Development of a chitosan-based biofoam: application to the processing of a porous ceramic material

Developing biofoams constitutes a challenging issue for several applications. The present study focuses on the development of a chitosan-based biofoam. Solutions of chitosan in acetic acid were dried under vacuum to generate foams with high-order structures. Chitosan concentration influenced significantly the morphology of developed porosity and the organization of pores in the material. Physico-chemical characterizations were performed to investigate the effects of chitosan concentration on density and thermal conductivity of foams. Even if chitosan-based biofoams exhibit interesting insulating properties (typically around 0.06 W·m(-1)·K(-1)), it has been shown that their durabilities are limited when submitted to a wet media. So, a way of application consists to elaborate a ceramic material with open porosity from a slurry prepared with an organic solvent infiltrating the porous network of the foam.     

Natural convection in an air-filled cavity: Experimental results at large Rayleigh numbers

A large-scale experimental setup is built and instrumented. It consists in a 4 m-high cavity with a horizontal cross-section equal to 0.86 × 1.00 m². Two opposite vertical walls are heated and cooled down; other walls (lateral walls, ceiling and floor) are made of insulating medium covered with a thin and low-emissivity film designed to minimize radiative effects into the cavity. The temperatures of active walls are imposed, constant and equally distributed around the ambient temperature in order to reduce heat losses. The temperature difference between the hot and cold walls is chosen to respect the Boussinesq approximation. Under these assumptions, Rayleigh number values up to 1.2 × 10¹¹ (ΔT = 20 °C) can be obtained. The centre-symmetry is verified on the thermal stratification. Influence of the temperature difference and of wall emissivities on the stratification parameter (dimensionless vertical temperature gradient) is discussed. Velocity measurements allow the velocity field to be obtained and provide information on flows encountered in the cavity. Temperature measurements are also carried out in the whole cavity. In the paper, a complete experimental characterization is provided: airflow inside the cavity is analyzed and the Nusselt number along the hot and the cold wall is presented.     

Strontium and cesium release mechanisms during unsaturated flow through waste-weathered Hanford sediments

Leaching behavior of Sr and Cs in the vadose zone of Hanford site (Washington) was studied with laboratory-weathered sediments mimicking realistic conditions beneath the leaking radioactive waste storage tanks. Unsaturated column leaching experiments were conducted using background Hanford pore water focused on first 200 pore volumes. The weathered sediments were prepared by 6 months reaction with a synthetic Hanford tank waste leachate containing Sr and Cs (10(-5) and 10(-3) molal representative of LO- and HI-sediment, respectively) as surrogates for (90)Sr and (137)Cs. The mineral composition of the weathered sediments showed that zeolite (chabazite-type) and feldspathoid (sodalite-type) were the major byproducts but different contents depending on the weathering conditions. Reactive transport modeling indicated that Cs leaching was controlled by ion-exchange, while Sr release was affected primarily by dissolution of the secondary minerals. The later release of K, Al, and Si from the HI-column indicated the additional dissolution of a more crystalline mineral (cancrinite-type). A two-site ion-exchange model successfully simulated the Cs release from the LO-column. However, a three-site ion-exchange model was needed for the HI-column. The study implied that the weathering conditions greatly impact the speciation of the secondary minerals and leaching behavior of sequestrated Sr and Cs.     

