Effectiveness of some diquaternary ammonium surfactants as corrosion inhibitors for carbon steel in 0.5 M HCl solution

Four Gemini surfactants were synthesized and characterized using elemental analysis, FTIR and ¹H NMR spectroscopy. The synthesized compounds were evaluated as corrosion inhibitors for carbon steel in 0.5 M HCl solution. The inhibition efficiencies of the tested inhibitors were depended on the hydrophobic chain length and the used doses of the inhibitors. The polarization measurements showed that these inhibitors are acting as mixed inhibitors for both anodic and cathodic reactions. The results showed that the inhibition efficiencies were increased by increasing the inhibitor doses and the hydrophobic chain length and reached the maximum at 500 ppm by weight for stearyl derivative. The efficiencies obtained from the impedance measurements were in good agreement with those obtained from the gravimetrical and polarization techniques which prove the validity of these tolls in the measurements of the tested inhibitors.     

Developing Crew Allocation System for the Precast Industry Using Genetic Algorithms

Abstract: The Precast Concrete Industry (PCI) is one of the major contributors to the national economy and can be categorized as labor‐intensive industry. It is currently experiencing shortcomings in terms of delivery products at a competitive cost and time. This is mainly due to the inefficiencies associate with planning and scheduling of skilled operators within crew configurations. This article presents a new strategy for efficient allocation of crews of workers in the precast concrete industry using Genetic Algorithms‐based simulation modeling. The aim of this study is to develop a crew allocation system that can efficiently allocate possible crews of workers to precast concrete labor‐intensive repetitive processes. Genetic algorithms (GAs) have been developed to solve this type of problem. Process mapping methodologies were used to identify and document the processes involved in producing precast components. Then process simulation was used to model and simulate all these processes and GAs were tailored to be embedded with the simulation model for a better search of promising solutions. GA operators were designed to suit this type of allocation problem. “Class Interval” selection strategy was developed to give a greater opportunity for the promising chromosomes to be chosen for further investigation. Dynamic crossover and mutation operators were developed to add more randomness to the search mechanism. The results showed that adopting different combinations of crews of workers had a substantial impact on reducing the process throughput time, minimizing resources cost, and achieving the required operatives utilization.     

Electrical filtration of dielectric liquids from semiconducting and conducting particles

Certain problems of electrical purification of dielectric oils (for example, transformer oil) to remove micron-sized semiconducting and conducting particles are considered. A solution of the problem concerning the dependence of the particle concentration on the time in the output of an electrofilter both at a zero and a nonzero flow rate is given. It is shown that, in both cases, the mathematical structure of the solutions is the same. Thus, it is possible to use the same formulas with the parameters of the given mode. Physical and mathematical interpretations of the experimental results are proposed. Equations for the theoretical dependences corresponding to the experimental ones are obtained and their graphs are plotted. The experimental data, which are in good agreement with the theoretical results, are generalized using dimensionless logarithmic equations.     

SPARCL: an effective and efficient algorithm for mining arbitrary shape-based clusters

Clustering is one of the fundamental data mining tasks. Many different clustering paradigms have been developed over the years, which include partitional, hierarchical, mixture model based, density-based, spectral, subspace, and so on. The focus of this paper is on full-dimensional, arbitrary shaped clusters. Existing methods for this problem suffer either in terms of the memory or time complexity (quadratic or even cubic). This shortcoming has restricted these algorithms to datasets of moderate sizes. In this paper we propose SPARCL, a simple and scalable algorithm for finding clusters with arbitrary shapes and sizes, and it has linear space and time complexity. SPARCL consists of two stages—the first stage runs a carefully initialized version of the Kmeans algorithm to generate many small seed clusters. The second stage iteratively merges the generated clusters to obtain the final shape-based clusters. Experiments were conducted on a variety of datasets to highlight the effectiveness, efficiency, and scalability of our approach. On the large datasets SPARCL is an order of magnitude faster than the best existing approaches.     

