Structural and optical properties of nc-Si:H thin films deposited by layer-by-layer technique

Hydrogenated nanocrystalline silicon (nc-Si:H) thin films deposited on c-Si and quartz substrates by layer-by-layer (LBL) technique using radio-frequency plasma enhanced chemical vapour deposition system. The effects of rf power on the interlayer elemental profiling, structural and optical properties of the films were investigated by Auger electron spectroscopy, Fourier transform infrared spectroscopy, Raman scattering spectroscopy, X-ray diffraction and optical transmission and reflection spectroscopy. The results revealed that the LBL deposition leads to a formation of different ranges of crystallite sizes of nc-Si corresponds 3–6 and 8–26 nm respectively. LBL deposition also demonstrated a capability to increase the crystalline volume fraction of nc-Si up to 65.3 % with the crystallite size in between 5 and 6 nm, at the rf power in between 80 and 100 W. However, the crystalline volume fraction decreased for the rf power above 100 W due to the growth of nc-Si was suppressed by the formation of SiO₂. In addition, the onset of crystallization of the films deposited on c-Si and quartz substrates are different with increase in the rf power. The effects of rf power on the growth of nc-Si, and the hydrogen content, structural disorder, crystallite size of nc-Si and oxygen diffusion into the LBL layer with the change of optical energy gap under the variation of rf power are also discussed.     

Polyphenolic composition and in vitro antioxidant activities of native‐ and tannase‐treated green tea extracts

The antioxidant activities of native‐ and tannase‐treated green tea extracts along with their major polyphenol components were investigated. The polyphenolic content and composition of the tea before and after tannase treatment were determined by liquid chromatography coupled with mass spectrometry (LC‐MS). Approximately 99% of the (?)‐epigallocatechin gallate (EGCG) and (?)‐epicatechin gallate (ECG) in green tea extract were converted by tannase to (?)‐epigallocatechin (EGC) and (?)‐epicatechin (EC), respectively, after 30 min. Biotransformed green tea exhibited a significantly higher DPPH˙ radical scavenging activities than native green tea (EC₅₀ value of 0.024 ± 0.001 and 0.044 ± 0.001 mg mL^?1, respectively). Kinetic parameters such as scavenging rate and stoichiometry were calculated. The rate of DPPH˙ radical scavenging activities for tannase‐treated green tea extract was shown to be higher than native green tea extract.     

Adhesion enhancement of sol-gel coating on polycarbonate by heated impregnation treatment

The main limitation in using coated plastics for optical components, electronic applications and display systems is the softness of the substrate surfaces, which is responsible for the low impact and abrasion resistance and weak adhesion between the coating and the substrate. In this paper, we report a new strategy for surface pre-treatment of plastics using heated vacuum equipment and sol-gel materials to provide both chemical bonds and penetrated hard layer into the plastic surface to increase the overall performance of the coated plastic components. The heated vacuum treatment process involves: (1) surface cleaning and pore opening by heating and vacuum conditions, (2) impregnation of hydrolyzed hybrid precursor into polymer substrate under pressure and elevated temperature, (3) aminolysis of diffused precursor with surface to form chemical bonds and hardened surface layer, (4) formation of chemical bonds at treated surface with sol-gel hard coating. An impregnation depth of 1.5 µm was detected. Water contact angle dropped to below 40° and roughness increased after treatment. These provided better adhesion by increased wettability and contact area. Much increased nanoindentation hardness and Young's modulus after impregnation provided a gradient in mechanical properties between soft substrate and hard sol-gel coating. The hardened substrate delays the plastic deformation in substrate during pencil scratch test, thereby preventing early gouge failure. Both the better adhesion and the delayed gouge failure contributed to the increased scratch resistance from 6B to 8H after sol-gel coating.     

Levels of polybrominated diphenyl ether (PBDE) flame retardants in animals representing different trophic levels of the North Sea food Web

