A good practice for making training accessible to university faculty members through ICTs: syllabus planning support training

Universal Access in the Information Society - This study focuses on a case study developed at a higher education institution, which comprises developing a new virtual teaching unit (VTU) aimed at...     

Corrosion of Mg alloys EV31A,WE43B,and ZE41A in chloride- and sulfate-containing solutions saturated with magnesium hydroxide

This study studied corrosion in 0.1 M Na₂SO₄, 0.1 M NaCl, and 0.6 M NaCl, all saturated with Mg(OH)₂, using weight loss, hydrogen evolution, and electrochemical measurements. Corrosion was similar in all cases. Nevertheless, the corrosion rates were alloy-dependent, were somewhat lower in 0.1 M Na₂SO₄ than in 0.1 M NaCl, and increased with NaCl concentration. The corrosion damage morphology was similar for all solutions; the extent correlated with the corrosion rate. The corrosion rates evaluated by the electrochemical methods were lower than those evaluated from hydrogen evolution, consistent with the Mg corrosion mechanism involving the unipositive Mg⁺ ion.     

Design methodology for barrier‐based two phase flow distributor

The barrier‐based distributor is a multiphase flow distributor for a multichannel microreactor which assures flow uniformity and prevents channeling between the two phases. For N number of reaction channels, the barrier‐based distributor consists of a gas manifold, a liquid manifold, N barrier channels for the gas, N barrier channels for the liquid, and N mixers for mixing the phases before the reaction channels. The flow distribution is studied numerically using a method based on the hydraulic resistive networks (RN). The single phase hydraulic RN model (Commenge et al., 2002;48:345–358) is extended for two phases gas‐liquid Taylor flow. For Re_GL <30, the accuracy for the model was above 90%. The developed‐model was used to study the effects of fabrication tolerance and barrier channel dimensions. A design methodology has been proposed as an algorithm to determine the required hydraulic resistance in the barrier channels and their dimensions. This methodology is demonstrated using a numerical example. © 2012 American Institute of Chemical Engineers AIChE J, 2012     

Improvement of the production of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) terpolyester by manipulating the culture condition

BACKGROUND: The aim of this work is to enhance the production of terpolyester poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate‐co‐4‐hydroxybutyrate) (P(3HB‐co‐3HV‐co‐4HB)) produced by a locally isolated bacterium, Cupriavidus sp. USMAA2‐4. The monomer composition was varied by supplementing different carbon precursors and by manipulating the culture condition through one‐stage cultivation. The effect of C/N ratio and different concentrations of carbon source and precursors were investigated in order to produce higher content of this terpolyester. Although research on this biodegradable polyester is abundant, studies on terpolyester P(3HB‐co‐3HV‐co‐4HB) are still limited. RESULTS: Supplementation of oleic acid in accumulation medium increased the bacterial growth and polyhydroxyalkanoate (PHA) accumulation. It was also shown that medium consisting of assorted carbon precursors at C/N 20 gave relatively high dry cell weight and P(3HB‐co‐3HV‐co‐4HB) content. Various compositions of terpolyester were obtained when the concentration of oleic acid and 4HB precursors were manipulated. The combination of oleic acid with γ‐butyrolactone and 1‐pentanol was found to be the best combination to produce high PHA content (81 wt%). The composition of monomer in P(3HB‐co‐3HV‐co‐4HB) was produced in the range 8–13 mol% for 3HV and 9–24 mol% for 4HB, respectively. CONCLUSIONS: The production of P(3HB‐co‐3HV‐co‐4HB) in shake‐flasks successfully produced 81 wt% of PHA content. This manipulated culture condition can be used at larger scale to provide modeling for the production of terpolyester in a bioreactor. Copyright © 2012 Society of Chemical Industry     

Preparation and characterizations of activated carbon from kenaf fiber for equilibrium adsorption studies of copper from wastewater

The potential of activated carbon prepared from kenaf fiber (KF) to remove copper (II) from aqueous effluents was investigated. The fibers were first semi-carbonized, then impregnated with potassium hydroxide (KOH) and finally activated by using carbon dioxide (CO₂) gas to produce activated carbon. Pore structure and physical characteristics of the prepared kenaf fiber activated carbon (KFAC) were determined. Adsorption studies for divalent copper (Cu) ions were carried out to delineate the effect of contact time, temperature, pH and initial metal ion concentration on equilibrium adsorption capacity. The experimental data followed pseudo-second-order kinetics and Elovich Model than pseudo-first-order. Langmuir, Freundlich and Temkin models were implemented to analyze the parameters for adsorption at 30 °C, 50 °C and 70 °C. Thermodynamic parameters such as ??G ^o , ??H ^o and ??S ^o which represent Gibbs free energy, enthalpy and entropy, respectively, were evaluated. It was concluded that activated carbon from kenaf fiber (KFAC) can be used as an efficient adsorbent for removal of Cu (II) from synthetic wastewater.     

