A new boundary-layer wind tunnel at the Danish Maritime Institute

The paper describes a new boundary-layer wind tunnel at the Danish Maritime Institute in Lyngby. The wind tunnel is of the open-circuit type and is integrated into a building raised for the purpose. The design was constrained by the need to provide a simulation of the atmospheric boundary layer (without thermal stratification) and alternatively a uniform flow without excessive turbulence.The wind tunnel has a working section of principal dimensions: length 20.8 m, width 2.6 m and height 1.8 m (adjustable from 1.8 to 2.3 m). The maximum wind speed in the working section when empty is about 26 m s^?1.Data acquisition, analysis and instrumentation in relation to the new wind tunnel are discussed and, finally, an example of a simulated natural wind is presented.     

On the off-design of a natural gas-fired combined cycle with CO2 capture

During the last 15 years cycles with CO₂ capture have been in focus, due to the growing concern over our climate. Often, a natural gas fired combined cycle with a chemical absorption plant for CO₂ capture from the flue gases have been used as a reference in comparisons between cycles. Neither the integration of the steam production for regeneration of amines in the combined cycle nor the off-design behaviour of such a plant has been extensively studied before.     

The Rician inverse Gaussian distribution: a new model for non-Rayleigh signal amplitude statistics.

In this paper, we introduce a new statistical distribution for modeling non-Rayleigh amplitude statistics, which we have called the Rician inverse Gaussian (RiIG) distribution. It is a mixture of the Rice distribution and the inverse Gaussian distribution. The probability density function (pdf) is given in closed form as a function of three parameters. This makes the pdf very flexible in the sense that it may be fitted to a variety of shapes, ranging from the Rayleigh-shaped pdf to a noncentral chi2-shaped pdf. The theoretical basis of the new model is quite thoroughly discussed, and we also give two iterative algorithms for estimating its parameters from data. Finally, we include some modeling examples, where we have tested the ability of the distribution to represent locale amplitude histograms of linear medical ultrasound data and single-look synthetic aperture radar data. We compare the goodness of fit of the RiIG model with that of the K model, and, in most cases, the new model turns out as a better statistical model for the data. We also include a series of log-likelihood tests to evaluate the predictive performance of the proposed model.     

Static and Dynamic Spins in Superconducting La2−x Sr x CuO4: The Risø Years

One important area of modern condensed matter research is the investigation of the nature of the superconducting cuprates. Much progress in this field has been obtained with the technique of neutron scattering. We here present a review of neutron scattering studies of the high-temperature superconductor La_2?xSr_xCuO₄, performed at Risø National Laboratory. We review the work on the mapping of the incommensurate spin fluctuations, the investigation of the gap in the fluctuation spectrum, the magnetic properties of the vortices appearing in an applied field, and the quantum critical behaviour of the system. We discuss our findings in the light of results of neutron scattering from other groups, on other cuprate systems, and results from other experimental methods, e.g. NMR, μSR, STM, X-ray diffraction, and ARPES. We end with a discussion on the implications of the experimental results for the progress in the general understanding of high-temperature superconductivity. PACS numbers: 61.12.Ex, 74.20.Mn, 74.72.Dn, 75.25.+z, 78.70.Nx.     

Mechanical Properties of Large Arteries in Mother and Fetus during Normal and Diabetic Pregnancy

Cardiodilatin (CDD)/atrial natriuretic peptide (ANP) is a 28-amino acid peptide hormone known to be synthesized in the heart of a large number of different vertebrates. It plays an important role in the regulation of blood pressure and natriuresis/diuresis. Since the cardiovascular system of the horse has to meet the highest requirements concerning its physiological performance, we intended to characterize the cardiodilatin/atrial natriuretic peptide system of this species. By means of immunohistochemistry and immunoelectron microscopy, we precisely identified auricular cardiocytes as the loci of CDD/ANP synthesis. Using aortic smooth muscle relaxation assay and CDD/ANP-ELISA, we succeeded in isolating the biologically active prohormone. We subsequently cloned the equine cDNA of the CDD/ANP precursor protein and deduced its primary sequence. The entire precursor protein is in good agreement with the CDD/ANP prohormones of other mammals. The deduced theoretical average Mr of equine CDD/ANP-1-126 is 13,764, corresponding to the molecular weight of purified peptide determined by ESI-MS. Our findings suggest that equine CDD/ANP is produced in auricular cardiocytes and the predominant storage form of CDD/ANP in the auricle is the prohormone CDD/ANP-1-126.     

