Photocatalytic degradation of Basic Red 46 and Basic Yellow 28 in single and binary mixture by UV/TiO2/periodate system

The present study deals with the investigation of photocatalytic degradation and mineralization of C.I. Basic Red 46 (BR46) and C.I. Basic Yellow 28 (BY28) dyes in single and binary solutions as a function of periodate ion concentration (IO(4)(-)), irradiation time, initial pH and initial dye concentrations. First order derivative spectrophotometric method was used for to simultaneous analysis of BY28 and BR46 in binary mixtures. Langmuir-Hinshelwood kinetic model was applied to experimental data and apparent reaction rate constant values were calculated. The apparent degradation rate constant values of BR46 were higher than those of BY28 for all experiments in single dye solutions. On the other hand, the significant reductions were observed for the apparent degradation rate constant values of the BR46 in the presence of BY28 in binary solutions whereas TOC removal efficiency slightly enhanced in binary system. The highest TOC removal efficiency was obtained at pH 3.0 by adding 5mM periodate ion in to the solution in the presence of 1g/L TiO(2) for both dye solutions. After 3h illumination, 68, 76 and 75% mineralization were found for 100mg/L BY28, 100mg/L BR46 and 50+50mg/L mixed solutions, respectively.     

Synthesis and Photodiode Characterization of Novel Twisted Carbazole Derivatives with 1,3,5-Benzene Core

In this study, considering the information given in the literature the Ullman and Suzuki-Miyaura coupling reactions were carried out using carbazole, 1,3,5 tribromo benzene and aryl boronic acid. The synthesized novel carbazole derivative (CPF4) were characterized by 1H NMR and 13C NMR. The photophysical and thermal properties of the synthesized novel carbazole derivatives CPF4 were investigated Graphene oxide (GO) doped CPF4/p-Si photodiodes were fabricated. The electrical properties of these photodiodes were characterized by current–voltage (I?V) and capacitance–voltage (C?V) measurements. The photocurrent properties of the diode were studied under various illumination intensities. The photoresponse properties of the diodes increased with GO content. The results indicate that CPF4:GO/p-Si heterojunctions can be used as a photodetector for optoelectronic applications.     

Economic analysis of standalone and grid connected hybrid energy systems

A pilot region was selected and cost analysis of using renewable energy sources with a hydrogen system for that region’s energy demand is introduced, in a techno-economic perspective, in this paper. The renewable energy potential for the region was evaluated by implementing energy cost analysis. The study also evaluates the feasibility of utilizing solar and wind energy with hydrogen as a storage unit to meet the electricity requirements of the pilot region as a standalone system and in conjunction with the conventional grid based electricity.In order to simulate the operation of the system and to calculate the technical and economic parameters, micropower optimization program Homer (NREL, US) was used in this study. Homer requires some input values, such as technological options, cost of components, and resource compliance; and then the program ranges the feasible system configurations according to the net present cost (system cost) by using these inputs.The pilot region in this study, where the renewable based energy will be used, is determined to be Electrics & Electronics Faculty, Istanbul Technical University.     

Comparative study of adsorption properties of Turkish fly ashes. I. The case of nickel(II), copper(II) and zinc(II)

The objective of this study was to compare two different Turkish fly ashes (Afsin-Elbistan and Seyitomer) for their ability to remove nickel [Ni(II)], copper [Cu(II)] and zinc [Zn(II)] from an aqueous solution. The effect of contact time, pH, initial metal concentration and fly ash origin on the adsorption process at 20+/-2 degrees C were studied. Batch kinetic studies showed that an equilibrium time of 2h was required for the adsorption of Ni(II), Cu(II) and Zn(II) on both the fly ashes. The maximum metal removal was found to be dependent on solution pH (7.0-8.0 for Ni(II), 5.0-6.0 for Cu(II) and 6.0-7.0 for Zn(II)) for each type of fly ash. With an increase in the concentrations of these metals, the adsorption of Ni(II) and Zn(II) increased while the Cu(II) adsorption decreased on both the fly ashes. Adsorption densities for the metal ions were Zn(II)>Cu(II)>Ni(II) for both the fly ashes. The effectiveness of fly ash as an adsorbent improved with increasing calcium (CaO) content. Adsorption data in the range of pH values (3.0-8.0) using Ni(II) and Cu(II) concentrations of 25+/-2mg/l and Zn(II) concentration of 30+/-2mg/l in solution were correlated using the linear forms of the Langmuir and Freundlich equations. The adsorption data were better fitted to the Langmuir isotherm since the correlation coefficients for the Langmuir isotherm were higher than that for the Freundlich isotherm. The fly ash with high calcium content (Afsin-Elbistan) was found to be a metal adsorbent as effective as activated carbon and, therefore, there are good prospects for the adsorptions of these metals on fly ash with high calcium content in practical applications in Turkey.     

