Long-term high-frequency validation of MODIS LST products in a Mediterranean mountain environment

The accuracy of Moderate-resolution Imaging Spectroradiometer (MODIS) level 3 1 km land surface temperature (LST) products was assessed through long-term validation carried out in a mountainous site in Sierra Nevada, southeast Spain. A total of 1458 day and night thermal images, acquired by Terra and Aqua satellites during 2008, were processed and compared to ground-truth data recorded at the meteorological station of Robledal de Cañar with a frequency of one measurement every 10 min. The purpose of this investigation was to understand whether MODIS LST data can be used as input for climate models to be constructed for mountainous environments. Several trends in the MODIS LST data were observed, including the underestimation of daytime values and the overestimation of night-time values. Although all the data sets (Terra and Aqua, diurnal and nocturnal) showed high correlation coefficients with ground measurements, only night values maintained a relatively high accuracy of approximately 2°C of annual average error. Factors that may cause errors in the MODIS LST data, like acquisition angle, cloud, and snow cover, were analysed without conclusive results. High accuracy levels, i.e. close to 1°C, similar to other validation studies carried out over simpler and much more homogenous land-cover types such as cultivated fields, have been achieved for night images acquired during the summer months, thus making these datasets reliable for their use in climatic models over mountainous regions.     

Robustness and coordination in voltage control of large-scale power systems

In this paper it is shown how the robustness and the coordination of the voltage regulation actions for the transmission grid can be improved. Simpler approaches which ensure higher robustness and performances can be used if the control objectives are pursued at two hierarchical levels of different nature. Also, this is a way to coordinate means of control of different nature with a sufficient time and methodological separation in order to avoid negative mutual influence. At the first level, called the static level, optimal reachable set-points are computed for the second control level, called the dynamic level. The static level can be combined with the shunt reactive power compensation. The system non-linearities are taken into account at the static level while the dynamic level is a linear robust predictive control which takes into account the presence of asynchronous transmission delays. The predictive control strategy is based on the separation property; the output delays are handled using an original steady-state Kalman predictor of order equal to the length of the state of the system without delays. The robustness is improved at the dynamic level against uncertain delays, parametric uncertainties (like, e.g., moderate topological errors and load variations not taken into account in the control model) and unmodelled dynamics. The two-level organisation of the control allows, on one hand, to take into account the important evolutions of the system (like, e.g., large and known topological and load changes) and, on the other hand, a coherent hybrid reactive power control: the switched control of the grid shunt compensation for the reactive power is done at the static level while the reactive power injection provided by the generators is continuously handled at the dynamic level. This is a theoretical analysis of how concepts of automatic control and voltage regulation of power systems can be combined. To be applied as a control scheme, the results presented here should be adapted to a specific context (particularities of the power system and of the organisation of the power industry). They can be used, eventually in conjunction with other improvements, to existing horizontally-organised interconnections (in which all generators of a controlled region can be easily managed since owned by the same utility) or to face specific requirements of moving to the open access in the electric power industry like, e.g., tolerating simplified models in order to cover larger regions, taking into account the interaction between regions, recalibrating set-points, assisting human operator when necessary or facilitating implementation of mechanisms for the management of the reactive power based on price signals.     

Phase transformation and microstructural evolution after heat treatment of a terbium-doped lithium–aluminum phosphate glass

The crystallization kinetics and phase transformation of a transparent Tb³⁺-doped lithium–aluminum phosphate glass, prepared by melt quenching, were investigated. The energy associated to the glass transition and the crystallization parameters (activation energy for crystallization and Avrami exponent) were evaluated by different methods using the experimental data obtained by differential thermal analysis performed at different heating rates. Using an isoconversional method to determine the change of the activation energy for crystallization with the fraction of crystallization, it was verified that with the increase in the fraction of crystallization from 0.1 to 0.9, the value of the activation energy decreased slightly from ~370 to ~310 kJ mol^?1 and that the Avrami exponent varied from 0.8 to 1, suggesting a surface crystal growth mechanism. Observation of the microstructural evolution of heat-treated glass samples confirmed a surface crystallization process revealing spherulitic crystals constituted mainly by aluminum metaphosphate.     

Analysis of methanol–ethanol mixtures from falsified beverages using a dual biosensors amperometric system based on alcohol dehydrogenase and alcohol oxidase

A portable bienzymatic analytical system was developed for the chronoamperometric analysis of methanol–ethanol mixtures. The system consists of two biosensors, one based on alcohol dehydrogenase (ADH) that responds only to the ethanol and the second one based on alcohol oxidase (AOX) that responds to both methanol and ethanol. The transducers were screen-printed electrodes (SPEs) modified with mediators: Meldola blue for ADH and Co-phthalocyanine for AOX. The calibration graph of the ADH biosensor is linear between 0.3 and 8 mmol/L ethanol. The AOX biosensor is able to quantify both analytes in mixtures that contain methanol between 3 and 70 mmol/L and ethanol ranging from 15 to 110 mmol/L. Interferences due to non-specific oxidations from common oxidizable compounds like gallic acid and ascorbic acid were smaller in the case of transducer based on Meldola blue. The analytical system was successfully tested on real samples: non-alcoholised beer (NAB) spiked with ethanol or methanol and a falsified rose wine (FRW).     