Numerical analysis of IPIRG cracked pipe experiments subjected to dynamic and cyclic loading

This report contains results of a finite element study aiming to identify the influence of loading history and geometry for cracked pipes subjected to complex loading. The experiments have been performed within the International Piping Integrity Research Group (IPIRG) Program. The majority of the numerically analyzed experiments were conducted on straight pipes with an outside diameter of 168 mm and containing a large circumferential through-wall crack. The considered pipes were loaded in four-point bending under displacement control and at a temperature of 288°C. The types of loading were combinations of either quasi-static or dynamic and also monotonic or cyclic loading with different loading ratios R. Some analyses were also performed on surface-cracked pipes subjected to slow, monotonic loading.

In the finite element study, 20-node solid elements were used for the through-wall cracked pipes and a combination of shell and non-linear line spring elements for the surface-cracked pipes. Stable crack growth was simulated by gradual node relaxation and crack closure is accounted for by using simple contact elements. The J-integral for a remote contour is calculated and used as a characterizing fracture parameter although the cyclic loading violates the theoretical basis for this procedure. The near-tip J can not be used for growing cracks because of the weak energy singularity. The results of the numerical study confirm the trends from the experiments in that a high loading rate has a negative influence on the fracture properties of the studied carbon steel and that large cyclic loading, especially at R = −1, lowers the apparent J_R-curve for both carbon and stainless steels. To some extent geometry effects appear to be present when comparing the results from pipes containing surface cracks and through-wall cracks with results from CT specimens. These effects are more pronounced for large amounts of stable crack growth than at initiation.     

Optimization algorithms for calculation of the joint design point in parallel systems

In large structures it is often necessary to estimate the reliability of the system by use of parallel systems. Optimality criteria-based algorithms for calculation of the joint design point in a parallel system are described and efficient active set strategies are developed. Three possible algorithms are tested in two examples against well-known general non-linear optimization algorithms. Especially one of the suggested algorithms seems to be stable and fast.     

Predicting patient change from therapist competence and patient-therapist complementarity in short-term anxiety-provoking psychotherapy: A pilot study.

Examined therapist competence and patient–therapist complementarity, measured by the Structural Analysis of Social Behavior system (L. S. Benjamin, 1974), as to their interrelation and their unique, collective, and interactive contributions to patient change in 20 sessions of short-term anxiety-provoking psychotherapy (STAPP; P. E. Sifneos, 1979). Patients were 15 highly educated outpatients (mean age 30 yrs) with mainly anxiety diagnoses. Therapists were in postgraduate manual-guided STAPP training. Results show that competence in an early session did not relate to patient change. In contrast, patient–therapist complementarity ratings predicted patient change both alone and over and above competence. Predictions were strongest for changes in general distress and dysfunctional attitudes and for shorter term change rather than for longer term change. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Bimanual interference associated with the selection of target locations.

Four experiments were conducted to identify the locus of interference observed during the preparation of bimanual reaching movements. Target locations were specified by color, and the right-hand and left-hand targets could be either the same or a different color. Movements of different amplitudes (Experiment 1) or different directions (Experiment 2) to targets of the same color were initiated more quickly than symmetric movements to targets of different colors. These results indicate that costs observed during bimanual movements arise during target selection rather than during motor programming. Experiments 3 and 4 further examined the interference associated with target selection. Reaction time costs were found with unimanual movements when the target was presented among distractors associated with responses for the other hand. Interference observed during bimanual reaching appears to reflect difficulty in segregating the response rules assigned to each hand. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The Physical Context of Creativity

Creative processes are complex and consist of sub‐processes, e.g. value creation, scaffolding, imagination and materialization. Creativity takes place in a physical context, i.e. in a confined space. Such space restricts and enables the free flow of sensory experiences and proximity of other people. The confinements may make certain sensory experiences available, e.g. vision of source material, sight and sound (including noise). This framing allows certain cognitive processes and restricts others. This may induce emotions that, in turn, facilitate or reduce the enhancement of creativity. Physical space affects the well‐being of people, the channels of information, the availability of knowledge tools and sets the stage for coherence and continuity, which may contribute to competitive advantages.