Indirect electrochemical treatment of bisphenol A in water via electrochemically generated Fenton's reagent

Bisphenol A (BPA) has been treated with electrochemically generated Fenton's reagent in aqueous medium. Hydroxyl radicals that were formed in Fenton's reagent reacted with the organic substrate producing two different isomers of monohydroxylated product and, upon successive hydroxylation, mainly one dihydroxylated product. Further hydroxylation first degraded one of the aromatic rings, and the side chain thus formed was then cleaved off the other aromatic ring. The second aromatic ring was also degraded upon successive hydroxylations. Small saturated and unsaturated aliphatic acids were the last products prior to mineralization. It was found that use of cuprous/cupric ion pair resulted a faster conversion of BPA and faster mineralization when compared using ferrous/ferric ions, but this happened at the expence of excess electrical charge utilized for an equivalent conversion or mineralization. Degradation by using ferrous/ferric ions was more efficient than cuprous/cupric ions case in terms of total mineralization versus charge utilized, and a mineralization of 82% had been achieved by applying 107.8 mF of charge to a 0.7 mM BPA solution of 0.200 dm3. The rate constant of the monohydroxylation of BPA in the presence of ferrous/ferric ions had been determined as 1.0 x 10(10) M(-1) s(-1) where BPA and salicylic acid competitively reacted with hydroxyl radicals in aqueous medium with the initial concentrations of Fe2+, BPA, and SA of 1.0, 0.5, and 0.5 mM, respectively. In a similar experiment where the initial concentrations of Cu2+, BPA, and SA were 1.0, 0.5, and 0.5 mM, respectively, the corresponding rate constant was determined to be the same as the rate constant obtained for Fe2+ (i.e., 1.0 x 10(10) M(-1) s(-1)). While the use of Cu2+ cannot be advised for processing BPA and similar substrates by using the electro-Fenton technique for both technical and economical reasons, the use of [Fe2+]/[BPA]0 values in the range 3-4 will be sufficient to achieve an efficient mineralization of BPA and similar substrates by the electro-Fenton process in aqueous medium.     

A spectroscopic investigation for the adsorption of 4-nitrophenol onto synthetic zeolites

In this study, the characterization and environmental applications of faujasite type zeolites (NaX, NaY) are investigated using different instruments. Vibrational spectroscopy is used to a large extent in this research to characterize the zeolite materials and after the adsorption process. 4-nitrophenol was adsorbed on NaX and NaY zeolite and adsorption process was investigated by vibrational spectroscopy and scanning electron microscopy. Vibrational spectroscopic results showed that source of the adsorption is weak hydrogen bonding between zeolite surface silanol groups and OH group of 4-nitrophenol. This study was made to remove phenolic organics as possible substitutes for synthetic zeolites. SEM studies revealed the morphological observations of the unloaded zeolites and thereby changes in the adsorbed zeolites.     

Reduction of acrylamide formation in French fries by microwave pre‐cooking of potato strips

In this study, the effect of microwave pre‐cooking of potato strips on the resultant acrylamide levels in French fries was investigated. Control and microwaved (10, 20, and 30 s at 850 W) samples were fried at 150, 170 and 190 °C for predetermined times. Surface and core temperatures of potato strips were acquired during frying, and acrylamide content in the surface and the core regions were determined separately. The results showed that microwave application prior to frying resulted in a marked reduction of acrylamide level in the surface region, whereas a slight increase was noted for the core region. When the potato strips were subjected to frying after a microwave pre‐cooking step, acrylamide content in the whole potato strip was reduced by 36%, 41%, and 60% for frying at 150, 170, and 190 °C, respectively, in comparison to the control. Copyright © 2006 Society of Chemical Industry     

Irrigation Management in GAP

The multisectoral Southeastern Anatolia Project (GAP) is the largest regional developmentplan for one of the less developed parts of Turkey. The GAP project includes the irrigation of 1.7 million ha of land and generation of 27 billion kWh of hydroelectric power with an installed capacity of 7500 MW. In order to optimize the benefits to be obtained from irrigation and to ensure sustainable irrigation in the GAP area, the Government of Turkey has commissioned the GAP Management, and Operation Maintenance study (GAP MOM). The overall MOM model provides an institutional and organizational framework that promotes the most effective development of irrigated agriculture in the GAP region. This goal can be expressed as three major objectives: maximize net benefits, ensure sustainability and be implementable and flexible.     

Photocatalytic degradation of Congo Red by hydrothermally synthesized nanocrystalline TiO2 and identification of degradation products by LC-MS

Degradation of Congo Red (CR) dye in aqueous solutions was investigated by means of photocatalysis of TiO2 which was hydrothermally synthesized at 200 degrees C in 2 h, in anatase phase with 8 nm crystallite size. Efficiency of TiO2 in photocatalytic degradation under visible irradiation was studied by investigating the effects of amount of TiO2, irradiation time, initial CR concentration and pH. It was found that complete decolorization is achieved within 30 min of irradiation. Effects of nitrate and sulphate ions and humic acid on the degradation were also tested. The results were compared with Degussa P-25 TiO2 at the same degradation conditions. Degradation products were detected using LC-MS technique. The probable pathways for the formation of degradation products were proposed.     

Fuel cell and ultra-capacitor hybridization: A prototype test bench based analysis of different energy management strategies for vehicular applications

An energy storage system with sufficient power capacity should be incorporated with fuel cells (FCs) to compensate the slow dynamics of FCs. Ultra-capacitors (UCs) are potential candidates for a solution in this aspect. A test bench of such an FC/UC hybrid configuration that can emulate the dynamics of vehicular systems is presented in this paper. Namely, the test bench performance verification of wavelet transform and fuzzy logic based energy management strategy that was discussed in earlier simulation-based studies of the authors is investigated. Of equal importance is the comparison of the cascade wavelet-fuzzy logic based strategy with the case of using only fuzzy logic in the energy management is presented. Experimental results with small-scale devices, a PEMFC (5 kW, 48 V) manufactured by Plug Power^® Company, and a UC bank composed of 430 F, 16 V and 165 F, 48 V UC modules manufactured by Maxwell Technologies^® Company, illustrate the successful performance analysis of employed energy management schemes during similar motor cycles.