A note on the time travel approach for handling time windows in vehicle routing problems

In this paper, we identify two cases in which the proposition for calculating time window penalties presented in Nagata, Y., Bräysy, O. and Dullaert, W. A penalty-based edge assembly memetic algorithm for the vehicle routing problem with time windows, Computers & Operations Research 2010;37(4): 724–37 yields incorrect results. We derive the corrected proposition and use numerical studies to show that a significant proportion of the evaluations performed by a Tabu Search for VRPTW falls under the two incorrect cases. Moreover, we demonstrate that the incorrect time window handling has a significant negative impact on the solution quality of the Tabu Search.     

UNICORE 6 — Recent and Future Advancements

UNICORE is a European Grid Technology with more than 10 years of history. Originating from the Supercomputing domain, the latest version UNICORE 6 has turned into a general-purpose Grid technology that follows established standards and offers a rich set of features to its users. The paper starts with an architectural insight into UNICORE 6, highlighting the workflow features, standards and the different clients. Next, the current state of advancement is presented by describing recent developments. The paper closes with an outlook on future planned developments.     

Autonomously Self‐Reporting Hard Coatings: Tracking the Temporal Oxidation Behavior of TiN by In Situ Sheet Resistance Measurements

Monitoring the structural health and integrity of coated components is of vital importance to increase their lifetime and the overall sustainability of the targeted applications. Here, the temporal oxidation behavior of TiN thin films is tracked using in situ sheet resistance measurements. Based on correlative film morphology, structure, and local composition data, it is evident that observed resistance changes are caused by oxidation of TiN. Thickness measurements of the remaining TiN under the oxide layer are in very good agreement with thicknesses deduced from in situ sheet resistance measurements. Hence, the in situ measured sheet resistance is an autonomous self‐reporting property useful for tracking the temporal oxidation behavior of TiN coatings.     

Optimized Characterization of Thermoelectric Generators for Automotive Application

New developments in the field of thermoelectric materials bring the prospect of consumer devices for recovery of some of the waste heat from internal combustion engines closer to reality. Efficiency improvements are expected due to the development of high-temperature thermoelectric generators (TEG). In contrast to already established radioisotope thermoelectric generators, the temperature difference in automotive systems is not constant, and this imposes a set of specific requirements on the TEG system components. In particular, the behavior of the TEGs and interface materials used to link the heat flow from the heat source through the TEG to the heat sink must be examined. Due to the usage patterns of automobiles, the TEG will be subject to cyclic thermal loads, which leads to module degradation. Additionally, the automotive TEG will be exposed to an inhomogeneous temperature distribution, leading to inhomogeneous mechanical loads and reduced system efficiency. Therefore, a characterization rig is required to allow determination of the electrical, thermal, and mechanical properties of such high-temperature TEG systems. This paper describes a measurement setup using controlled adjustment of cold-side and warm-side temperatures as well as controlled feed-in of electrical power for evaluation of TEGs for application in vehicles with combustion engines. The temperature profile in the setup can be varied to simulate any vehicle usage pattern, such as the European standard driving cycle, allowing the power yield of the TEGs to be evaluated for the chosen cycle. The spatially resolved temperature distribution of a TEG system can be examined by thermal imaging. Hotspots or cracks on thermocouples of the TEGs and the thermal resistance of thermal interface materials can also be examined using this technology. The construction of the setup is briefly explained, followed by detailed discussion of the experimental results.     

A Mapping Framework Based on Packing for Design Space Exploration of Heterogeneous MPSoCs

The computational demand of signal processing algorithms is rising continuously. Heterogeneous embedded multiprocessor systems-on-chips are one solution to satisfy this demand. But to be able to take advantage of these systems, new strategies are required to map applications to such a system and to evaluate the systems performance at a very early design stage. We will present a framework for static, analytical, bottom-up temporal and spatial mapping of applications to MPSoCs based on packing. This mapping framework allows easy performance evaluation and design space exploration of heterogeneous systems on chip.

