An investigation of the amount of lead in blood of Tehran citizens in 1980–1981

A simple atomic absorption method for lead analysis is described; more than 830 samples of inhabitants on the basis to their age, sex, occupation and residential locations were collected for a period of one year (March 1980‐February 1981) and the results of analysis are given.     

Comparative study of adsorption properties of Turkish fly ashes. II. The case of chromium (VI) and cadmium (II)

The purpose of the study described in this paper was to compare the removal of Cr(VI) and Cd(II) from an aqueous solution using two different Turkish fly ashes; Afsin-Elbistan and Seyitomer as adsorbents. The influence of four parameters (contact time, solution pH, initial metal concentration in solution and ash quality) on the removal at 20+/-2 degrees C was studied. Fly ashes were found to have a higher adsorption capacity for the adsorption of Cd(II) as compared to Cr(VI) and both Cr(VI) and Cd(II) required an equilibrium time of 2h. The adsorption of Cr(VI) was higher at pH 4.0 for Afsin-Elbistan fly ash (25.46%) and pH 3.0 for Seyitomer fly ash (30.91%) while Cd(II) was adsorbed to a greater extent (98.43% for Afsin-Elbistan fly ash and 65.24% for Seyitomer fly ash) at pH 7.0. The adsorption of Cd(II) increased with an increase in the concentrations of these metals in solution while Cr(VI) adsorption decreased by both fly ashes. The lime (crystalline CaO) content in fly ash seemed to be a significant factor in influencing Cr(VI) and Cd(II) ions removal. The linear forms of the Langmuir and Freundlich equations were utilised for experiments with metal concentrations of 55+/-2mg/l for Cr(VI) and 6+/-0.2mg/l for Cd(II) as functions of solution pH (3.0-8.0). The adsorption of Cr(VI) on both fly ashes was not described by both the Langmuir and Freundlich isotherms while Cd(II) adsorption on both fly ashes satisfied only the Langmuir isotherm model. The adsorption capacities of both fly ashes were nearly three times less than that of activated carbon for the removal of Cr(VI) while Afsin-Elbistan fly ash with high-calcium content was as effective as activated carbon for the removal of Cd(II). Therefore, there are possibilities for use the adsorption of Cd(II) ions onto fly ash with high-calcium content in practical applications in Turkey.     

Performance Evaluation of ANN and ANFIS Models for Estimating Garlic Crop Evapotranspiration

Estimation of evapotranspiration (ET) is necessary in water resources management, farm irrigation scheduling, and environmental assessment. Hence, in practical hydrology, it is often necessary to reliably and consistently estimate evapotranspiration. In this study, two artificial intelligence (AI) techniques, including artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS), were used to compute garlic crop water requirements. Various architectures and input combinations of the models were compared for modeling garlic crop evapotranspiration. A case study in a semiarid region located in Hamedan Province in Iran was conducted with lysimeter measurements and weather daily data, including maximum temperature, minimum temperature, maximum relative humidity, minimum relative humidity, wind speed, and solar radiation during 2008–2009. Both ANN and ANFIS models produced reasonable results. The ANN, with 6-6-1 architecture, presented a superior ability to estimate garlic crop evapotranspiration. The estimates of the ANN and ANFIS models were compared with the garlic crop evapotranspiration (ETc) values measured by lysimeter and those of the crop coefficient approach. Based on these comparisons, it can be concluded that the ANN and ANFIS techniques are suitable for simulation of ETc.     

The effect of dietary forage to concentrate ratio and forage type on milk fatty acid composition and milk fat globule size of lactating cows

