Comparison of Protein Extraction Solutions for Rice Starch Isolation and Effects of Residual Protein Content on Starch Pasting Properties

Protein extraction solutions such as aqueous solutions of sodium hydroxide (0.1 and 0.2 %), sodium lauryl sulfate (SLS, 1.2 %) containing sodium sulfite (0.12 %), and dodecylbenzene sulfonate (DoBS, 1.2 %) containing sodium sulfite (0.12 %) were compared in their protein removal efficiencies during isolation of starch from a rice flour (Ilpumbyo, a nonwaxy Korean rice variety). In addition, the pasting properties of the isolated starch was compared. More than 80 % of the flour protein was extracted in 1 h by stirring the dispersion (1:3, w/v) at room temperature. Repeating the extractions (1 or 2 h for each step) with fresh solution significantly increased the protein removal efficiency. When the extraction in 0.2 % NaOH was repeated four times (1 h for each step) at 25°C, the residual protein content in the isolated rice starch was 0.9 % (DB), equivalent to 86 % removal of the rice protein. Raising the extraction temperature slightly increased the protein solubility, but starch loss also became significant. Among the solutions, DoBS was most effective in removing rice protein whereas SLS was least. The residual protein content had a critical role in determining the pasting characteristics of the isolated starch, showing a negative correlation to the peak viscosity of the starch paste, but a positive correlation to the pasting temperature.     

Antioxidant effect of grapevine leaf extract on the oxidative stress induced by a high-fat diet in rats

This study was conducted to investigate the effect of grapevine leaf extract (GLE) on the oxidative stress of rats fed a high-fat diet. Rats were divided into six groups: a normal diet with 0% (NC), 1.0% (NG1.0), and 1.5% GLE (NG1.5); and a high-fat diet with 0% (HFC), 1.0% (HFG1.0), and 1.5% GLE (HFG1.5). Treatment with GLE to the high-fat diet reduced lipid peroxide concentrations in plasma and liver compared to those of HFC rats. Total glutathione and GSH/GSSG of the groups with GLE were higher than those of untreated groups. Hepatic glutathione peroxidase, glutathione-S-transferase, and glutathione reductase activities along with catalase and glutathione peroxidase activities in erythrocytes increased after GLE treatment to high-fat diet compared with HFC rats. Hepatic retinol and tocopherol increased in HFG1.5 group compared to those of HFC group. These results indicate that GLE can protect against oxidative stress induced by a high-fat diet in rats.     

Template‐Based Reconstruction of Surface Mesh Animation from Point Cloud Animation

In this paper, we present a method for reconstructing a surface mesh animation sequence from point cloud animation data. We mainly focus on the articulated body of a subject — the motion of which can be roughly described by its internal skeletal structure. The point cloud data is assumed to be captured independently without any inter‐frame correspondence information. Using a template model that resembles the given subject, our basic idea for reconstructing the mesh animation is to deform the template model to fit to the point cloud (on a frame‐by‐frame basis) while maintaining inter‐frame coherence. We first estimate the skeletal motion from the point cloud data. After applying the skeletal motion to the template surface, we refine it to fit to the point cloud data. We demonstrate the viability of the method by applying it to reconstruct a fast dancing motion     

A Multiscale-Porous Anion Exchange Membrane for Convenient and Scalable Electrokinetic Concentration of Cationic Species

A device able to electrokinetically concentrate cationic samples has many potential medical and industrial applications, but until now has remained undeveloped due to the lack of a commercial anion-permselective material leading to a prohibitively complex fabrication procedure. Herein, a novel multiscale-porous anion exchange membrane (MP-AEM) that enables the convenient and scalable electrokinetic concentration of cationic species is proposed. A mechanically enhanced multiscale-porous structure with a solid framework is realized by adopting polyester resin as an additive to overcome the intrinsic limitations of the AEM material. The scalable MP-AEM-embedded electrokinetic concentrator is devised based on the peculiar properties of the MP-AEM that for allow both ion and fluid transport. With the MP-AEM, the concentrator is fabricated in a highly streamlined manner consisting only of a simple insertion and assembly. The concentration performance of the MP-AEM-embedded electrokinetic concentrator is demonstrated with a positively charged fluorescent dye and a fluorescein-labeled protein, and the results show enrichment factors of 250 and 500, respectively. The MP-AEM makes cationic electrokinetic concentration more accessible and scalable, thereby enabling further progress in a wide range of fields.     

Lithiophilic MXene-Guided Lithium Metal Nucleation and Growth Behavior

The positive effects of a lithiophilic substrate on the electrochemical performance of lithium metal anodes are confirmed in several reports, while the understanding of lithiophilic substrate-guided lithium metal nucleation and growth behavior is still insufficient. In this study, the effect of a lithiophilic surface on lithium metal nucleation and growth behaviors is investigated using a large-area Ti₃C₂T_x MXene substrate with a large number of oxygen and fluorine dual heteroatoms. The use of the MXene substrate results in a high lithium-ion concentration as well as the formation of uniform solid–electrolyte-interface (SEI) layers on the lithiophilic surface. The solid–solid interface (MXene-SEI layer) significantly affects the surface tension of the deposited lithium metal nuclei as well as the nucleation overpotential, resulting in the formation of uniformly dispersed lithium nanoparticles ( ≈ 10–20 nm in diameter) over the entire MXene surface. The primary lithium nanoparticles preferentially coalesce and agglomerate into larger secondary particles while retaining their primary particle shapes. Subsequently, they form close-packed structures, resulting in a dense metal layer composed of particle-by-particle microstructures. This distinctive lithium metal deposition behavior leads to highly reversible cycling performance with high Columbic efficiencies >  99.0% and long cycle lives of over 1000 cycles.     