Batch and Fed‐Batch Degradation of Enrofloxacin by the Fenton Process

Enrofloxacin is a synthetic second‐generation fluoroquinolone used as an antimicrobial agent exclusively in veterinary medicine. To simulate the treatment of wastewater contaminated by enrofloxacin, four‐day long fed‐batch runs were carried out according to the Fenton process with an enrofloxacin solution as model, to which hydrogen peroxide and ferrous ion were added twice a day. The residual enrofloxacin concentration was practically coincident to that detected at the end of the batch tests. Hydrogen peroxide was almost completely consumed after each feeding period, while the total organic carbon (TOC) concentration decreased gradually within three days, corresponding to a reduction > 58 %. From the third day on, the TOC falling rate was quite low. A yellow sludge settled due to the precipitation of both Fe(OH)₃ and a complex formed by ferric ion with adsorbed enrofloxacin and/or its oxidation products.     

Analytical and numerical assessments of local overpressure from hydrogen gas explosions in petrochemical plants

Accurate prediction of pressure rise is important for safety assessments of a petrochemical plant in the event of an explosion accident. The sudden pressures arising from gas explosions at various hydrogen concentrations in air have been predicted analytically and numerically. These solutions were compared against experimental data. The analytical solution, based on the self‐similar solution for pointwise strong explosions in an open space, which assumed no energy loss and premixed fuel‐air mixture, reasonably predicted the explosive‐ignition detonation case while the numerical solutions were more suitable to model spark‐ignition deflagration cases that accounted for the effect of turbulence arising from three‐dimensionality and presence of obstacles in the computational domain. Comparison of both analytical and numerical results against experimental data indicates that their differences are within a 30% margin. The analytical model presented herein can be useful for field engineers who want conservative estimates of the overpressure resulting from explosive‐ignition detonation. Copyright © 2016 John Wiley & Sons, Ltd.     

Electrical discharges with liquid electrodes used in water decontamination

The results of experimental investigation of the DC electrical discharge with moving air bubbles in the electrolyte, as well as of high frequency electrical discharge with a diaphragm membrane, within a wide parameter range are presented. We investigated active component formation and enhancement of the wastewater decontamination by means of production of a disinfecting agent with a maximal content of the electrical discharge products (copper and silver ions and hydrogen peroxide).     

Curing enhancement and network effects in multi‐walled carbon nanotube‐filled vulcanized natural rubber: evidence for solvent sensing

Electrically and thermally conductive polymer composites offer great possibilities in various electronic fields because of their low weight and ease of processing. This paper addresses the curing behaviour and network properties of conducting multi‐walled carbon nanotube (MWCNT)‐reinforced natural rubber (NR) nanocomposites, emphasizing the sensing and diffusion performances. NR/MWCNT composites were prepared following a special master batch technique which allows the appropriate distribution of nanotubes within the elastomer. The sensing responses of the composites towards solvents were observed as variations in electrical resistance. Thermal resistance and glass transition behaviour were examined and correlated with the swelling measurements as evidence for solvent sensing. An optimum level of 3 phr of MWCNTs is understood to lead to the best properties for the NR/MWCNT composites. Finally, the structural morphology and interfacial interactions were found to have correlations with cure reactions, glass transition temperatures and sensing responses of all compositions. © 2017 Society of Chemical Industry     

Small/medium nuclear reactors for potential desalination applications : Mini review

Small/medium nuclear reactors (SMRs) are a promising alternative for powering large scale desalination plants. The modern generations of these systems manifest cost effectiveness and built-in safety features. The compatibility with geological and topological challenges is an added advantage. Moreover, funding opportunities and packages could be easily arranged for small/medium nuclear reactors (SMR). This mini review article provides the latest technical features of SMR nuclear plants with emphasis on pressurized light water reactors (PWR), boiling water reactors (BWR), heavy water reactors (HWR), gas cooled reactors (GCR), and liquid metal fast breeder reactors (LMFBR). Preliminary cost indicators for typical units were investigated as a part of joint effort to develop a cost database for these types of reactors. Security and safety features of small/medium reactors are identified and reviewed. This paper identifies and briefly discusses the various types of small/medium nuclear reactors to provide a preliminary evaluation and consideration of using this type of reactor in potential seawater desalination applications.