Ru-based bimetallic alloys for hydrogen generation by hydrolysis of sodium tetrahydroborate

The present study contemplates the application of Ru-based bimetallic alloys for hydrogen generation by hydrolysis of sodium tetrahydroborate (NaBH₄). Ru and Pt, RuCu, RuPd, RuAg and RuPt (atomic ratio 1:1), PtAg, and Ru_xPt_y (atomic ratios x:y of 2:1 or 1:2), all supported over titanium oxide, were prepared. Their activity decreased in the order RuRu₂Pt₁ > RuPtRu₁Pt₂ > RuPd > RuAgPt > RuCu > PtAg. Alloying Ru with an inactive metal like Cu, Pd or Ag did not improve the performances of Ru. The catalytic ability of Ru₂Pt₁-TiO₂ is in the range of the highest values reported so far in the literature with a hydrogen generation rate of 15.2 L(H₂) min⁻¹ g⁻¹(RuPt). After separation from the reaction medium and rinsing with deionised water, the used Ru₂Pt₁-TiO₂ catalyst was re-evaluated and almost the same catalytic activities as fresh catalyst were obtained during several cycles.     

Fatty acids of the seeds of <Emphasis Type="Italic">Origanum onites</Emphasis> L. and <Emphasis Type="Italic">O. vulgare</Emphasis> L.

Seed oils of Origanum onites L. from the Antalya and Mugla regions and O. vulgare L. from the Kirklareli region of Turkey were extracted with hexane in a Soxhlet apparatus. The oil yields were 14.1–20.0 and 18.5%, respectively. FA compositions of the seed oils were determined by GC and GC/MS. Twenty FA were identified in both O. onites and O. vulgare seeds. The major FA of both species were linolenic (56.3–57.0%; 61.8%), linoleic (21.5–21.7%; 18.8%), oleic (8.7–8.9%; 5.9%), palmitic (5.9–6.5%; 5.5%), stearic (2.1–2.4%; 2.1%), and (Z)-11-octadecenoic (0.6–0.8%; 0.5%), respectively.     

Improved mechanical strength of p(AAm) interpenetrating hydrogel network due to microgranular cellulose embedding

Here, polyacrylamide [p(AAm)]‐based hydrogels were synthesized via redox polymerization technique in the presence of various amounts of microgranular cellulose (MGCell) such as 0, 10, 25, 50, 100, and 150 mg MGCell/g. The synthesized p(AAm)‐MGCell interpenetrating hydrogels were characterized spectroscopically by FTIR, thermally by TGA analysis, and mechanically via dynamic mechanical measurements. Furthermore, the effect of the amount of MGCell in p(AAm) hydrogels on swelling% (S%) degree and mechanical strength was investigated. It was found that the S% was decreased from 727 ± 9 to 667 ± 6, 642 ± 8 and 619 ± 10, 568 ± 6 for p(AAm)‐MGCell interpenetrating network hydrogels containing 10, 50, 100, and 150 mg MGCell, respectively. On the other hand, the Young modulus of p(AAm)‐based hydrogels increased from 2.8 ± 0.2 kPa to 3.1 ± 0.03, 3.4 ± 0.1, 3.6 ± 0.3 and 4.3 ± 0.3 kPa with the incorporation of 10, 50, 100, and 150 mg MGCell into p(AAm) hydrogels. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44854.     

Effect of Gamma Irradiation on Biochemical Properties of Grape Seeds

In the present study, grape seed samples (Alicante Bouschet, Cabernet Franc, Cinsault, Merlot, Shiraz) were treated with 1.0, 3.0, 5.0, and 7.0 kGy of gamma radiation. Effect of irradiation dose on free fatty acids (FFA), peroxide value (PV), sterol, fatty acid composition, phenolic content, antioxidant activity of the seed oils, and chemical (dry matter, fat, ash, total sugar, invert sugar) changes of grape seeds were determined. Regarding fatty acid composition, oleic acid (C18:1) and linoleic acid (C18:2) levels decreased. β-sitosterol content with a highest percentage among sterols in grape seed oils decreased due to gamma irradiation. Generally gamma irradiation increased free fatty acids and peroxide value of the oils; however, phenolic content and antioxidant capacity of grape seeds decreased.     

