Minimizing metastabilities in Cu(In,Ga)Se2/(CBD)Zn(S,O,OH)/i‐ZnO‐based solar cells

Chemical bath deposited (CBD)Zn(S,O,OH) is among the alternatives to (CBD)CdS buffer layers in Cu(In,Ga)Se₂(CIGSe)‐based devices. Nevertheless, the performances reached by devices buffered with (CBD)Zn(S,O,OH) vary strongly from one sample to another and from one laboratory to another, indicating that parameters of minority impact with (CBD)CdS‐buffered devices have major influence when buffered with (CBD)Zn(S,O,OH). Moreover, the literature reports, but not systematically, the requirement of substituting the standard resistive intrinsic ZnO by (Zn,Mg)O and/or soaking the devices in ultraviolet‐containing light in order to reach optimal device operation. The present study investigates the impact of the three following parameters on the optoelectronic behavior of the Cu(In,Ga)Se₂/(CBD)Zn(S,O,OH)/i‐ZnO‐based solar cells: (i) CIGSe surface composition; (ii) (CBD)Zn(S,O,OH) layer thickness; and (iii) i‐ZnO layer resistivity. The first conclusion of this study is that all of these parameters are observed to influence the electrical metastabilities of the devices. The second conclusion is that the light soaking time needed to achieve optimal photovoltaic parameters is decreased by (i) using absorbers with Cu content close to stoichiometry, (ii) increasing the buffer layer thickness, and (iii) increasing the resistivity of i‐ZnO. By optimizing these trends, stable and highly efficient Zn(S,O,OH)‐buffered CIGSe solar cells have been fabricated. Copyright © 2014 John Wiley & Sons, Ltd.     

The digital traces of bubbles: feedback cycles between socio-economic signals in the Bitcoin economy

What is the role of social interactions in the creation of price bubbles? Answering this question requires obtaining collective behavioural traces generated by the activity of a large number of actors. Digital currencies offer a unique possibility to measure socio-economic signals from such digital traces. Here, we focus on Bitcoin, the most popular cryptocurrency. Bitcoin has experienced periods of rapid increase in exchange rates (price) followed by sharp decline; we hypothesize that these fluctuations are largely driven by the interplay between different social phenomena. We thus quantify four socio-economic signals about Bitcoin from large datasets: price on online exchanges, volume of word-of-mouth communication in online social media, volume of information search and user base growth. By using vector autoregression, we identify two positive feedback loops that lead to price bubbles in the absence of exogenous stimuli: one driven by word of mouth, and the other by new Bitcoin adopters. We also observe that spikes in information search, presumably linked to external events, precede drastic price declines. Understanding the interplay between the socio-economic signals we measured can lead to applications beyond cryptocurrencies to other phenomena that leave digital footprints, such as online social network usage.     

Pedestrian preferences with respect to roundabouts—A video-based stated preference survey

Research on user behavior and preferences has been a helpful tool in improving road safety and accident prevention in recent years. At the same time, there remain some important areas of road safety and accident prevention for which user preferences, despite their importance, have not been explored. Most road safety research has not explicitly addressed vulnerable user (pedestrians and cyclists) preferences with respect to roundabouts, despite their increasing construction around the world. The present research stems from the fact that studies related to roundabout safety have generally focused on drivers, while overlooking the importance of safety as it relates to vulnerable users, especially pedestrians. Moreover, it handles this particular issue through an approach that has not been used so far in this context; the Stated Preference (SP) survey. As such, there are two main goals (and contributions) of this work. First, to show how SP surveys can be used to investigate the importance of different design and operational features to pedestrian perceptions of safety in roundabouts. This allows us, for example, to quantify how some features of roundabouts (e.g. high traffic volume) can be compensated for by design features such as pedestrian islands. This is useful in helping to design roundabouts that pedestrians prefer and will hopefully use, to help encourage active transport. Second, to demonstrate how traffic simulation software can be successfully used to include difficult-to-communicate attributes in SP surveys.     

Graphene masks as passivation layers in the electrochemical etching of silicon

Site-specific masking with graphene films has the potential to facilitate low-cost, high-throughput micro-patterns on silicon substrates over large areas. Here, a facile approach to using graphene as a masking agent on silicon wafers for site-specific patterning is demonstrated. Graphene sheets were deposited via a sealing-tape-exfoliation method onto hydride-terminated (Si–H) silicon substrates. Raman confocal mapping showed inhibition of oxidation of the Si wafer underlying the graphene, indicating that the graphene restricts the diffusion of oxygen onto the Si surface. The graphene coated Si substrates were then electrochemically etched in an aqueous HF/ethanol (3:1 (v/v)) anodization solution. Scanning electron microscopy showed that the graphene layer successfully restricted the etching of the Si surface, however, near the edge sites of the graphene deep etching occurred.     

