Performances of carbon nanotube field effect transistors with altered channel length

The influence of channel length on the performances of carbon nanotube field effect transistors(CNT-FETs) has been studied.Buffered oxide etching was used to remove approximately a 60 nm layer from the original 100 nm silicon dioxide layer,to thin the dielectric layer of the back gate.Channel length of the CNT-FETs was changed along with the etching process.The dependence of drain-source current on gate voltage was measured to analyze the performance of the CNT-FETs,including the transconductance,carrier mo...     

Research status of key techniques for shock-induced combustion ramjet(shcramjet) engine

As one of the most promising propulsion systems in the future,shock-induced combustion ramjet engine can remedy the disadvantages in the integrated design of scramjet engine and airframe.It can shorten the length of the combustor,lighten the structure weight of the engine and keep better performance in a broad range of flight Mach number.The elementary principle of shock-induced combustion ramjet engine is introduced.The key technologies of this kind of propulsion system are described,while their research s...     

Experimental investigation on a parabolic trough solar collector for thermal power generation

Developing solar thermal power technology in an effective manner is a great challenge in China.In this paper an experiment platform of a parabolic trough solar collector system(PTCS) was developed for thermal power generation,and the performance of the PTCS was experimentally investigated with synthetic oil as the circulate heat transfer fluid(HTF).The solar collector's efficiency with the variation of the solar flux and the flow rate of the HTF was identified.The collector efficiency of the PTCS can be in ...     

Fold-Hopf bifurcation in a simplified four-neuron BAM (bidirectional associative memory) neural network with two delays

The bidirectional associative memory (BAM) neural network with four neurons and two delays is considered in the present paper.A linear stability analysis for the trivial equilibrium is firstly employed to provide a possible critical point at which a zero and a pair of pure imaginary eigenvalues occur in the corresponding characteristic equation.A fold-Hopf bifurcation is proved to happen at this critical point by the nonlinear analysis.The coupling strength and the delay are considered as bifurcation parame...     

Experimental study of CT test on the failure of acrylate spray-applied waterproof layer in the groundwater environment

In this study the computerized tomography (CT) was first used to quantitatively analyze the failure of acrylate spray-applied waterproof membrane in the groundwater environment. The results of the CT tests show that it is feasible to use the CT to quantitatively analyze the failure of the waterproof membrane and the CT method has the advantages of speediness and accuracy that can eliminate the fussy operation process in routine tests. The main conclusions summarized from the study are as follows. First, the...     

5KW全数字控制单级隔离型功率因数校正变换器的研究

针对当前工业界某些应用场合对高功率等级、严格的谐波标准以及输入输出隔离等要求,本文提出了一种新的结合主电路拓扑和全数字控制技术的解决方案。文章采用单级隔离型全桥结构结合传统BOOST型PFC的输入电感和RCD钳位作为主电路,并融合数字控制方案,对中大功率单级隔离型PFC进行研究。分析了主电路工作原理,建立了小信号动态模型,并详细分析了基于该模型的数字控制设计方法。提供输入输出电气隔离的变压器,允许输出可以在较大范围内调整,既可以高于输出电压也可以低于输出电压,此外允许多路输出方案。因此,变压器的加主大大拓展了此类PFC变换器的使用场合。采用的数字控制方案,同时具有良好的动态响应特性和稳态调节特性。优异的动态调节特性可成功解决模拟控制引入的变压器偏磁现象。基于本文所提出的拓扑以及控制方案,制作了5kW输出功率且开关频率为55kHz的样机,验证了该变换器的优良性能,满载功率因数达到0．994,效率超过92％。     

基于柔性多层绕组的集成EMI滤波器

本文提出一种基于柔性多层集成L—C绕组的新型EMI滤波器集成结构。通过采用此种结构,可以将共模电感,差模电感与共模电容集成为1个单元。与平面PCB绕组的集成EMI滤波器比较,具有铜损显著减小的特点。本文还介绍了实验样机和实验结果。     

一种基于单片机的数控开关电源设计

基于单片机的数控开关电源是利用单片机实现对开关电源的输出电压设定、输出电压步进调整、输出电压和输出电流显示等数字控制。本文设计的数控开关电源由两部分组成。开关电源部分采用基于PWM控制的不对称半桥功率变换器,由模拟控制芯片KA3525产生PWM信号经驱动电路实现对功率变换电路的输出电压控制,实现电压的稳定输出。数控部分采用凌阳单片机的D／A输出对KA3525的误差比较器的参考端进行数字给定,实现对输出电压的设定、步进调整和显示等功能。文中给出了系统设计框图,对各部分电路进行了分析,并给出了必要的实验波形,经测试证实设计方法是可行的。将成熟的单片机技术与现有的开关电源技术进行简单结合实现数控,值得借鉴。     

基于MATLAB的单相桥式整流电路研究

本文在对单相桥式半控擎流电路和单卡日桥式全控整流电路进行理论分忻的基础上,建立上基于MATLAB／Simulink的单相桥式整流电路的仿真模型,并对其带纯电阻负载及电阻电感性负载时的工作情况进行对比分析与研究。用MATLAB软件自带的Power System工具箱进行仿真,给出了仿真结果,验证,本文所建模型的正确性。     

LD抽运的Nd~(3+):YAG-Cr~(4+):YAG组合单晶自调Q激光器的研究

用激光二极管 (LD)连续抽运单体复合型Cr4+∶YAG Nd3 +∶YAG单晶微棒 ,获得重复频率为 10kHz ,脉冲宽度为 10ns的调Q激光输出。输出平均功率为 18mW ,实验结果与理论计算的脉冲宽度和重复频率与抽运功率之间的关系基本相符