Superporous cryogel/conductive composite systems for potential sensor applications

In situ synthesis of conductive polymers, poly(Aniline) (p(An)), poly(Pyrrole) (p(Py)), and poly(Thiophene) (p(Th)) within network of superporous cryogels with tunable functionalities as neutral poly(acrylamide) (p(AAm), anionic poly(acrylic acid) (p(AAc)), and cationic poly(4-vinylpyridine) (p(4-VP)) were carried out via oxidation polymerization technique. The highest conductivity values were measured for p(AAm)/p(An) semi-IPN cryogel with 1.4 × 10^?2 S.cm^?1 and for p(AAc)/p(Py) cryogel with 3.2 × 10^?4 S.cm^?1. In addition, to increase the amounts of conductive polymers within cryogel networks, reloading/polymerization cycle was carried out thrice, and found that there is no significant increase in the amounts of conductive polymers and the measured conductivity values. The prepared p(AAm), p(AAc), and p(4-VP) cryogels and their corresponding p(An), p(Py), and p(Th) composites were tested potential sensor materials against HCl and NH₃ vapor. The changes on conductivities for bare p(4-VP) cryogel were observed as 70 and 52-fold increase upon HCl and NH₃ gas treatment, respectively. The p(4-VP)/p(An) p(An) composites showed 7-fold conductivity decrease upon the treatments of HCl and NH₃ vapors. The p(AAm)/p(Py) composite responded 2-fold increase upon HCl vapor exposure and 50-fold decrease upon NH₃ vapor exposure. Furthermore, p(AAm)/p(Th) cryogel composite responded 7-fold decrease and 300-fold increase in their conductivities upon HCl and NH₃ vapor exposure, respectively.

Open image in new window

Graphical abstract ?

     

Mixed-model assembly line balancing using a multi-objective ant colony optimization approach

Mixed-model assembly lines are production systems at which two or more models are assembled sequentially at the same line. For optimal productivity and efficiency, during the design of these lines, the work to be done at stations must be well balanced satisfying the constraints such as time, space and location. This paper deals with the mixed-model assembly line balancing problem (MALBP). The most common objective for this problem is to minimize the number of stations for a given cycle time. However, the problem of capacity utilization and the discrepancies among station times due to operation time variations are of design concerns together with the number of stations, the line efficiency and the smooth production. A multi-objective ant colony optimization (MOACO) algorithm is proposed here to solve this problem. To prove the efficiency of the proposed algorithm, a number of test problems are solved. The results show that the MOACO algorithm is an efficient and effective algorithm which gives better results than other methods compared.     

Meso-scale deformation and damage in thermally bonded nonwovens

Thermal bonding is the fastest and the cheapest technique for manufacturing nonwovens. Understanding mechanical behaviour of these materials, especially related to damage, can aid in design of products containing nonwoven parts. A finite element (FE) model incorporating mechanical properties related to damage such as maximum stress and strain at failure of fabric’s fibres would be a powerful design and optimisation tool. In this study, polypropylene-based thermally bonded nonwovens manufactured at optimal processing conditions were used as a model system. A damage behaviour of the nonwoven fabric is governed by its single-fibre properties, which are obtained by conducting tensile tests over a wide range of strain rates. The fibres for the tests were extracted from the nonwoven fabric in a way that a single bond point was attached at both ends of each fibre. Additionally, similar tests were performed on unprocessed fibres, which form the nonwoven. Those experiments not only provided insight into damage mechanisms of fibres in thermally bonded nonwovens but also demonstrated a significant drop in magnitudes of failure stress and respective strain in fibres due to the bonding process. A novel technique was introduced in this study to develop damage criteria based on the deformation and fracture behaviour of a single fibre in a thermally bonded nonwoven fabric. The damage behaviour of a fibrous network within the thermally bonded fabric was simulated with a FE model consisting of a number of fibres attached to two neighbouring bond points. Additionally, various arrangements of fibres’ orientation and material properties were implemented in the model to analyse the respective effects.     