Analysis and Test of Resistive-Open Defects in SRAM Pre-Charge Circuits

In this paper, we present an exhaustive study on the influence of resistive-open defects in pre-charge circuits of SRAM memories. In SRAM memories, the pre-charge circuits operate the pre-charge and equalization at a certain voltage level, in general Vdd, of all the couples of bit lines of the memory array. This action is essential in order to ensure correct read operations. We have analyzed the impact of resistive-opens placed in different locations of these circuits. Each defect studied in this paper disturbs the pre-charge circuit in a different way and for different resistive ranges, but the produced effect on the normal memory action is always the perturbation of the read operations. This faulty behavior can be modeled by Un-Restored Write Faults (URWFs) and Un-Restored Read Faults (URRFs), because there is an incorrect pre-charge/equalization of the bit lines after a write or read operation that disturbs the following read operation. In the last part of the paper, we demonstrate that the test of URWFs is more effective in terms of resistive defect detection than that of URRFs and we list the necessary test conditions to detect them.

Energy yield prediction errors and uncertainties of different photovoltaic models

Mathematical, empirical, and electrical models have long been implemented and used to predict the energy yield of many photovoltaic (PV) technologies. The purpose of this paper is to compare the annual DC energy yield prediction errors of four models namely the single‐point efficiency, single‐point efficiency with temperature correction, the Photovoltaic for Utility‐Scale Applications (PVUSA), and the one‐diode model, against outdoor measurements for different grid‐connected PV systems in Cyprus over a 4‐year evaluation period. The different models showed a wide variation of prediction errors, demonstrating a strong dependence between model performance and the different technologies. In particular, it was clearly shown that the application of temperature loss correction based on the manufacturer's temperature coefficients of power at maximum power point assisted in improving the energy yield prediction significantly especially for the crystalline silicon (c‐Si) technologies. In most cases, the best agreement between the modeled results and outdoor‐measured annual DC energy yield for mono‐crystalline silicon (mono‐c‐Si) and multi‐crystalline silicon (multi‐c‐Si) technologies was obtained using the one‐diode model. The energy yield for the thin‐film technologies was more accurately predicted using the PVUSA model with the exception of the copper‐indium‐gallium‐diselenide (CIGS) technology, which was best predicted using the single‐point efficiency with temperature correction and one‐diode models, thus demonstrating similar physical properties to c‐Si technologies. The paper further quantifies the combined uncertainties associated with the predicted energy yield as a function of the input parameters for the single‐point efficiency, single‐point efficiency with temperature correction, and the PVUSA models. Copyright © 2011 John Wiley & Sons, Ltd.     

The effect of multiple yeasts co-inoculations on Sauvignon Blanc wine aroma composition,sensory properties and consumer preference

Consumer acceptance testing has been only recently applied in wine research, to assess wine sensory attributes that affect hedonic liking. The aim of this study was to investigate the effect of Saccharomyces yeast co-inoculations on wine volatile composition and sensory profiles, and to determine if differences were sufficient enough to affect consumer acceptance. Fermentations were conducted using two- and three-yeast co-inoculations, and single strains. Yeast inocula differed substantially in volatile thiols and other flavour compounds, and in their sensory properties. Wines from four yeast inocula which showed large sensory differences were subjected to consumer testing by 120 consumers, with differences in overall liking found. Four clusters of consumers were identified, with one group strongly preferring the two-yeast co-inoculated wine with an intermediate sensory profile, while another group favoured the wine made using the three-yeast co-inoculation. This study has demonstrated that the yeast inoculum used to conduct fermentation affects consumer acceptance.     

Relevance of the acid–base approach in prediction of adhesion properties in two‐component injection moulding

We demonstrate the use of innovative wetting method in prediction of the adhesion properties of biobased polymers for two‐component injection moulding, taking into account the acid–base surface properties of joined materials. The measurements were carried out in accordance with modified Berger method by calculation of the difference in shortened acidity parameter ΔD_short between hard and soft component. Correlation factors up to 0.99 were observed between ΔD_short and peel force. In comparison to results obtained by conventional wetting methods, high potential for the selection of components with high interface adhesion and for prediction of the functionality by the acid–base approach was demonstrated. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43048.