Effects of CEE and Feedback Error on Performance for AF-ORS with PSA-CE Schemes Over Quasi-Static Rayleigh Fading Channels

In this paper, we propose the analytical approach for amplify-and-forward (AF) opportunistic relaying schemes (ORS). When operation of AF-ORS consists of relay selection and data transmission phases based on pilot symbol assisted-channel estimation (PSA-CE) methods over quasi-static Rayleigh fading channels, we show that the relay selection phase can be implemented by pilots symbols transmission for source-relay and relay-destination. Moreover, the feedback method for the selected relay index is proposed to have a simple fashion. Then, we investigate the effects of both a channel estimation error and an estimated noise variance, which are obtained by PSA-CE methods, on the received signal-to-noise ratio (SNR). The average SNR loss is also derived in terms with the number of pilots in PSA-CE methods. Moreover, the average symbol error rate, the outage probability, and the normalized channel capacity of the ORS are derived in approximated closed-form expressions for an arbitrary link SNR when the channel state information in the source-relay-destination link is estimated based on transmitted pilots symbols. As the number of pilot symbols, the derived analytical approach is verified, and by comparing it with simulation results, the accuracy is demonstrated. In addition, it is verified that the effect of the feedback error can be neglected for PAS-CE methods over quasi-static fading channels.     

A Review of Three‐Dimensional Resistive Switching Cross‐Bar Array Memories from the Integration and Materials Property Points of View

Issues in the circuitry, integration, and material properties of the two‐dimensional (2D) and three‐dimensional (3D) crossbar array (CBA)‐type resistance switching memories are described. Two important quantitative guidelines for the memory integration are provided with respect to the required numbers of signal wires and sneak current paths. The advantage of 3D CBAs over 2D CBAs (i.e., the decrease in effect memory cell size) can be exploited only under certain limited conditions due to the increased area and layout complexity of the periphery circuits. The sneak current problem can be mitigated by the adoption of different voltage application schemes and various selection devices. These have critical correlations, however, and depend on the involved types of resistance switching memory. The problem is quantitatively dealt with using the generalized equation for the overall resistance of the parasitic current paths. Atomic layer deposition is discussed in detail as the most feasible fabrication process of 3D CBAs because it can provide the device with the necessary conformality and atomic‐level accuracy in thickness control. Other subsidiary issues related to the line resistance, maximum available current, and fabrication technologies are also reviewed. Finally, a summary and outlook on various other applications of 3D CBAs are provided.     

Analysis and characterization of traveling-wave electrode in electroabsorption modulator for radio-on-fiber application

Comparing with a lumped electroabsorption modulator (EAM), we show the merits of a long EAM with traveling-wave electrode with high radio-frequency (RF) gain that could be used in high-frequency analog application. By terminating the RF output port with the characteristic impedance of 30 /spl Omega/, the device exhibited a large enhancement of 6 dB above 10 GHz in the electrical-to-optical response and a wide fractional bandwidth as estimated from simulation. In addition, an input impedance matching circuit of stub embedded on the device chip was found to be very effective for improving RF characteristics in the narrow band of frequency.     

A new method to suppress harmonics using /spl lambda//4 bias line combined by defected ground structure in power amplifiers

A new /spl lambda//4 bias line combined by a dumb-bell shaped defected ground structure (DGS) is proposed to suppress harmonics in power amplifiers. The proposed DGS bias line maintains the required high impedance even after DGS is inserted, while the width and length of the /spl lambda//4 bias line are broader and shorter than those of conventional bias lines. When the DGS bias line is used in power amplifiers, the third harmonic components as well as the second harmonic are reduced, because of the increased slow-wave effect over wide harmonic band. It is shown that the reduction of the third harmonic component, the improvement of 1 dB compression point, and power added efficiency are 26.5 dB, 0.45 dB, and 9.1%, respectively.     

A 3.3-V single power supply 16-Mb nonvolatile virtual DRAM using aNAND flash memory technology

A 3.3-V 16-Mb nonvolatile memory having operation virtually identical to DRAM with package pin compatibility has been developed. Read and write operations are fully DRAM compatible except for a longer RAS precharge time after write. Fast random access time of 63 ns with the NAND flash memory cell is achieved by using a hierarchical row decoder scheme and a unique folded bit-line architecture which also allows bit-by-bit program verify and inhibit operation. Fast page mode with a column address access time of 21 ns is achieved by sensing and latching 4 k cells simultaneously. To allow byte alterability, nonvolatile restore operation with self-contained erase is developed. Self-contained erase is word-line based, and increased cell disturb due to the word-line based erase is relaxed by adding a boosted bit-line scheme to a conventional self-boosting technique. The device is fabricated in a 0.5-μm triple-well, p-substrate CMOS process using two-metal and three-poly interconnect layers. A resulting die size is 86.6 mm², and the effective cell size including the overhead of string select transistors is 2.0 μm²