Polyether-metal salt complexes: 1. The elevation of the glass transition temperature of polyethers by metal salts

Various metal halides have been dispersed in high and low molecular weight, amorphous poly(propylene oxide), by solution blending techniques, to give single phase polymeric complexes which remained thermoplastic even at very high salt loadings. These complexes were amorphous and showed a single well-defined glass transition temperature (T_g) by differential thermal analysis with the T_g of the complex up to 140°C greater than the T_g of the parent polymer. The T_g elevation depended upon both the amount and the type of salt added and for a given salt the elevation followed a sigmoidal curve which levelled out at high salt concentrations. The T_g data have been interpreted in terms of a chelate ring model involving the co-ordination of two adjacent ether oxygen atoms in the polymer backbone to the salt. Using this model it was possible to consider the complex as a random copolymer consisting of complexed and uncomplexed monomer units. The contribution of crosslinking by metal salts to the elevation of T_g was assessed by studying poly(tetramethylene glycol)-zinc chloride complexes in which chelate formation is entropically unfavourable. Mechanical data are reported for ZnCl₂ complexes with high molecular weight poly(propylene oxide). The results indicate that ZnCl₂ increased the rubbery modulus and this has been interpreted in terms of ZnCl₂ forming a few, weak intermolecular crosslinks.     

Electrooxidation of CO and CO/H2 mixtures on a Pt-Sn catalyst prepared by an implantation method

A new type of ion implantation technique is used to create a non-equilibrium Pt-Sn(IMP) near-surface alloy with ca. 8.6 at% Sn. The surface composition was determined by low-energy ion-scattering (LEIS). The kinetics of the electrooxidation of CO and 2% CO/H₂ mixtures on Pt-Sn(IMP) is essentially identical to that of Pt₃Sn(110). The fact that any non-equilibrium composition can be easily prepared by this implantation method opens an interesting practical opportunity to create a new Pt-Sn alloy fuel cell catalyst having an otherwise unobtainable surface composition of Sn. This method also appears to have general utility in alloy catalysis as a means of exploring compositions in thermodynamically unfavorable regions of the bulk phase diagram. This revised version was published online in July 2006 with corrections to the Cover Date.     

Elimination of the halphen response of cottonseed oils in conjunction with deodorization

Two simple but effective pilot-plant processes were developed to produce Halphen-negative cottonseed oil. Both involve treatment of the oil with cottonseed fatty acids in a conventional batch type of deodorizer in conjunction with deodorization. In one process, in which the acids were added to the oil, the cyclopropenoids were inactivated in as short a time as 5 min after the oil reached the maximum temperature of 450–455 F. In the other, in which the acids were generated in situ, the oil did not become Halphennegative until about an hour and 45 min after it reached maximum temperature. The excess acids produced by both methods were readily removed during conventional deodorization. In contrast, deodorization alone reduced the cyclopropenoid content of the oil to a low level (0.02%) but did not render it Halphen-negative even after 3 hr at maximum temperature. These new processes are directly applicable for use by refineries that have the batch type of deodorizers. For refineries that operate continuous or semicontinuous deodorizers, it should be relatively simple to design preheating vessels or heat exchangers to inactivate partially or completely the cyclopropenoids before deodorization. Presented at the AOCS Meeting, New Orleans, May 1967. So. Utiliz. Res. Dev. Div., ARS, USDA.     

Assessing the predictive capability of two‐phase models for the mechanical behavior of alumina/epoxy nanocomposites

A review of analytical modeling of particulate reinforcement is made as a prelude to the problem of microstructural inhomogeneity in nanocomposite materials. Noting the inevitability of dispersion nonuniformity, and variations in agglomerate morphology and filler‐matrix interaction, the need to question the application of such models to novel materials arises. Employing the mechanical properties of alumina/epoxy nanocomposites, with known dispersion characteristics, an evaluation of the predictive capability of various models for Young's modulus, strength, and failure strain is made. Comparison between models is accompanied by a discussion of the parameters used in the fitting of macroscopic behavior to microstructural features. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 869–879, 2005     

Quantitative estimation of sucrose esters of plamitic acid

Thin layer chromatography was adapted for direct quantitative estimation of sucrose esters of palmitic acid. Urea-phosphoric acid spray was used to detect the sucrose moiety of the various esters. The photometrically metermined density density of each spot on the thin layer plate was found to be proportional to its sucrose content. Ester content was then obtained by multiplying sucrose found by the factor, mol. wt. ester/mol. wt. sucrose. Ester mixtures were prepared by interesterifying sucrose with various proportions of methyl palmitate in dimethylformamide solution. Positional isomers were observed at each level of substitution but could not be adequately separated from each other for quantitative evaluation. Presented at the AOCS Meeting, Minneapolis, October 1969. So. Utiliz. Res. Dev. Div., ARS, USDA.     

