Determining suitable dimensions for dairy goat feeding places by evaluating body posture and feeding reach

Confined goats spend a substantial part of the day feeding. A poorly designed feeding place increases the risk of feeding in nonphysiological body postures, and even injury. Scientifically validated information on suitable dimensions of feeding places for loose-housed goats is almost absent from the literature. The aim of the present study was, therefore, to determine feeding place dimensions that would allow goats to feed in a species-appropriate, relaxed body posture. A total of 27 goats with a height at the withers of 62 to 80 cm were included in the study. Goats were tested individually in an experimental feeding stall that allowed the height difference between the feed table, the standing area of the forelegs, and a feeding area step (difference in height between forelegs and hind legs) to be varied. The goats accessed the feed table via a palisade feeding barrier. The feed table was equipped with recesses at varying distances to the feeding barrier (5–55 cm in 5-cm steps) at angles of 30°, 60°, 90°, 120°, or 150° (feeding angle), which were filled with the goats' preferred food. In 18 trials, balanced for order across animals, each animal underwent all possible combinations of feeding area step (3 levels: 0, 10, and 20 cm) and of difference in height between feed table and standing area of forelegs (6 levels: 0, 5, 10, 15, 20, and 25 cm). The minimum and maximum reach at which the animals could reach feed on the table with a relaxed body posture was determined for each combination. Statistical analysis was performed using mixed-effects models. The animals were able to feed with a relaxed posture when the feed table was at least 10 cm higher than the standing height of the goats' forelegs. Larger goats achieved smaller minimum reaches and minimum reach increased if the goats' head and neck were angled. Maximum reach increased with increasing height at withers and height of the feed table. The presence of a feeding area step had no influence on minimum and maximum reach. Based on these results, the goats' feeding place can be designed to ensure that the animals are able to reach all of the feed in the manger or on the feed table with a relaxed posture, thus avoiding injuries and nonphysiological stress on joints and hooves. A feeding area step up to a maximum of 20 cm need not be taken into account in terms of feeding reach. However, the feed table must be raised at least 10 cm above the standing area to allow the goats to feed in a species-appropriate, relaxed posture.     

Nutritional behavior of cyclists during a 24-hour team relay race: a field study report

Background  

Information about behavior of energy intake in ultra-endurance cyclists during a 24-hour team relay race is scarce. The nutritional strategy during such an event is an important factor which athletes should plan carefully before the race. The purpose of this study was to examine and compare the nutritional intake of ultra-endurance cyclists during a 24-hour team relay race with the current nutritional guidelines for endurance events. Additionally, we analyzed the relationship among the nutritional and performance variables.     

Real-world emission factors of fine and ultrafine aerosol particles for different traffic situations in Switzerland

Extended field measurements of particle number (size distribution of particle diameters, D, in the range between 18 nm and 10 microm), surface area concentrations, and PM1 and PM10 mass concentrations were performed in Switzerland to determine traffic emissions using a comprehensive set of instruments. Measurements took place at roads with representative traffic regimes: at the kerbside of a motorway (120 km h(-1)), a highway (80-100 km h(-1)), and in an urban area with stop-and-go traffic (0-50 km h(-1)) regulated by light signals. Mean diurnal variations showed that the highest pollutant concentrations were during the morning rush hours, especially of the number density in the nanoparticle size range (D <50 nm). From the differences between up- and downwind concentrations (or differences between kerbside and background concentrations for the urban site), "real-life" emission factors were derived using NOx concentrations to calculate dilution factors. Particle number and volume emission factors of different size ranges (18-50 nm, 18-100 nm, and 18-300 nm) were derived for the total vehicle fleet and separated into a light-duty (LDV) and a heavy-duty vehicle (HDV) contribution. The total particle number emissions per vehicle were found to be about 11.7-13.5 x 10(14) particles km(-1) for constant speed (80-120 km h(-1) and 3.9 x 10(14) particles km(-1) for urban driving conditions. LDVs showed higher emission factors at constant high speed than under urban disturbed traffic flow. In contrast, HDVs emitted more air pollutants during deceleration and acceleration processes in stop-and-go traffic than with constant speed of about 80 km h(-1). On average, one HDV emits a 10-30 times higher amount of particulate air pollutants (in terms of both number and volume) than one LDV.     

E- and P-selectin: differences, similarities and implications for the design of P-selectin antagonists

Selectins form a family of Ca2+ -dependent carbohydrate binding proteins that mediate the initial step of leukocyte recruitment in the inflammatory process. Blocking of selectins is therefore considered a promising therapeutic approach to treat acute and chronic inflammatory diseases which are caused by excessive extravasation of leukocytes. This mini-review highlights the major structural differences between E- and P-selectin and summarizes the resulting strategies for the design of selectin antagonists.     