Online shear viscosity measurement of starchy melts enriched in wheat bran

Abstract: Addition of wheat bran to flours modifies their expansion properties after cooking extrusion. This can be attributed to changes in the melt shear viscosity at the die. The effect of wheat bran concentration added to achieve 2 levels of dietary fibers of 12. 6% and 24.4%, and process conditions on the shear viscosity of wheat flour was therefore assessed using an online twin‐slit rheometer. The shear viscosity measured at 30 s^?1 ranged from 9.5 × 10³ to 53.4 × 10³ Pa s. Regardless of the process conditions and bran concentration, the extruded melts showed a pseudoplastic behavior with a power law index n ranging from 0.05 to 0.27. Increasing the barrel temperature of the extruder from 120 to 180 °C, the water content from 18% to 22% or the screw speed from 400 to 800 rpm significantly decreased the melt shear viscosity at the extruder exit. The addition of bran significantly increased the melt shear viscosity only at the highest bran concentration. The effect was process condition dependant. Mathematical interpretations, based upon observations, of the experimental data were carried out. They can be used to predict the effect of the process conditions on the melt shear viscosity at the die of extruded wheat flour with increasing bran concentration. The viscosity data will be applied in future works to study the expansion properties of extruded wheat flour supplemented with bran. Practical Application: Incorporation of wheat bran, a readily available and low cost by‐product, in extruded puffed foods is constrained due to its negative effect on the product texture. Understanding the effect of wheat bran on rheological properties of extruded melts, driving the final product properties, is essential to provide solutions to the food industry and enhance its use.     

Multilocus sequence typing of Propionibacterium freudenreichii

Propionibacterium freudenreichii is used as a ripening culture in Swiss cheese manufacture. This study investigates the molecular diversity and the population structure of this bacterium via multilocus sequence typing (MLST). Internal fragments of seven genes sequenced for 113 strains of different subspecies and origins allowed the resolution of 46 sequence types (STs) with occurrence frequencies ranging from 1 to 11. The core genome of the species harbours a low level of nucleotide polymorphism. In our data, single nucleotide polymorphisms account for only 2.28% of the concatenated sequences, and the average polymorphism rate in pairwise comparisons is 0.46%. The analyses reveal quantitatively comparable contributions of recombination and mutation in nucleotide changes at core genome loci along cell lineages. Remarkably, the STs exhibit little if any dairy biotope specialization. Phenotypic characterisation of the strains, based on their aptitude to use lactose and nitrate, shows that the two previously identified subspecies (freudenreichii and shermani) do not reflect the ancestral relationships in the P. freudenreichii population. The considerable phenotypic heterogeneity, found even at the ST level, suggests instead a history of recurrent switches between phenotypes.     

Influence of band selection and target estimation error on the performance of the matched filter in hyperspectral imaging

The matched filter is a widely used detector in hyperspectral detection applications because of its simplicity and its efficiency in practical situations. We propose to estimate its performance with respect to the number of spectral bands. These spectral bands are selected thanks to a genetic algorithm in order to optimize the contrast between the target and the background in the detection plane. Our band selection method can be used to optimize not only the position but also the linewidth of the spectral bands. The optimized contrast always increases with the number of selected bands. However, in practical situations, the target spectral signature has to be estimated from the image. We show that in the presence of estimation error, the maximum number of bands may not always be the best choice in terms of detection performance.     

Performance predictions improve prospective memory and influence retrieval experience.

In retrospective memory, performance predictions have been found to enhance performance on subsequent memory tests. In prospective memory, the influence of metacognitive judgments on performance has not been investigated systematically. In the present study, 140 undergraduate students performed a complex short-term memory task that included a prospective memory task. Half of them gave performance predictions after the prospective memory task instructions. In addition, the specificity of the prospective memory task was manipulated by instructing participants either to perform an action when a word that belongs to the category of musical instruments was presented or to respond when the word “trumpet” was presented. The results showed that performance predictions enhanced performance, but only for the categorical task. Additional analyses of retrieval experience showed that performance predictions lead to an increase in search experiences while cue specificity was accompanied by an increase in pop up experiences. The results indicate that performance predictions can improve prospective performance and thus may be a valuable strategy for assisting prospective memory. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Design of Catalytically Active Cylindrical and Macroporous Gold Microelectrodes

Porous gold structures with a well‐defined pore size and thickness are obtained through electrochemical deposition of gold in a colloidal crystal template synthesized by the Langmuir–Blodgett (LB) technique. Cylindrical gold wires were used as substrates for the LB deposition of successive monolayers of silica particles of various sizes, and the electrodeposition of gold through this inorganic template led to a homogeneous, porous metal structure. These materials were characterized through typical electrochemical experiments and showed high surface‐to‐volume ratios with promising features for their further use in miniaturized electrocatalytic devices.