Preparation of polyacrylamide hydrogels at various charge densities by postmodification

In this study, first polyacrylamide hydrogels were synthesized by free‐radical crosslinking polymerization of acrylamide monomer with N,N′‐methylenebis(acrylamide) as a crosslinker in an aqueous solution at 22°C. Then, a series of hydrogels at various charge densities were prepared by partial hydrolysis of polyacrylamide precursors in a 0.1M sodium hydroxide solution at 60°C. The hydrolysis time was varied between 20 and 180 min. The chemical structures and internal morphologies of the hydrogels before and after alkaline hydrolysis were characterized with attenuated total reflectance/Fourier transform infrared and scanning electron microscopy measurements. The swelling ratio of the hydrolyzed hydrogels was measured in buffer solutions at various pHs. From differential curves of dQ_v/dpH versus pH (where Q_v is the equilibrium swelling ratio of the hydrogels), the volume phase transition pH of the hydrogels was found to be 4.33 ± 0.05, regardless of the charge density of the hydrogels. In water at 22°C, the hydrogels with greater charge density showed a more rapid swelling rate because of their higher porosity and hydrophilicity. Moreover, in buffer solutions with the pH changing from 9.0 to 2.0 at 22°C, the hydrogels with greater charge density also exhibited a more rapid deswelling rate than the hydrogels with less charge density. In conclusion, the postmodification method is a good way of preparing pH‐sensitive hydrogels with fast responsiveness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Theoretical means for searching bimetallic alloys as anode electrocatalysts for direct liquid-feed fuel cells

The present paper reviews the best anode electrocatalysts, mainly the alloys, which have been tested in direct liquid-feed fuel cells fed with methanol, ethanol or formic acid. It attempts to interpret the alloys catalytic behaviours by using the Nørskov and co-workers’ theoretical work [A. Ruban, B. Hammer, P. Stoltze, H.L. Skriver, J.K. Nørskov, J. Mol. Catal. A 115 (1997) 421; B. Hammer, J.K. Nørskov, Adv. Catal. 45 (2000) 71; J. Greeley, J.K. Nørskov, M. Maurikakis, Annu. Rev. Phys. Chem. 53 (2002) 319], who proposed surface theories and databases about the metals d-band centre shift and the segregation. It also attempts to suggest new alloys combinations. For example, for the methanol oxidation, the best catalyst is Pt-Ru and the following features make this catalyst stand out: the d-band centre of Pt shifts down what supposes weaker molecules adsorption and Pt strongly segregates. From this analysis, it is suggested that the Pd-Ni alloy may be a potentially good catalyst. Similar interpretations are given for the three fuel cell systems regarded in the present paper.     

Fatty Acid Composition of the Oil from Developing Seeds of Different Varieties of Safflower (Carthamus tinctorius L.)

Fatty acid composition and moisture and oil content were determined for Montola-2001 and Centennial safflower varieties at three different harvest dates from flowering to maturity, which were grown as autumn and spring crops in two different locations in 2001–2002 and 2002–2003. The experiment was carried out using split–split plots in a randomized complete block design with three replicates. Sowing dates affected oil content and fatty acid compositions significantly (P < 0.01), whereas moisture content in both years was not significantly affected. Moisture content declined 15 days from flowering period to maturity, while oil content increased. The rate of the palmitic acid formation decreased in both varieties 15 days from flowering period to maturity, whereas formation rates of the oleic and linoleic acids increased in Montola-2001 and Centennial varieties, respectively.