Hybrid Adaptive Control for Aerial Manipulation

This paper presents a control scheme to achieve dynamic stability in a mobile manipulating unmanned aerial vehicle (MM-UAV) using a combination of Gain scheduling and Lyapunov based model reference adaptive control (MRAC). Our test flight results indicate that we can accurately model and control our aerial vehicle when both moving the manipulators and interacting with target objects. Using the Lyapunov stability theory, the controller is proven to be stable. The simulation results showed how the MRAC is capable of stabilizing the oscillations produced from the unstable PI-D attitude control loop. Finally a high level control system based on a switching automaton is proposed in order to ensure the saftey of the aerial manipulation missions.     

Residential electricity consumption in New Member States and Candidate Countries

The European Commission-DG JRC has an ongoing research activity on assessing the electricity end uses and energy saving potential, with particular attention to the residential sector. Better equipment efficiency is one of the fastest and most cost-effective responses to limiting growing demand for electricity and at the same time to reduce CO₂ emissions [1].     

Pooling for Combination of Multilevel Forecasts

In this paper, we provide a theoretical analysis of effects of applying different forecast diversification methods on the structure of the forecast error covariance matrices and decomposed forecast error components based on the bias-variance-Bayes error decomposition of James and Hastie. We express the "diversity” of different forecasts in relation to different error components and propose a measure in order to quantify it. We illustrate and discuss typical inhomogeneities frequently occurring in the forecast error covariance matrices and show that previously proposed pooling based only on error variances cannot fully exploit the complementary information present in a set of diverse forecasts to be combined. If covariance values could be reliably calculated, they could be taken into account during the pooling process. We study the difficult case in which covariance information cannot be measured properly and propose a novel simplified representation of the covariance matrix, which is only based on knowledge about the forecast generation process. Finally, we propose a new pooling approach that avoids inhomogeneities in the forecast error covariance matrix by considering the information contained in the simplified covariance representation and compare it with the error-variance-based pooling approach introduced by Aiolfi and Timmermann. Applying our approach more than once leads to the generation of multistep and multilevel forecast combination structures, which have generated significantly improved forecasts in our previous extensive experimental work; the summary of which is also provided.     

Influence of CF<Subscript>3</Subscript>I and CBrF<Subscript>3</Subscript> on Methanol–Air and Methane–Air Premixed Flames

The suppression of CH₄ and CH₃OH premixed flames with CBrF₃ and CF₃I is examined, using computational techniques. By combining sensitivity analysis, reaction pathway analysis (based on carbon, hydrogen, bromine and iodine atom fluxes) and heat release estimation, we develop an explanation for the difference of suppression efficiencies which is qualitatively consistent with experimental cup burner data. The key reaction steps and channels responsible for the (apparent) higher inhibition efficiency of CF₃I compared to CBrF₃ in CH₃OH premixed flames are disclosed, by combining reaction pathway and heat release contribution analysis. The reaction of bromine atom dominates the decomposition channel for CH₃OH but plays a relatively minor role in the activation of CH₄, while I atom plays a minor role in CH₃OH or CH₄ activation. Accordingly, the rate of production of flame propagating radicals CH₂O and OH is higher in a CH₃OH–air–CBrF₃ system than in a CH₃OH–air–CF₃I system. The overall conclusion is that CBrF₃ contributes significantly to flame propagation for CH₃OH fuel reactions and consequently more CBrF₃ is required to extinguish a CH₃OH flame than CF₃I. Finally the explanation is validated by applying the reaction “switching-off” test.     

Correlation Between Cutting Data Selection and Chip Form in Stainless Steel Turning

This article presents investigations related to the turning of stainless steel as a representative of difficult-to-cut materials and the effectiveness of selected chip breakers working in the local machining environment. Martensitic steel AISI 416 was used to test two commercially available types of chip breaker. The efficiency of a chip breaker working in the range of cutting conditions recommended (by the tool manufacturers) was the aim of the turning tests. As a result of the investigations an algorithm of cutting condition selection, combining both the cutting tests and the simulation procedure for the efficiency of the chip breaker was created. The vision system, equipped with a high-speed camera was used for chip form estimation. Simultaneously, the cutting force components were measured to check if the simulation calculation was correct. The FEM simulation was applied to estimate the manner in which the chip groove was filled. The article presents certain recommendations for cutting condition correction in the local machining environment for the purpose of achieving an acceptable chip form.