Integration of Self‐Assembled Epitaxial BiFeO3–CoFe2O4 Multiferroic Nanocomposites on Silicon Substrates

Perovskite‐spinel epitaxial nanocomposite thin films are commonly grown on single crystal perovskite substrates, but integration onto a Si substrate can greatly increase their usefulness in devices. Epitaxial BiFeO₃–CoFe₂O₄ nanocomposites consisting of CoFe₂O₄ pillars in a BiFeO₃ matrix are grown on (001) Si with two types of buffer layers: molecular beam epitaxy (MBE)‐grown SrTiO₃‐coated Si and pulsed‐laser‐deposited (PLD) Sr(Ti_0.65Fe_0.35)O₃/CeO₂/yttria‐stabilized ZrO₂/Si. The nanocomposite grows with the same crystallographic orientation and morphology as that observed on single crystal SrTiO₃ when the buffered Si substrates are smooth, but roughness of the Sr(Ti_0.65Fe_0.35)O₃ promoted additional CoFe₂O₄ pillar orientations with 45° rotation. The nanocomposites on MBE‐buffered Si show very high magnetic anisotropy resulting from magnetoelastic effects, whereas the hysteresis of nanocomposites on PLD‐buffered Si can be understood as a combination of the hysteresis of the Sr(Ti_0.65Fe_0.35)O₃ film and the CoFe₂O₄ pillars.     

Improvement of PDP discharge efficiency based on macro‐cell studies

Abstract— In this paper we explain how macro‐cells (real PDP cells scaled‐up a hundred times) with external and removable electrodes have been validated by comparison with real panels and modeling and used to optimize the luminous efficacy of real PDPs. We illustrate the application of the macroscopic PDP tool to optimize the electrode configuration of short‐gap discharges towards higher luminous efficacy, as well as its use in conjunction with 2D and 3D modeling to lower the operating voltages of high‐efficacy long‐gap discharges triggered by auxiliary electrodes.     

Contribution of cutinase serine 42 side chain to the stabilization of the oxyanion transition state

Cutinase from the fungus Fusarium solani pisi is a lipolytic enzyme able to hydrolyze both aggregated and soluble substrates. It therefore provides a powerful tool for probing the mechanisms underlying lipid hydrolysis. Lipolytic enzymes have a catalytic machinery similar to those present in serine proteinases. It is characterized by the triad Ser, His, and Asp (Glu) residues, by an oxyanion binding site that stabilizes the transition state via hydrogen bonds with two main chain amide groups, and possibly by other determinants. It has been suggested on the basis of a covalently bond inhibitor that the cutinase oxyanion hole may consist not only of two main chain amide groups but also of the Ser42 O gamma side chain. Among the esterases and the serine and the cysteine proteases, only Streptomyces scabies esterase, subtilisin, and papain, respectively, have a side chain residue which is involved in the oxyanion hole formation. The position of the cutinase Ser42 side chain is structurally conserved in Rhizomucor miehei lipase with Ser82 O gamma, in Rhizopus delemar lipase with Thr83 O gamma 1, and in Candida antartica B lipase with Thr40 O gamma 1. To evaluate the increase in the tetrahedral intermediate stability provided by Ser42 O gamma, we mutated Ser42 into Ala. Furthermore, since the proper orientation of Ser42 O gamma is directed by Asn84, we mutated Asn84 into Ala, Leu, Asp, and Trp, respectively, to investigate the contribution of this indirect interaction to the stabilization of the oxyanion hole. The S42A mutation resulted in a drastic decrease in the activity (450-fold) without significantly perturbing the three-dimensional structure. The N84A and N84L mutations had milder kinetic effects and did not disrupt the structure of the active site, whereas the N84W and N84D mutations abolished the enzymatic activity due to drastic steric and electrostatic effects, respectively.     

Nickel and nickel-phosphorous matrix composite electrocoatings

Nickel and nickel-phosphorous matrix composite coatings reinforced by TiO₂, SiC and WC particles were produced under direct and pulse current conditions from an additive-free Watts' type bath. The influence of the variable electrolysis parameters (type of current, frequency of current pulses and current density) and the reinforcing particles properties (type, size and concentration in the bath) on the surface morphology and the structure of the deposits was examined. It is demonstrated that the embedding of ceramic particles modifies in various ways the nickel electrocrystallisation process. On the other hand, Ni-P amorphous matrix is not affected by the occlusion of the particles. Overall, the imposition of pulse current conditions leads to composite coatings with increased embedded percentage and more homogenous distribution of particles in the matrix than coatings produced under direct current regime.