A technique for controlling the placement of the thin area in electrojetpolished tem foils of tungsten

Recently we have been making extensive use of TEM observations of grain boundaries in a research program concerned with the deformation behavior of tungsten bicrystals. A major problem in this research involved the preparation of thin foils which contained the grain boundary in the electron tranparent region, since standard cell type electrojetpolishing techniques do not allow adequate control of the placement of the thin area. Since the grain boundary comprises a very small percentage of a foil, good thin area placement control is critical to obtaining useful samples consistently. Masking techniques which use electrically insulating lacquers are not precise enough to guarantee the position of the thin area. However, we have found that one can use the dishing characteristic of the jetpolisher (i.e., the fact that the center of the foil thins faster than the perimeter) in conjunction with the masking technique to predict the position of the thin area within a preferentially thinned region created by the masking procedure outlined below. This is the essence of the procedure outlined below.     

Diel Vertical Migration of Round Goby Larvae in the Great Lakes

One hypothesis for the transcontinental and intra-Great Lakes basin transfer of round gobies (Neogobius melanostomus) has been that round gobies were pumped into the ballast water of ships. During June 2005 in Lake Erie, we obtained evidence of a vertical migration of round goby larvae, when we collected 167 round goby larvae in surface ichthyoplankton net tows at night and zero during day. These results complemented similar findings from the Muskegon River estuary of Lake Michigan during 2003 and 2004, documenting diel vertical migration for the first time in larval round gobies. We suggest vertical migration behavior may have allowed larval round gobies to be transported to and within the Great Lakes via ballast water and dispersed in the Great Lakes via advection of 6.5–8.5-mm long larvae at the surface. Based on our results, if ballast water was only taken on near the surface during daylight hours from May through September when larval round gobies were present, it would have mitigated the spread of round gobies throughout the Great Lakes.     

Performance of a non‐load‐bearing steel stud gypsum board wall assembly: Experiments and modelling

A gypsum wall assembly was exposed to an intense real‐scale compartment fire. For the wall assembly, temperatures were measured at the exposed face, within the stud cavity, and at the unexposed face during the fire exposure. Total heat flux gauges were used to measure the temporal variation of the energy incident on the walls, and cameras, both visual and infrared, were used to image the unexposed face of the wall assembly during the fire exposure. The behaviour of the wall assembly under the fire load is discussed as are current model results for a simulation of the fire test. Copyright © 2006 John Wiley & Sons, Ltd.     

Analysis of the Survivability of GaN Low-Noise Amplifiers

This paper presents a detailed analysis of the stressing mechanisms for highly rugged low-noise GaN monolithic-microwave integrated-circuit amplifiers operated at extremely high input powers. As an example, a low-noise amplifier (LNA) operating in the 3-7-GHz frequency band is used. A noise figure (NF) below 2.3 dB is measured from 3.5 to 7 GHz with NF<1.8 dB between 5-7 GHz. This device survived 33 dBm of available RF input power for 16 h without any change in low-noise performance. The stress mechanisms at high input powers are identified by systematic measurements of an LNA and a single high electron-mobility transistor in the frequency and time domains. It is shown that the gate dc current, which occurs due to self-biasing, is the most critical factor regarding survivability. A series resistance in the gate dc feed can reduce this gate current by feedback, and may be used to improve LNA ruggedness     

Calcium and phosphorus levels as indices of textured milk proteins being substituted for meat proteins

Textured milk proteins were tested in a meat model system with an exchange level of 34-87% of the meat proteins. The correlation between the substitution index and the calcium and phosphorus content was statistically significant.     

Effects of feeding whole cottonseed to lactating dairy cows on glucose and palmitate metabolism

Eight lactating Holstein dairy cows were fed corn silage-based diets with or without whole cottonseed at 18.5% of the dietary dry matter. At 42 days postpartum, a pulse injection of 100 mg glucose/kg body weight was given intravenously and plasma glucose concentration was monitored for 45 min. At 50 d postpartum, biopsies of adipose tissue and mammary tissue were taken and tissue slices were incubated in vitro with either uniform carbon-14 glucose or 1-carbon-14 palmitate. Basal concentration of plasma glucose was not affected by diet, although apparent distribution volume of glucose did seem to decrease due to feeding whole cottonseed. Feeding whole cottonseed decreased uptake of glucose and palmitate in both adipose tissue and mammary tissue and also decreased oxidation of glucose to carbon dioxide in both tissues. Palmitate oxidation was not affected by diet. Incorporation of carbon-14 from glucose into adipose tissue lipids was decreased in cows fed whole cottonseed. Results indicate that fat supplementation in the form of whole cottonseed may decrease palmitate incorporation and glucose utilization for glycerol and reducing equivalent synthesis in both adipose tissue and mammary tissue of lactating dairy cows.     

Comparative studies on the enzymatic absorption of protein hydrolysates in the small intestine of the rat. 3. The absorption trypsins thermatatic and trypsin-thermatatic hydrolysates of a fava bean protein isolate compared to an equimolar mixture of free amino acids

Tryptic, thermitatic, and tryptic-thermitatic Faba bean protein hydrolyzates as well as their equimolar mixture of amino acids were perfused through proximal and distal parts of the intestine (10 cm length) of non-narcotized rats. The total amino-acid concentration of the perfused solution was 50 mM. The absorption of nitrogen and total amino acids from the tryptic and tryptic-thermitatic hydrolyzates was lower than that from the amino-acid mixture, the absorption from the thermitatic hydrolyzate was in accordance with that from the amino-acid mixture. The absorption pattern of the amino acids which preferably undergo a peptidic absorption is similar with the three hydrolyzates: in the proximal intestinal part this concerns glutamic acid and serine, in the distal intestinal part--methionine, alanine, glycin, and serine. The absorption pattern of the amino acids is different between the three hydrolyzates and the amino-acid mixture. Between the absorption pattern of the amino acids from the three hydrolyzates little differences were evident only in the proximal intestinal part. The coefficients of variation of the tryptic-thermitatic hydrolyzates are in accordance with those of the amino-acid mixture, whereas that of the thermitatic hydrolyzates is significantly lower. In the distal intestinal part all supplied forms are more rapidly absorbed than in the proximal part of the intestine.     

Microprocessor testability

As the level of microprocessor complexity increases to several hundred thousand transistors for a single-chip machine, it is becoming very difficult to test commercially available designs to the level of fault coverage desired by some customers. In order to achieve near 100-percent coverage of single stuck-at faults, future microprocessors must be designed with special testing features (designed for testability). The authors describe the testing problem for microprocessors, including the various methods of generating test sets and their application by the user. A survey of the testability features of some of today's commercially available microprocessors is presented. Suggestions for testability features for future-generation microprocessors are also discussed