The levels of individual PBDE congeners were investigated in the invertebrate species whelk (Buccinum undatum), seastar (Asterias rubens), and hermit crab (Pagurus bernhardus), the gadoid fish species whiting (Merlangius merlangus) and cod (Gadus morhua), and the marine mammal species harbor seal (Phoca vitulina) and harbor porpoise (Phocoena phocoena). These species are all important representatives of different trophic levels of the North Sea food web. All six major PBDE congeners detected (BDEs 28, 47, 99, 100, 153, and 154) are most prevalent in the commercial Penta-BDE formulation. There is no evidence for the occurrence of the Octa-BDE formulation in the North Sea food web, since its dominant congener, BDE183, was never detected. BDE209, the main congener (> 97%) in the Deca-BDE formulation, was detected only in a minority of the samples and always in concentrations around the limit of detection. Since BDE209 is often the major BDE congener in sediments from the area, the main reason for its low concentrations in biota from the North Sea seems to be a relatively low bioaccumulation potential. This can either be due to a low uptake rate of the very large molecule or a relatively rapid excretion after biotransformation. Since all invertebrates investigated are sentinel species, they are highly representative for the area of capture. The highest lipid-normalized concentrations of PBDEs in the invertebrates occurred near the mouth of the river Tees at the East coast of the UK. The geographical distribution of the PBDEs can be explained by the residual currents in the area. The direction of these currents differs between the summer and the winter season as a result of the presence or absence of vertical summer stratification of the deeper waters north of the Dogger Bank. Summer stratification results in the development of a density-driven bottom water current formed after the onset of vertical stratification of the water column in May leaving the UK coast near Flamborough Head toward the Dogger Bank. In winter, the residual currents run in a more southerly direction and follow the UK coastline. The distribution pattern of the PCBs and p,p'-DDE in the invertebrates was entirely different from that of the PBDEs, which could be expected, since the use of these organochlorines in western Europe peaked in the 1960s and 1970s but has been forbidden more than two decades ago, whereas the production and use of the penta-BDE formulation is of a more recent origin. The higher trophic levels of the North Sea food web were represented by the predatory gadoid fish species whiting and cod and the marine mammal species harbor seal and harbor porpoise. The lipid-normalized levels of the six major PBDE congeners in fish were similar to the levels in the invertebrates, but a biomagnification step in concentrations of generally more than an order of magnitude occurred from gadoid fish to marine mammals. Based on the limited number of samples, no differences could be observed between harbor seal and harbor porpoise. In summary, the results in three species of sentinel invertebrates from a network of stations covering a major part of the North Sea basin showed that the estuary of the river Tees at the UK East coast is a major source for tri- to hexa-PBDEs. Throughout the food-chain, the most marked increase in (lipid-normalized) levels of all six PBDE congeners occurred from predatory (gadoid) fish to marine mammals, agreeing with the transition from gill-breathing to lung-breathing animals. This has serious consequences for the route of elimination of POPs, since their elimination from the blood into the ambient seawater via the gill-membrane is no longer possible.     

Fatal gastrointestinal haemorrhage due to coexisting primary aorto-enteric and aorto-colic fistulae. Complicating untreated atheromatous abdominal aortic aneurysm

We report a case of aorto-enteric and aorto-colonic fistulae in a 73 year old man with no previous abdominal surgery which resulted in massive gastrointestinal haemorrhage and death and was undiagnosed despite several hospital admissions and endoscopic examinations. This case serves to highlight an extremely rare but fatal condition, which is potentially treatable, if an early diagnosis is made.     

Universal active unit for active RC-circuit synthesis

A complementary pair of embedding principles for the differential-input earthed-output operational amplifier are combined to obtain a general-purpose resistive embedding which is universal from the strict synthesis point of view in that all four types of controlled source (`transactor?) may be realised with either sign.     

Atmospheric transport of polybrominated diphenyl ethers and polychlorinated biphenyls to the Baltic Sea

The atmospheric transport of polybrominated diphenyl ethers (PBDEs) and polychlorinated biphenyls (PCBs) was compared by measuring concentrations in air and deposition on an island located in the central basin of the Baltic Sea. Median sigmaPBDE and sigmaPCB concentrations (gaseous + particle) were 8.6 and 7.4 pg m(-3), respectively. Airborne PCBs were mainly found in the gaseous phase, while most of the PBDEs were detected on particles, which agrees with predicted particle/gas distributions. SigmaPBDE levels were dominated by the decabrominated BDE209 followed bythe tetrabrominated BDE47 and pentabrominated BDE99. BDE209 is a marker for the environmental distribution of the commercial deca-BDE formulation (>99.5% BDE209), whereas BDE47 and BDE99 are markers for the commercial penta-BDE mixture. General correlations between PBDEs and PCBs suggested similarities in sources and transport mechanism, while more detailed examination of the data identified notable behaviors and exceptions. Differences in regression slopes among tetra-, penta-, and decabrominated PBDEs may reflect different transport processes and the change in usage pattern. Tetra- and pentabrominated PBDEs may originate from secondary sources such as air surface exchange in a manner similar to that of the PCBs, while the deca-BDE209 formulation still has primary sources. The tribrominated BDE17 was also detected and is proposed to be a breakdown product due to atmospheric debromination processes. PBDEs had higher washout ratios than PCBs, explaining their higher concentrations compared to PCBs in precipitation (median of 6.0 and 0.5 ng L(-1) for sigmaBDE and sigmaPCB concentrations ("dissolved" + particle), respectively) than in air. The calculated yearly deposition of PBDEs and PCBs indicated that the atmospheric input of PBDEs to the Baltic Proper is currently exceeding that of the PCBs by a factor of 40, while that of the PCBs is decreasing.     

Surface efficiency measurements on a high-modulus carbon fibre composite reflector antenna at L- and S-band frequencies

The r.f. surface reflectivity of a parabolic antenna reflector fabricated from carbon fibre reinforced plastic with high modulus fibres, has been investigated at L- and S-band frequencies by a swept frequency gain comparison method. The gain of the antenna with the reflector uncoated was compared with that of the same unit but with a metal coating on the reflector.