Coating of carbon-fiber surface by silicon carbide via sol-gel mixtures of tetraethyl orthosilicate and phenolic resin

The preparation of a SiC coating on a carbon fiber surface using a sol-gel mixture of tetraethyl orthosilicat (TEOS) and phenolic resin was studied. FTIR and SEM investigations indicated that the SiC coating can be formed by carbothermal reduction of the sol-gel mixture at 1420°C for 15–20 min in an argon atmosphere. TGA of the coated fiber was also performed, showing that the SiC coating improves the thermooxidative stability of the carbon fiber. With the thickness of the obtained coating of 0.47 μm using a C/Si ratio of 4, this treatment does not affect the carbon fiber strength.     

Quantitative studies on the movement of fluid and lymphocytes through periodontal tissue and into the draining lymph.

Chronic lymph drainage techniques in sheep have been used to map the pathways and to quantify the fluid and cell traffic through periodontal tissues. The continuous collection of cervical and prescapular lymph has demonstrated that 65% of labelled protein tracer injected into the periodontal tissues could be found in lymph over a period of 7.5 hours. Nearly 90% of the total radioactivity could be accounted for between the lymph and the tissue site. When silk was impregnated with radiolabelled albumin and a tooth ligated, the kinetics of the subsequent appearance of the tracer in lymph emphasized the ease with which macromolecules surrounding the teeth gain access to the lymphatics, regional lymph nodes, and immune apparatus. Animals were primed with BCG and then tuberculin (delayed hypersensitivity) lesions were simultaneously induced in the skin, bowel, and periodontium. When T cells were labelled with radioisotopes and their migration from blood to lymph measured, the periodontal tissue traffic pattern was distinct from the traffic pattern through DTH in the skin and also distinct from the pattern through the small intestine. This indicates that the lymphocyte traffic through the inflamed periodontium has unique features. This tissue specificity was not apparent when lesions were induced with TNFalpha. The static assessment of lymphocyte subsets within the tissues was also assessed with immunohistochemistry.     

Vanadium species in new catalysts for the selective oxidation of methane to formaldehyde: Activation of the catalytic sites

New vanadium oxide supported on mesoporous silica catalysts for the oxidation of methane to formaldehyde were investigated by infrared and Raman spectroscopies to identify and characterize the molecular structure of the most active and selective catalytic sites. In situ and operando experiments have been conducted in order to understand the redox and hydroxylation/dehydroxylation processes of the vanadium species. (SiO)₂VO(OH) species were identified in these catalysts in reaction conditions and shown to undergo a deprotonation at 580 °C under vacuum, leading to a site giving a photoluminescence band at 550 nm attributed to reverse radiative decay from the excited triplet state:

(V⁴⁺–O⁻)^*  (V⁵⁺O²⁻). An activation mechanism of vanadium monomeric species with electrophilic oxygen species is proposed.     

Penicillin vs. erythromycin in the treatment of diphtheria

PURPOSE: To review the University of Florida experience in treating ependymomas, analyze prognostic factors, and provide treatment recommendations. METHODS AND MATERIALS: Forty-one patients with ependymoma and no metastases outside the central nervous system received postoperative radiotherapy with curative intent between 1966 and 1989. Ten patients had supratentorial lesions, 22 had infratentorial lesions, and 9 had spinal cord lesions. All patients had surgery (stereotactic biopsy, subtotal resection, or gross total resection). Most patients with high-grade lesions received radiotherapy to the craniospinal axis. Low-grade intracranial lesions received more limited treatment. Spinal cord lesions were treated using either partial spine or whole spine fields. RESULTS: Of 32 intracranial tumors, 21 recurred, all at the primary site; no spinal cord tumors recurred. Overall 10-year survival rates were 51% (absolute) and 46% (relapse-free); by tumor site: spinal cord, 100%; infratentorial, 45%; supratentorial, 20% (p = 0.002). On multivariate analysis, tumor site was the only factor that influenced absolute survival (p = 0.0004); other factors evaluated included grade, gender, age, duration of symptoms, resection extent, primary tumor dose, treatment field extent, surgery-to-radiotherapy interval, and days under radiotherapy treatment. CONCLUSIONS: Patients with supratentorial or infratentorial tumors receive irradiation, regardless of grade. Craniospinal-axis fields are used when spinal seeding is radiographically or pathologically evident. Spinal cord tumors are treated using localized fields to the primary site if not completely resected. Failure to control disease at the primary site remains the main impediment to cure.     

