Current oscillations in austenitic stainless steel induced by the presence of chloride ions

The conditions for current oscillations in austenitic stainless steel (AISI Type 303) in 1M H₂SO₄ containing Cl^? ions are given. The periodic oscillations are produced in a close potential range determined at the active-passive transition region. It requires a non-homogeneous distribution of inclusions and carbides at the metal surface and a concentration range of Cl^? ion where active and passive areas coexist on the metal surface. The constraints at the surface determining these two regions are related to the Cl^? ion competitive adsorption and the local accumulation of corrosion products. Electrochemical data and SEM observations are correlated.     

Initial stages of tin electrodeposition from sulfate baths in the presence of gluconate

Tin electrodeposition in its initial stages in acid sulfate/gluconate baths was studied with varying tin and gluconate concentrations using potential-controlled electrochemical techniques. The deposit morphology was observed by scanning electron microscopy (SEM). A comparison with tin electrodeposition from acid sulfate baths in the absence of gluconate was also carried out. Use of a highly acidic bath leads to nonuniform deposits, even in the presence of gluconate; at pH 4 deposits are uniform, brilliant and suitable for finishing applications. Tin crystallites have a well defined morphology which depends on bath agitation conditions. In the absence of agitation, the crystallites have the same tetragonal shape as in a sulfate bath without gluconate.     

Surface Areas of Nitrated Hydrotalcites

Hydrotalcites in the nitrate form were prepared using microwave irradiation in the hydrotreatment step. The surface area (BET) of nitrated hydrotalcites was evaluated. Solids were characterized by atomic absorption, X-ray diffraction and BET analysis. Thermal pretreatment temperature determined the surface area of the hydrotalcites.     

Use of mesoporous SBA-15 for nanostructuring titania for photocatalytic applications

SBA15–TiO₂ samples prepared by introducing titanium with a grafting method and having TiO₂ loadings below 15 wt.% have been characterized by XRF, XRD, IR, porosimetry, SEM, HRTEM, and UV–Visible diffuse reflectance. Differently from the samples reported in the literature characterized by a high TiO₂ loading, no evidences have been found for the presence of titania particles inside or outside the mesopores of SBA-15. Three different titanium species were instead evidenced to be present. The first two derive from the reaction of titanium with silanol groups in the corona area of inner SBA-15 walls leading to the formation of either TiO₄ tetrahedral sites (by reaction by hydroxyl nests of surface defect sites) and/or pseudo-octahedral surface sites anchored by two (or more) Si or Ti ions through bridging oxygens. The third species derives from the reaction of titanium in the regions with high sylanol density, e.g. in the micropores located in the corona of SBA-15 channels, leading to the formation of TiO₂-like nanoareas (probably Si-doped) with dimensions of around 1–2 nm maximum. The potential interest of these materials as photocatalysts, for the presence of a TiO₂-like nanoareas highly accessible by reactants, is discussed.     

Parameter Identification in Photothermal Imaging

We propose a technique to reconstruct the geometry of inclusions and their material parameters in thermal scattering near surfaces. The imaging problem is reformulated as a constrained optimization problem with a finite number of stationary constraints. The unknown domains and their parameters are the design variables. A descent method combining topological derivative analysis to find improved guesses of the objects and gradient iterations to correct their material parameters provides reasonable reconstructions.     

Effects of the nitrification inhibitor N-Serve on the utilization of fall-applied urea by wheat

Four-year microplot tests were performed to study the utilization by wheat, in the presence and absence of the nitrification inhibitor N-Serve, of¹⁵N labeled urea spread in fall. The percentages of fertilizer nitrogen taken up by winter wheat (grains and straw) were 18 to 37 percent when urea was spread in fall, 33 to 45 percent when urea plus N-Serve was applied in fall, and 36 to 49 percent when urea was spread in spring. In the 0–30 cm layer of soil there were found, for the treatments listed above, 15 to 23 percent, 24 to 45 percent, and 15 to 47 percent of urea nitrogen after the harvesting of winter wheat. Application of urea plus N-Serve in fall and of urea alone in spring resulted in similar amounts of fertilizer nitrogen being taken up by spring wheat to those taken up by winter wheat. Of the urea nitrogen applied in fall, 20 to 28 percent and 47 to 50 percent were not recovered from the plants and 0–30 cm soil layer with and without additional N-Serve treatment, respectively. The utilization by winter wheat of urea nitrogen spread, with no additional N-Serve, in fall from mid-October onward was considerably lower in those cases where, after fertilizing, weather conditions were such as to favour both nitrification and leaching. On heavy and loamy soil such influences of weather were offset by application of N-Serve.     

Polymerization of 2-phenyl-aziridine

Summary The ring-opening polymerization of 2-phenyl aziridine was studied with several catalyst systems: boron trifluoride etherate, chlorhydric acid, perchloric acid, dimethyl sulfate and methyl triflate. The corresponding polyamine was obtained as a pale yellow solid with a number average molecular weight around 2,000–3,000.A kinetic study is discussed in the case of perchloric acid and methyl triflate.     

Laser-generated liquid microjets: correlation between bubble dynamics and liquid ejection

Laser-based techniques provide excellent means for liquid microprinting, with several advantages over other more conventional printing techniques, such as being nozzle-free (as opposed to inkjet, for instance) or requiring minimal engineering of the liquid properties in the pre-printing stage. In such techniques, the transfer is usually mediated by liquid jets that contact a receiver substrate placed nearby the liquid source, leading to the deposition of a small droplet. The main cause of jetting lies in a laser-generated bubble produced inside the liquid, whose dynamics dictates the evolution of liquid ejection. However, the detailed relationship between the bubble and the jet is not completely understood, as the studies carried out so far have been mostly focused on the jetting dynamics taking place above the liquid free-surface, without access to the liquid interior and therefore to the behavior of the bubble. In this work, we analyze through time-resolved imaging the film-free laser printing of an aqueous solution by simultaneously visualizing both the bubble evolution and the liquid ejection dynamics, thus making possible the correlation between the two phenomena. We find that the pulsating behavior of the bubble leads to successive jetting events with different jet morphologies arising from the particular geometries that the bubble acquires during its evolution. Finally, we find good agreement between our results and those from studies analyzing the dynamics of cavitation bubbles near the free-surface of a liquid through numerical solution of the fluid dynamics equations.     

Effect of temperature on the separation of some Δ9-cis-trans isomers of methyl esters of fatty acids by open tubular gas chromatography

The influence of temperature on the gas chromatographic separation ofcis-trans isomers of the methyl esters of some monounsaturated fatty acids was studied on capillary columns coated with Apiezon L, BDS and DEGS. As far as methyl oleate and methyl elaidate are concerned, the separation is better at lower temperatures on Apiezon L (180–210 C) and at higher temperatures on polyester phases (BDS, DEGS; 150–180 C). The influence of temperature on the separation ofcis-trans isomers on the three stationary phases under study is explained by the higher values of δECL/δt forcis isomers. The variation of the equivalent carbon chain length with temperature can be used for the identification ofcis-trans isomers in natural mixtures.     

Redundancy filtering and fusion verification for video copy detection

Multimedia Systems - Recently, the frame fusion based video copy detection scheme provides a possibility to detect copies in a continuous query video stream. However, its computational complexity...