Generating topological structures for surface models

Rapid prototyping has imposed new requirements on the processing of CAD models. To manufacture an object directly, the model must correspond to a real object and thus represent a closed volume. Its boundary must be continuous and closed, and no cracks or improper intersections are allowed. CAD models cannot always meet these requirements, especially when they are constructed by a surface modeler. The algorithm discussed analyzes surface models and generates a topological structure for them that meets rapid prototyping requirements for a closed volume with a continuous, closed boundary     

Grassmannian, central projection, and output feedback poleassignment of linear systems

A sufficient rank condition for arbitrary pole assignability by static output feedback of m-input, p-output linear systems of McMillan degree n相似文献   

Invasiveness of LiTaO/sub 3/ and GaAs probes in external E-O sampling

Disturbances of signals on a coplanar waveguide (CPW) induced by the presence of LiTaO/sub 3/ and GaAs electrooptic probes in external electrooptic (EO) sampling have been simulated and compared quantitatively. The finite-difference-time-domain method is used to simulate the full wave field around a coplanar waveguide on a GaAs substrate in an external EO sampling configuration. The results indicate that the induced signal disturbance, or invasiveness, of a LiTaO/sub 3/ probe is almost ten times that of a GaAs probe in terms of the magnitude of S/sub 11/, but that LiTaO/sub 3/ yields about two times the EO response for a given S/sub 11/ and optical probing wavelength. The transparency of LiTaO/sub 3/ to shorter wavelengths, however, allows an even higher sensitivity for this material relative to GaAs. The results suggest that these probes do not exhibit significant invasiveness (magnitude of S/sub 11/ smaller than -40 dB), if they are removed from contact by the distance of CPWs center conductor width.<>     

Effect of silver addition on superconductivity in the Bi1.6Pb0.4Sr1.6Ca2Cu3O10−y system

Silver/superconductor composites containing 0 to 80 vol% silver have been prepared and their properties determined. Optimum heat treatment at sintering temperatures ( 800° C) under low oxygen pressures produces material with high critical current density and improves physical properties. Magnetic susceptibility measurements have been found to be consistent with resistivity results. In order to retain a single high-T _c phase with increasing silver content, decreased oxygen partial pressures are required. Using the normal-state resistivity of these composites, a percolation threshold at a silver volume fraction of 43% was observed, while zero resistivity measurements show that a continuous superconducting network can be obtained with up to 80 vol% silver. The critical current density of 21 vol% silver-doped samples was found to be 1520 A cm^–2 at 77.3 K, compared to 260 A cm^–2 for an undoped sample.     

Scaling effects on flow hydrodynamics of confined microdroplets induced by Rayleigh surface acoustic wave

This paper reports an experimental and numerical investigation on the scaling effects in the flow hydrodynamics for confined microdroplets induced by a surface acoustic wave (SAW). The characteristic parameters of the flow hydrodynamics were studied as a function of the separation height, H, between the LiNbO₃ substrate and a top glass plate, for various droplets volumes and radio-frequency powers. The ratio of the gap height to attenuation length of the SAW, H/l _SAW, is shown to be an important parameter affecting the streaming flow induced in this confined regime. The reported numerical and experimental results are in good agreement over the range examined in this study and demonstrate that, at a lower gap heights of H?≤?100?μm, a significant decrease in streaming velocity or Reynolds number is induced, with the velocity approaching zero when the gap height is decreased to ~50?μm. An increase in the gap height results in an increased streaming velocity; however, if the gap height exceeds 70?% of the SAW attenuation length, any further increase in the gap height induces a drop in the streaming velocity.     

