New wideband GaAs travelling-wave device: linear gate transistor

A new device called the linear the gate transistor (LGT) is described which promises in excess of 20 GHz flat-band performance in a single compact structure. The LGT is designed and modelled using a unique software package developed for all travelling-wave structures. Results from a prototype LGT are reported.     

Dual formation of carpets of large carbon nanofibers and thin crystalline carbon nanotubes from the same catalyst-underlayer system

A dense, micron-tall layer of carbon nanofibers (CNFs) was grown above a layer of carbon nanotubes (CNTs) during the same synthesis using a thick cobalt catalyst (15 nm). The CNFs had large diameters (100 nm) and were amorphous while the CNTs had small diameter (10–20 nm) and were crystalline. Base growth mechanism was at play for both the nanofibers and the nanotubes. High-resolution transmission electron microscopy characterization suggested that the main mechanisms leading to the growth of the two structures were based on the dewetting of the catalyst layer and its subsequent alloying with the Ta underlayer. We can extend these principles to grow diverse carbon nanostructures during the same synthesis using appropriate multilayer thin films for different applications, especially for electrochemical cells and supercapacitors.     

Comparison of PCR and quantitative real-time PCR methods for the characterization of ruminant and cattle fecal pollution sources

The State of California has mandated the preparation of a guidance document on the application of fecal source identification methods for recreational water quality management. California contains the fifth highest population of cattle in the United States, making the inclusion of cow-associated methods a logical choice. Because the performance of these methods has been shown to change based on geography and/or local animal feeding practices, laboratory comparisons are needed to determine which assays are best suited for implementation. We describe the performance characterization of two end-point PCR assays (CF128 and CF193) and five real-time quantitative PCR (qPCR) assays (Rum2Bac, BacR, BacCow, CowM2, and CowM3) reported to be associated with either ruminant or cattle feces. Each assay was tested against a blinded set of 38 reference challenge filters (19 duplicate samples) containing fecal pollution from 12 different sources suspected to impact water quality. The abundance of each host-associated genetic marker was measured for qPCR-based assays in both target and non-target animals and compared to quantities of total DNA mass, wet mass of fecal material, as well as Bacteroidales, and enterococci determined by 16S rRNA qPCR and culture-based approaches (enterococci only). Ruminant- and cow-associated genetic markers were detected in all filters containing a cattle fecal source. However, some assays cross-reacted with non-target pollution sources. A large amount of variability was evident across laboratories when protocols were not fixed suggesting that protocol standardization will be necessary for widespread implementation. Finally, performance metrics indicate that the cattle-associated CowM2 qPCR method combined with either the BacR or Rum2Bac ruminant-associated methods are most suitable for implementation.     

Trisneopentylgallium as a precursor for atomic layer epitaxy of GaAs

We report the use of a new precursor, trisneopentylgallium (NPG) for the growth of GaAs by atomic layer epitaxy (ALE). In contrast to most other alkyl gallium precursors such as triethylgallium, which decompose via a β-hydride elimination mechanism, this compound undergoes homolysis similar to that of trimethylgallium (TMGa), the normal choice as an ALE precursor. Clear self-limiting growth behavior similar to that of TMGa was observed over a reasonably wide range of growth conditions (430–500°C). Carbon incorporation was not significantly reduced compared with TMGa suggesting that the adsorbed neopentyl radicals undergo decomposition to result in a methyl terminated surface identical to that obtained for growth with TMGa.     

Characterizing errors in airborne laser altimetry data to extract soil roughness

Airborne laser altimetry has the potential to make frequent detailed observations that are important for many aspects of studying land surface processes. However, the uncertainties inherent in airborne laser altimetry data have rarely been well measured. Uncertainty is often specified as generally as 20 cm in elevation and 40 cm planimetric. To better constrain these uncertainties, we present an analysis of several datasets acquired specifically to study the temporal consistency of laser altimetry data and, thus, assess its operational value. The error budget has three main components, each with a time regime. For measurements acquired less than 50 ms apart, elevations have a local standard deviation in height of 3.5 cm, enabling the local measurement of surface roughness of the order of 5 cm. Points acquired seconds apart acquire an additional random error due to differential geographic positioning system fluctuation. Measurements made up to an hour apart show an elevation drift of 7 cm over a half hour. Over months, this drift gives rise to a random elevation offset between swathes, with an average of 6.4 cm. The root mean square planimetric error in point location was derived as 37.4 cm. We conclude by considering the consequences of these uncertainties on the principle application of laser altimetry in the U.K. intertidal zone monitoring.     

Reproducibility of fluorine-18-6-fluorodopa positron emission tomography in normal human subjects

We calculated the mean energy required to produce an ion pair (W) in methane-, propane- and butane-based tissue-equivalent (TE) gas mixtures from W values in pure constituent gases according to various models for energy partition among gas components. We found an agreement between the experimental and calculated W values in the methane-based TE gas regardless of the model concept. In contrast, only those models which take into account differences in the stopping powers, total ionization cross sections and model constants of gas components give acceptable results for the propane-based TE gas. The calculated W value for high-energy electrons in the isobutane-based TE gas mixture is 25.2 eV for high-energy electrons and 28.0 eV for approximately 5 MeV alpha particles.