The effect of elevated inlet air temperature and relative humidity on cogeneration system

The effect of elevated inlet air temperature and relative humidity on a gas turbine (GT) cogeneration system performance was investigated. The analysis was carried out on a GT of a capacity 171 MW at ISO condition, which is integrated with a dual pressure heat recovery steam generator (HRSG), the cogeneration system had been tested under Kuwait summer climate conditions. A computational model was developed and solved using engineering equation solver professional package to investigate the performance of a dual pressure GT‐HRSG system. The suggested HRSG is capable of producing high‐pressure superheated steam at 150 bar and 510°C to operate a power generation steam turbine cycle, and a medium pressure saturated steam at 15 bar to run a thermal vapor compression (TVC) desalination system. In this research, the influence of elevated inlet air temperature and relative humidity on the energy assessment of the suggested cogeneration system was thoroughly investigated. Results indicated that operating GT under elevated values of inlet air temperatures is characterized by low values of net power and thermal efficiency. At elevated inlet air temperatures, increasing relative humidity has a small positive impact on GT cycle net power and thermal efficiency. Integrating the GT with HRSG to generate steam for power generation and process heat tends to increase energy utilization factor of the system at elevated inlet air temperatures. Increasing inlet air temperature plays a negative impact on power to heat ratio (PHR), while relative humidity has no effect on PHR. Copyright © 2009 John Wiley & Sons, Ltd.     

Economic evaluation of floating gardening as a means of adapting to climate change in Bangladesh

This paper offers an economic evaluation of the floating garden as a means of adapting to climate change in Bangladesh. The study showed that the monthly income of some farmers using such gardens increased from US$12.02 to US$48.08. These folk farmers lacked alternative work especially during the monsoon period. The floating garden uses available natural resources, adjusts to wet conditions and helps the flood-prone people to earn a living, and can be an adaptive response to frequent disaster events in Bangladesh.     

Processor control in computerized data-acquisition systems

A method is proposed for detecting single and double processor errors during arithmetic and logicaloperations with reduced time consumption.     

Identification and Effects of Interaction Phytotoxic Compounds from Exudate of Cistus ladanifer Leaves

Eleven allelochemicals (ferulic acid, cinnamic acid, 4-hydroxybenzoic acid, hydroxycinnamic acid, methyl propionate, oxalic acid, methylmalonic acid, p-anisic acid, butyric acid, 3-hydroxybutyric acid, and azulene) were identified in the exudate of Cistus ladanifer L. We studied the effect of each on germination, cotyledon emergence, root length, and cotyledon length of Rumex crispus. Three groups were distinguished with respect to phytotoxic activity: compounds with low activity (ferulic acid, 4-hydroxybenzoic acid, oxalic acid, methylmalonic acid, p-anisic acid, hydroxybutyric acid, and azulene), with intermediate activity (cinnamic acid and hydroxycinnamic acid), and with high activity (methyl propionate and butyric acid). The effect of the interaction of the compounds was studied. When acting conjointly, all combinations tested produced a more negative effect on both germination and seedling growth than when acting alone. The interaction affected cotyledon emergence and root length more negatively than germination and cotyledon length. When hydroxycinnamic acid and cinnamic acid were added to these mixtures there was an enhancement in the phytotoxic activity, accentuating the effect of the other allelochemicals.     

Analysis of aggregate electricity intensity change of the Jordanian industrial sector using decomposition technique

This study analyzes changes in industrial aggregate electricity intensity, during the period 1998–2005, and identifies major factors affecting the aggregate electricity intensity change using the refined Laspeyers method decomposition technique. The Jordanian industrial sector was disaggregated into seven groups: mining of chemical and fertilizers, paper, plastics, petrochemical, cement, steel and others industries. Aggregate electricity intensity has decreased from approximately 1.30 to 0.93 kWh USThis study analyzes changes in industrial aggregate electricity intensity, during the period 1998–2005, and identifies major factors affecting the aggregate electricity intensity change using the refined Laspeyers method decomposition technique. The Jordanian industrial sector was disaggregated into seven groups: mining of chemical and fertilizers, paper, plastics, petrochemical, cement, steel and others industries. Aggregate electricity intensity has decreased from approximately 1.30 to 0.93 kWh US$^?1 in 1998 and 2005, respectively. The analysis showed that the structural and efficiency effects contribute to decreases of around 21 and 79%, respectively, of total aggregate electricity intensity decline in the industrial sector. Such result is considered of high importance for energy and/or electricity analysts and planners, in Jordan and other countries, especially for the purpose of forecasting future demand more logically and without unnecessary exaggerations. Copyright © 2008 John Wiley & Sons, Ltd.     

BANQ餐厅 美国波士顿

正Banq餐厅位是一家新型餐厅,位于便士储蓄银行(Penny Savings Bank)旧大楼以前用来经营银行业务的大厅内。餐厅分成两个部分,前面区域面向华盛顿大街,设计成酒吧,后面的大厅则作为用餐区。然而,这个空间在z轴上以天花板和地面之间的另一个分区为中心进行设计。如果由于餐厅空间活动的多变性而需要保持灵活性——包括两个座位、四个座位和六个座位,以及与聚会和其他活动有关的座位