Translational motion compensation for coronary angiogram sequences

A method of compensating for the lag of the video cameras typically used in angiographic systems is presented for use in sequences of digitized X-ray images. The lag effect is reduced by a straightforward weighted subtraction, which has the undesirable side effect of increasing noise. By superimposing several lag-corrected and appropriately shifted images, however, the signal-to-noise ratio can be restored. The algorithm uses the phase-correlation method to measure the two-dimensional shift of a mobile coronary arterial structure. Processing is confined to a rectangular area of interest (AOI), which encloses a feature of clinical significance. The differences of the phases of the Fourier transforms of two frames is computed, combined with an appropriate filter, and inverse Fourier-transformed to produce a phase-correlation image. The vector separation from the origin of image space of the peak of the phase-correlation image is the estimate of the shift of the artery's position in the second frame as compared to the first. The isolation of the AOI from the surrounding image is achieved by the application of a window and correction for any linear trend in the background intensity.     

Laser glazing of an Fe-C-Sn alloy

Morphology and geometry of melted zones, cooling rates, microstructure and microhardness in the laser-glazed Fe-4%C-10%Sn alloy have been investigated. The computer simulation on the basis of the moving gaussian source model was used successfully to predict the maximum width and depth of the melted zone and the cooling rate. The microstructure from the surface to the bottom of the laser-melted zone is a non-crystalline phase, dendritic grains and a microcrystalline zone successively. Values of the averaged-spacing of the non-crystalline phase are 0.205⁶ and 0.121⁹nm, respectively; twinned martensites, having an axial ratioc/a of 1.128, existed in dendritic grains, and carbides of Fe₃ C at the interdendritic regions; the microcrystalline zone was composed of -Fe and a new bet (a=0.415 nm,c=0.955 nm) phase. The different microstructure in the melted zone can be explained by the results of the heat flow calculation. A fine eutectic structure (-Fe + Fe₃C) was observed in heat-affected zones. Microhardness of the eutectic structure can be predicted by the empirical relation of fracture stress to the interlamellar spacing of pearlite.     

一种制做三维牙——颌骨光弹性模型的新方法

本文提出一种用“整体浇注法”制做三维牙——颌骨光弹性模型的新方法,即用价格便宜的石膏做阴模,先制出与真实牙几何相似的牙光弹性模型和模拟牙周膜的乳胶套,将它们粘接好,然后将其放入颌骨石膏阴模的适当位置,浇入环氧树脂混合液,用“二次固化法”进行固化,即可制成三维牙——颌骨整体光弹性模型。此法能保证模型与实物的严格几何相似和牙周的边界条件相似,使实验精度大大提高且工艺简单、成本低。     

Parallel Algorithms for Image Template Matching on Hypercube SIMD Computers

This correspondence presents several parallel algorithms for image template matching on an SIMD array processor with a hypercube interconnection network. For an N by N image and an M by M window, the time complexity is reduced from O(N2M2) for the serial algorithm to O(M2/K2 + M * log2 N/K + log2 N * log2 K) for the N2K2-PE system (1 ? K ? M), or to O(N2M2/L2) for the L2-PE system (L ? N). With efficient use of the inter-PE communication network, each PE requires only a small local memory, many unnecessary data transmissions are eliminated, and the time complexity is greatly reduced.     

Modulation on the electrical and optical properties of Na and Rh co-doped Ruddlesden-Popper layered Ca3Ti2O7

Layered perovskite Ca_2.91Na_0.09Ti_2-xRh_xO₇ (x?=?0.00, 0.02, 0.04, 0.06) were synthesized by a conventional solid-state reaction. Room temperature ferroelectricity has been confirmed. The remanent polarization increases with an increase of Rh content, which is due to a larger oxygen octahedral distortion by Rh doping. The coercive field increases with Rh doping as the pinning effect of oxygen vacancies reduce the mobility of domain wall. Remanent polarization and coercive field are caused by different mechanisms, so it is possible to modulate them independently to meet the requirement of application in ferroelectric field. The concentration of oxygen vacancy increased with Rh doping, leading to the significant increase of leakage current density. The bandgap of samples doped with Rh drastically decrease and the visible light response of the sample was improved by Rh doping due to the formation of impurity energy levels within the band gap.