative study of the purification of betanin

Betanin is a natural pigment with antioxidant properties used as a food colourant. This work describes the spectrophotometric and chromatographic quantification of betanin (2S/15S) and its epimer isobetanin (2S/15R) in fresh beetroot juice, food-grade beetroot powder and betanin standard diluted in dextrin. Absorption spectra of all three samples were deconvoluted using a mixed three-function model. Food-grade beetroot powder has the largest amount of violet-red impurities, probably formed during processing. The purification of betanin from these complex matrices was carried out by seven different methods. Ion exchange chromatography was the most efficient method for the purification of betanin from all samples; however, fractions contain high amounts of salt. Reversed-phase HPLC as well as reversed-phase column chromatography also produced good results at a much faster rate. The longer retention time of isobetanin when compared to betanin in reversed-phase conditions has been investigated by means of quantum-mechanical methods.     

Sizing of a solar/hydrogen system for high altitude long endurance aircrafts

High altitude long endurance (HALE) aircrafts are aerial platforms operating in the stratosphere, providing relay services for wireless communication networks. These platforms are an alternative to increase the effectiveness of future communication. Nevertheless, the power system is a key part that determines the implementation and feasibility of these platforms. One effective and renewable option to power an HALE aircraft is a photovoltaic system (PVS) with hydrogen storage. In this paper, the simulation of the solar/hydrogen closed loop system is carried out for a parametric combination of the subsystems power. Power consumption of the propeller was determined as a function of the aircraft weight in steady flight and in still air. In order to obtain the optimal nominal powers the efficacies are calculated at hourly intervals over the course of the year by means of an analytical energy balance. The proposed method was implemented in an algorithm, which allows fast estimation of the actual time of flight and the system efficiency. Finally, the energy system of three HALE aircrafts was analyzed in relation of their wing area and total and empty mass.     

Biogenic amines assessment during different stages of the canning process of skipjack tuna (Katsuwonus pelamis)

The present research focused on the biogenic amines (BAs) formation in skipjack tuna (Katsuwonus pelamis) throughout the whole canning process. In agreement with its wide employment on this species, on‐board brine immersion freezing (BIF) was tested as post‐mortem processing. The study included fish samples corresponding to different stages of the canning process such as frozen, thawed, cooked and canned; after cooking, two kinds of tuna muscles were considered, that is, whole fillets (main product) and grated muscle (off‐product arising from small pieces). For the BAs (tryptamine, putrescine, cadaverine, histamine, spermidine and spermine) assessment, an HPLC‐DAD method was developed and validated in skipjack tuna samples, in agreement with different parameters such as suitability, linearity, limits of detection and quantification, precision, accuracy and robustness. Tuna submitted on‐board to BIF procedure provided low levels of spermine and spermidine (up to 27.6 mg kg^?1), while contents on the remaining BAs maintained below the limit of detection. Throughout the different stages of the canning process, skipjack tuna showed a low formation of most BAs; interestingly, histamine content was found below 10.6 mg kg^?1 level. The highest values were obtained for spermidine, these related to cooked grated tuna (from 22.6 to 66.7 mg kg^?1) and canned grated tuna (from 70.6 to 104.4 mg kg^?1). Values for pH assessment in all kinds of tuna samples corroborated the results obtained for BAs determination. BIF procedure proved to be an amenable post‐mortem processing to guarantee the quality of canned skipjack tuna.     

Evaluation of the effect of heat input in superduplex stainless steel deposition by the plasma powder process*

Plasma powder surfacing is one of the latest processes for application of coatings, with control of dilution as its main feature. Surfacing with superduplex stainless steels is an interesting option for the construction and repair of equipment for applications in a highly corrosive environment, allowing the desired characteristics to be achieved: corrosion resistance and good mechanical properties. The aim of this work is to assess the ferrite content in the weld metal and the mechanical characteristics via microhardness profiles in surfacing of C-Mn steel pipes with deposition of UNS S32760 by plasma powder surfacing. Welding operations were carried out on pipes with deposition of SDSS, employing three welding heat input levels, varying the welding speed or the welding current. Then the geometry was analysed, the ferrite content in the weld metal was quantified and the microhardness profile was recorded. Variation in welding heat input caused changes in weld bead geometry, with variation in the welding current producing the most significant changes. Increase in heat input caused decrease in ferrite content of the weld metal. Regarding microhardness, only the condition with a higher level of welding current gave sufficiently high levels of microhardness in the weld metal.     

A comparative study of the behavior of Chlamydomonas reinhardtii and Spirulina platensis in solar catalytic pyrolysis

The aim of this study was to investigate the behavior of two distinct microalgae species during solar catalytic pyrolysis and the influence of their chemical composition and the process variables (biomass charge, reaction time, and catalyst percentage) on the product yields and bio-oil composition. For this purpose, solar catalytic pyrolysis of Spirulina platensis and Chlamydomonas reinhardtii was performed using hydrotalcite-derived mixed oxides as the catalyst. To gain more insight into the effect of composition on pyrolysis behavior, the biomasses were analyzed using various analytical techniques. The results indicated that a high percentage of catalyst (47.1%) culminated in liquid yields of 42.48% and 21.31% for Chlamydomonas pyrolysis and Spirulina pyrolysis, respectively. Additionally, Spirulina pyrolysis resulted in higher solid yields compared with Chlamydomonas pyrolysis. The results also showed that Spirulina bio-oil was rich in oxygenated compounds, probably due to its high carbohydrate content, whereas Chlamydomonas bio-oil was rich in nitrogenated compounds because of its higher protein content. The microalgae composition (lipids, protein, carbohydrates) exerted a large influence on the catalytic pathways and led to differences in yield and product distribution. A high percentage of catalysts preferentially promoted a deoxygenation of the bio-oil obtained from Spirulina solar pyrolysis compared with that obtained from Chlamydomonas pyrolysis.     

Performance evaluation and tuning of an IEEE 802.11 audio video multicast collision prevention mechanism

Wireless Networks - Since the introduction of the original IEEE 802.11 medium access mechanism, the definition of the multicast access mechanism has been the subject of numerous amendments and...