We examined the effects of 2 grass silage-based diets differing in forage:concentrate (FC) ratio and those of a red clover silage-based diet on intake, milk production, ruminal fatty acid (FA) biohydrogenation, milk FA composition, and milk fat globule (MFG) size distribution. Ten multiparous Nordic Red cows received the following treatments: grass silage-based diets containing high (70:30, HG) or low (30:70, LG) FC ratio or a red clover silage-based diet with an FC ratio of 50:50 (RC) on a dry matter basis. Determinations of MFG were performed from fresh milk samples without addition of EDTA so the results of fat globules >1 µm in diameter are emphasized instead of the entire globule population. Lower FC ratio in grass silage-based diets increased milk production with no effect on daily fat yield, leading to 13% lower milk fat concentration. The effect of FC ratio on MFG size was moderate. It did not affect the volume-weighted diameter in grass silage-based diets, although LG lowered the volume-surface diameter of MFG in the size class >1 µm compared with HG. Compared with HG, feeding LG moderately decreased the biohydrogenation of 18:2n-6, leading to a higher level of polyunsaturated fatty acids in milk fat. Feeding RC lowered milk fat concentration and daily milk fat yield compared with grass silage-based diets. The volume-weighted diameter of MFG in the size class >1 µm was smaller in RC milk compared with grass silage-based diets. Feeding RC increased the flow of 18:3n-3 at the omasum by 2.4-fold and decreased the apparent ruminal 18:3n-3 biohydrogenation compared with grass silage-based diets despite similar intake of 18:3n-3. It also resulted in the lowest amount of saturated FA and the highest amounts of cis-9 18:1, 18:3n-3, and polyunsaturated FA in milk. In conclusion, LG decreased milk fat content and induced minor changes in MFG size distribution compared with HG, whereas RC lowered milk fat production, altered milk FA composition to nutritionally more beneficial direction, and led to smaller MFG compared with grass silage-based diets.     

Composite nonlinear feedback design for discrete-time switching systems with disturbances and input saturation

This paper addresses the problem of robust controller design for a class of discrete-time switching systems with input saturation. To this aim, the composite nonlinear feedback method is extended to design a robust controller with improved performances in terms of the response speed and overshoot in the presence of disturbances and input saturation. The proposed approach is theoretically analysed and its closed-loop stability is proved. Then, the performance of the proposed method is verified using numerical simulations.     

Surface Structure Formation in Direct Chill (DC) Casting of Al Alloys

The aim of this study is to increase the understanding of the surface zone formation during direct chill (DC) casting of aluminum billets produced by the air slip technology. The depth of the shell zone, with compositions deviating from the bulk, is of large importance for the subsequent extrusion productivity and quality of final products. The surface microstructures of 6060 and 6005 aluminum alloys in three different surface appearances—defect free, wavy surface, and spot defects—were studied. The surface microstructures and outer appearance, segregation depth, and phase formation were investigated for the mentioned cases. The results were discussed and explained based on the exudation of liquid metal through the mushy zone and the fact that the exudated liquid is contained within a surface oxide skin. Outward solidification in the surface layer was quantitatively analyzed, and the oxide skin movements explained meniscus line formation. Phases forming at different positions in the segregation zone were analyzed and coupled to a cellular solidification in the exudated layer.     

Contribution to emission reduction of CO2 by a fluidized-bed membrane dual-type reactor in methanol synthesis process

In this work, a fluidized-bed membrane dual-type reactor was evaluated for CO₂ removal in methanol synthesis process. The feed synthesis gas is preheated in the tubes of the gas-cooled reactor and flowing in a counter-current mode with reacting gas mixture in the shell side. Due to the hydrogen partial pressure driving force, hydrogen can penetrate from feed synthesis gas into the reaction side through the membrane. The outlet synthesis gas from this reactor is fed to tubes of the water-cooled packed-bed reactor and the chemical reaction is initiated by the catalyst. The methanol-containing gas leaving this reactor is directed into the shell of the gas-cooled reactor and the reactions are completed in this fluidized-bed side. A two-phase dynamic model in bubbling regime of fluidization was developed in the presence of long-term catalyst deactivation. This model is used to compare the removal of CO₂ in a FBMDMR with a conventional dual-type methanol synthesis reactor (CDMR) and a membrane dual-type methanol synthesis reactor (MDMR). The simulation results show a considerable enhancement in the CO₂ conversion due to have a favourable profile of temperature and activity along the fluidized-bed membrane dual-type reactor relative to membrane and conventional dual-type reactor systems.     