Oxygen permeation of blends of copolymers of siloxanes and poly(methylmethacrylate)

A series of low molecular weight (≈40000) copolymers of methylmethacrylate (MMA) and 4-(methacryloyloxy)butylpentamethyldisiloxane (MBPD) have been synthesized by free radical polymerization in dimethylformamide solution. The microstructure, as derived from ¹³C NMR spectra, indicates that the copolymers are about 80% syndiotactic with an overall random distribution of mers. At room temperature, copolymers rich in MMA are clear, rigid glasses but become liquid at high MBPD content. Blends of these copolymers with PMMA are all heterogeneous with visible phase separation over most of the composition range. Differential scanning calorimetry studies show the presence of two T_g's when the relative concentration of PMMA to copolymer is high. Blends of two co-polymers of similar siloxane content produce clear films with no indication of phase separation. The permeability to oxygen at 25°C increases from 0.20 for pure PMMA to 3.0 (fmol/m·s·Pa.) for a copolymer of MMA/MBPD of the mole ratio of 3:1. Evaluation of the permeation behaviors of the blends suggests that blends rich in siloxane exist as a layered structure with the PMMA rich component dominating the observed permeability.     

Application of scanning tunnelling microscopy to the quality control of tungsten carbide (WC-Co) ball bearings

Scanning tunnelling microscopy (STM) has been applied to the topographical study of tungsten carbide (with 6% Co) ball bearings in air. It is shown that, for this material, scanning tunnelling microscopy can provide not only general topographical information on the surface microtexture with a resolution of nearly 0.1 nm if required, but also quantitative information for the measurement of surface roughness. Thus, scanning tunnelling microscopy has utility as a quality control tool of particular relevance in the submicron range. The STM topographical results from specific tungsten carbide ball bearings are presented, and the limitations and applicability of the STM technique when used as a quality control tool are discussed.     

Working towards sustainable urban water management: the vulnerability blind spot

The unprecedented water scarcity in Australia coincides with the adoption of a new urban water rhetoric. The 'Security through Diversity' strategy has been adopted in a number of Australian cities as a new and innovative approach to urban water management. Although this strategy offers a more holistic approach to urban water management, in practice, the Security through Diversity strategy is largely being interpreted and implemented in a way that maintains the historical dependence on large scale, centralised water infrastructure and therefore perpetuates existing urban water vulnerabilities. This research explores the implementation of Security through Diversity as the new water scarcity response strategy in the cities of Perth and Melbourne. Through a qualitative study with over sixty-five urban water practitioners, the results reveal that the practitioners have absorbed the new Security through Diversity language whilst maintaining the existing problem and solution framework for urban water management. This can be explained in terms of an entrenched technological path dependency and cognitive lock-in that is preventing practitioners from more comprehensively engaging with the complexities of the Security through Diversity strategy, which is ultimately perpetuating the existing vulnerability of our cities. This paper suggests that greater engagement with the underlying purpose of the security though diversity strategy is a necessary first step to overcome the constraints of the traditional technological paradigm and more effectively reduce the continued vulnerability of Australian cities.     

Sensitivity analysis for the SimpleTreat model to simulate fate of chemicals in sewage treatment plants

SimpleTreat 3.1 predicts the distribution and elimination of chemicals by sewage treatment. The model is used as the default calculation in EUSES 2.0 to estimate exposure concentration in the receiving water, soil and air. A sensitivity analysis was performed to rank input parameters according to their influence on model predictions. Triclosan was selected for the base case. The sewage flow, degradation rates and parameters describing the raw sewage were shown to be the most sensitive inputs. The pH and dissociation constant are very sensitive parameters when working with ionisable compounds. Variation in certain input parameters was propagated through the model to yield greater variation in output parameters with a maximum ratio of 4.0. SimpleTreat 3.1 is a steady state model describing a highly non-steady system. A large variability in the most sensitive parameters is expected within a single sewage plant and parameters should therefore be selected to cover this variability.     

Entrepreneurial acquisitions,open innovation and UK high growth SMEs

This paper examines the dynamics of entrepreneurial acquisitions undertaken by UK high growth small and medium enterprises (SMEs). While entrepreneurial acquisitions are increasingly deployed by SMEs, little is known about their antecedents, motivational drivers and organisational outcomes. Drawing on detailed case study evidence from Scotland, the key factor found to be driving these acquisitions was the desire to augment and exploit technological complementarities between the acquiring and acquired firms. Acquisition can therefore be conceptualised as an advanced stage of the outside-in ‘open innovation’ strategies proactively used within these innovative SMEs. Firms executing this strategy typically have an acute propensity for risk, a desire for close customer engagement, effective business models and strong external orientation. The work suggests that greater attention should be paid within M&A theory to the dynamics of these types of smaller scale entrepreneurial acquisitions.