The stability of duplexes involving AT and/or G4EtC base pairs is not dependent on their AT/G4EtC ratio content. Implication for DNA sequencing by hybridization

Sequencing by the recently reported hybridization technique requires the formation of DNA duplexes with similar stabilities. In this paper we describe a new strategy to obtain DNA duplexes with a thermal stability independent of their AT/GC ratio content. Melting data were acquired on 35 natural and 27 modified duplexes of a given length and of varying base compositions. Duplexes built with AT and/or G4EtC base pairs exhibit a thermal stability restrained to a lower range of temperature than that of the corresponding natural compounds (16 instead of 51 degrees C). The 16 degrees C difference in thermal stability observed between the least stable and the most stable duplex built with AT and/or G4EtC base pairs is mainly due to the sequence effect and not to their AT/G4EtC ratio content. Thus N -4-ethyl-2'-deoxycytidine (d4EtC) hybridizes specifically with natural deoxyguanosine leading to a G4EtC base pair whose stability is very close to that of the natural AT base pair. Oligonucleotide probes involving d4EtC can be easily prepared by chemical synthesis with phosphoramidite chemistry. Modified DNA targets were successfully amplified by random priming or PCR techniques using d4EtCTP, dATP, dGTP and dTTP in the presence of DNA polymerase. This new system might be very useful for DNA sequencing by hybridization.     

Evaluation of the Nuclisens HIV-1 QT assay for quantitation of human immunodeficiency virus type 1 RNA levels in plasma

Nuclisens HIV-1 QT is a new version of the NASBA HIV-1 QT assay for quantitation of human immunodeficiency virus type 1 (HIV-1) RNA in plasma. The specificity of this assay was 100% in one laboratory and 99%-with nonrepeatability of the initial false positive-in another. The test was linear between 2.0 and 6.0 log RNA copies per ml. According to the input HIV-1 RNA concentration, accuracy varied from -0.11 to +0.10 log RNA copy per ml and precision varied from 0.66 to 0.14 log RNA copy per ml. Reproducibility decreased when the HIV-1 RNA level was near the lower limit of quantitation of the test. HIV-1 RNA could be quantitated by Nuclisens HIV-1 QT in 36% (laboratory 1) and 24% (laboratory 2) of clinical samples with HIV-1 RNA levels lower than the lower limit of quantitation by NASBA HIV-1 QT. Nuclisens HIV-1 QT was not suitable for measurement of RNA from clade G and group O HIV-1 strains.     

A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques

Shear connectors play a prominent role in the design of steel-concrete composite systems. The behavior of shear connectors is generally determined through conducting push-out tests. However, these tests are costly and require plenty of time. As an alternative approach, soft computing (SC) can be used to eliminate the need for conducting push-out tests. This study aims to investigate the application of artificial intelligence (AI) techniques, as sub-branches of SC methods, in the behavior prediction of an innovative type of C-shaped shear connectors, called Tilted Angle Connectors. For this purpose, several push-out tests are conducted on these connectors and the required data for the AI models are collected. Then, an adaptive neuro-fuzzy inference system (ANFIS) is developed to identify the most influencing parameters on the shear strength of the tilted angle connectors. Totally, six different models are created based on the ANFIS results. Finally, AI techniques such as an artificial neural network (ANN), an extreme learning machine (ELM), and another ANFIS are employed to predict the shear strength of the connectors in each of the six models. The results of the paper show that slip is the most influential factor in the shear strength of tilted connectors and after that, the inclination angle is the most effective one. Moreover, it is deducted that considering only four parameters in the predictive models is enough to have a very accurate prediction. It is also demonstrated that ELM needs less time and it can reach slightly better performance indices than those of ANN and ANFIS.