Evaluation of the effects of Canadian climate conditions on the MEPDG predictions for flexible pavement performance

This study aims to investigate the quality of the recently developed Canadian climatic database and the effect of climatic factors on flexible pavement performance using the mechanistic-empirical pavement design guide (MEPDG). Two hundred and six Canadian climatic files were used to carry out the analysis. Freezing index and frost depth from the MEPDG were compared with the data available in Canadian databases. The sensitivity of pavement performance to climate conditions, predicted using the MEPDG, was also studied. The pavement performance predicted using the virtual weather station and existing weather station data was compared. From the pavement performance sensitivity study, it was found that the asphalt concrete, total pavement rutting and international roughness index show sensitivity to climate changes. It was also found that differences in the quality and duration of data for close-by stations can result in variation in the predicted performance. Overall, the study assists with facilitating the implementation of the MEPDG in Canada.     

Mechanical and thermal stresses in a functionally graded rotating disk with variable thickness due to radially symmetry loads

Rotating disks have many applications in the aerospace industry such as gas turbines and gears. These disks normally work under thermo mechanical loads. Minimizing the weight of such components can help reduce the overall payload in aerospace industry. For this purpose, a rotating functionally graded (FG) disk with variable thickness under a steady temperature field is considered in this paper. Thermo elastic solutions and the weight of the disk are related to the material grading index and the geometry of the disk. It is found that a disk with parabolic or hyperbolic convergent thickness profile has smaller stresses and displacements compared to a uniform thickness disk. Maximum radial stress due to centrifugal load in the solid disk with parabolic thickness profile may not be at the center unlike uniform thickness disk. Functionally graded disk with variable thickness has smaller stresses due to thermal load compared to those with uniform thickness. It is seen that for a given value of grading index, the FG disk having concave thickness profile is the lightest in weight whereas the FG disk with uniform thickness profile is the heaviest. Also for any given thickness profile, the weight of the FG disk lies in between the weights of the all-metal and the all-ceramic disks.     

Residual carbon dioxide as an index of feed efficiency in lactating dairy cows

High feed costs make feed conversion efficiency a desirable target for genetic improvement. Residual feed intake (RFI), calculated as the difference between observed and predicted intake, is a commonly used estimate of feed efficiency. However, determination of feed efficiency in dairy herds is challenging due to difficulties in measuring feed intake of individual animals reliably. Using residual CO₂ (RCO₂) production as an estimate of feed efficiency would allow ranking the cows according to feed efficiency, provided that CO₂ production is closely related to heat production and feed intake. The objective of this study was to evaluate the potential of RCO₂ as an index of feed efficiency using data from respiration calorimetry studies (289 cow per period observations). Heat production was precisely predicted from CO₂ production [root mean square error (RMSE)] adjusted for random effects was 1.5% of observed mean]. Dry matter intake (DMI) was better predicted from energy-corrected milk (ECM) yield and CO₂ production than from ECM yield and body weight in the model (adjusted RSME = 0.92 vs. 1.39 kg/d). Residual CO₂ production estimated as the difference between actual CO₂ production and that predicted from ECM yield, metabolic body weight was closely related to RFI (adjusted RMSE = 0.42) that was calculated as the difference between actual DMI and that predicted from ECM, metabolic body weight, and energy balance (EB). When the cows were categorized in 3 groups of equal sizes on the basis of RCO₂ (low, medium, and high), low RCO₂ cows had lower DMI, RFI, methane production and intensity (g/kg ECM), and heat production, but higher efficiency of metabolizable energy utilization for lactation than high RCO₂ cows. When RFI was predicted from RCO₂, the residuals (observed – predicted) were negatively related to EB and digestibility. Predicting RFI with a 2-variable model based on RCO₂ and digestibility, adjusted RMSE decreased to 0.23 kg/d, and residuals were not significantly related to EB. The cows in low RCO₂ group had a higher energy digestibility than the cows in the high RCO₂ group, and differences in EB were observed between the groups. Error of the model predicting residual ECM production from RCO₂ was 1.41 kg/d. The residuals were positively related to ECM yield and energy digestibility. Predicting residual ECM from RCO₂ and ECM yield decreased adjusted RMSE to 1.07 kg/d, and further to 0.78 kg/d when digestibility was included in the 2-variable model. It is concluded that RCO₂ has a potential for ranking individual cows based on feed efficiency.