Poly(3-hexylthiophene)/C60 heterojunction solar cells: Implication of morphology on performance and ambipolar charge collection

The performance of heterojunction organic solar cells is critically dependent on the morphology of the donor and acceptor components in the active film. We report results of photovoltaic devices consisting of bilayers and bulk heterojunctions using poly(3-hexylthiophene) (P3HT) and Buckminsterfullerene C₆₀. White light power efficiencies of η2.2% (bulk heterojunction) and 2.6% (bilayer) were measured after a thermal annealing step on completed devices. Optical and structural investigations on non-annealed bilayer thin films indicated a distinct porosity of the spin-coated polymer, which allows C₆₀ to penetrate the P3HT layer and to touch the anode. This resulted for these bilayer solar cells in the experimental observation that electrons were collected predominantly at the cathode after photo-excitation of P3HT, but predominantly at the anode after C₆₀ excitation. A morphological model to explain the ambipolar charge collection phenomenon is proposed.     

Balancing nutrient inputs to Lake Kivu

The primary production in meromictic Lake Kivu is sustained by external nutrient inputs and by internal loading due to upwelling caused by sub-aquatic sources. We present here the results of external loading of phosphorus (P), nitrogen (N) and silica (Si) by rivers and atmospheric deposition measured from 2006 to 2008. These external inputs are compared to internal loading. The input of soluble-reactive P (SRP), supplied in equal parts from rivers and atmospheric deposition, adds up to 230 t P yr^− 1, 20 times less than total P load. Ammonium (mainly via rainwater) and nitrate (mainly via rivers) are primary sources of the dissolved N load (5400 t N yr^− 1), with both species contributing ∼ 50%. Dissolved Si input (40,000 t Si yr^− 1) is unique in that only ∼ 60% enters by rivers, while the remaining ∼ 40% comes from sub-aquatic sources and atmospheric deposition is negligible. Based on the molar nutrient ratios, we identify P as the limiting factor for algae production. Despite the strong anthropogenic impact on the catchment and the high particle erosion (74 t km^− 2 yr^− 1), the area-specific nutrient mobilization is rather low. The external nutrient input is therefore not the cause for the reported increase of methane production in the last decades. External loading to the epilimnion plays a lesser role for all three nutrients (∼ 10% for SRP, ∼ 25% for dissolved N and ∼ 45% for dissolved Si), as compared to the lake-internal loading by upwelling (90%, 75% and 55%, respectively). Lake Kivu, therefore, is similar to other East African large lakes in that the internal loading exceeds the external loading. Despite the substantial uncertainty of the load estimates of up to 50%, we can conclude that the observed nutrient input is consistent with the primary production of 260 g C m^− 2 yr^− 1 recently measured by Sarmento et al. (2006) and also consistent with the lake-internal fluxes established by Pasche et al. (in press).     

Triphenylamine – a ‘New’ Stabilizer for Nitrocellulose Based Propellants – Part I: Chemical Stability Studies

Triphenylamine (TPA) was used for the first time in France in 1937 as a stabilizer for propellants. The stability of those samples was described as ‘good’. Around 1950 an American group produced TPA stabilized propellants and investigated the decomposition mechanism. Apart from one single experiment in the 1970s no further attempts were made to take TPA as a stabilizer for propellants.     

Parameters Influencing the Pyrotechnic Reaction

Phenomena (reaction effects) such as varied light emissions, sound, varied burning rates, varied heats of reaction and reaction products occur during the reaction of inorganic redox systems used for pyrotechnics. The peculiarity of these redox reactions is, that they take place as solid‐solid, solid‐liquid or solid‐gaseous state reactions. In opposite the theoretical redox reaction normally postulated in inorganic chemistry takes place in a solvent. By variation of different parameters as for example the reducing agent, the oxidizer, the oxygen balance and the particle size, it is possible to create the above‐mentioned effects in a wide range.     

Nitrogen removal in a small constructed wetland: an isotope mass balance approach

The nitrogen (N) removal potential of constructed wetlands is increasingly used to lower the N load from agricultural nonpoint sources to inland and coastal waters. To determine the removal efficiency and key factors limiting wetland N removal, N fluxes were studied in a small constructed wetland in Central Switzerland. With an isotope mass balance approach integrating the natural isotope signature of nitrate (NO3-, ammonium (NH4+), and particulate nitrogen (PN), the N transformations such as assimilation, mineralization, nitrification, and denitrification were quantified. On average, the wetland removed 45 g m(-2) yr(-1) N during the studied 2.5 years, corresponding to a removal efficiency of 27%. Denitrification contributed 94% to the N removal, while only 6% of the removed N accumulated in the sediments. Denitrification was most efficient during periods with an oxic water column overlying anoxic sediments, as NH4+ released during mineralization of sediment organic matter was completely nitrified and subsequently denitrified at the sediment-water interface. During water column anoxia, NH4+ accumulated in the water and fueled assimilation by duckweed and internal recycling. The NO3-N isotope signature in the wetland mainly reflected the mineralization of sediment organic matter and subsequent nitrification, while denitrification at the sediment-water interface produced no fractionation.