Sequestration of Cesium and Strontium by Tobermorite Synthesized from Fly Ashes

Tobermorites were synthesized from oxides and from fly ashes under mild hydrothermal conditions. The bulk compositions of the ash-based formulations were adjusted to give the same [Ca]/[Si + Al] ratio as for the oxides. Selective Cs and Sr exchange with these tobermorites was measured. Compared to those prepared from the oxides and from class C fly ash, the tobermorites obtained from class F fly ash exhibited superior Cs and Sr selective properties. This is apparently a result of more extensive Al incorporation with class F fly ash. For example, tobermorite synthesized from class F fly ash exhibited a cesium K _d (mL/g) of 3826 while those prepared from oxides and from class C fly ash showed K _d values of 1112 and 796, respectively, under the same conditions. These results suggest that fly ash waste materials can be converted into tobermorite, which can serve as a resource in the separation, immobilization, and disposal of radioactive species such as Cs and Sr.     

POTENTIOSTATIC TESTING OF THIN SILICON NITRIDE FILMS

Micron-thick silicon nitride can be plasma-deposited as a conformal coating over complex geometries in microelectronic assemblies. The resulting films are dense and chemically inert, providing an effective diffusion barrier against chemical attack as long as the films remain mechanically intact. Potentiostatic methods have been developed to evaluate the effectiveness of these films over 3-dimensional microelectronic structures. Coated test structures were made the anode in NaCl solution and the resulting anodic dissolution of underlying metal was found to be a sensitive indicator of cracks or pinholes in these films and is similar to the corrosion reactions that pose reliability problems in field usage. This method was used to rank the film's ability to protect flat metalized silicon, stitch bonds, and Al bondwires from chemical attack. The same electrochemical method was used in conjunction with a four-point bending method to detect the onset of microcracking during measurements of the film's net ultimate strain.     

Association of seed size with genotypic variation in the chemical constituents of soybeans

Ten soybean genotypes grown in 1992 with seed size ranging from 7.6 to 30.3 g/100 seeds and maturity group V or VI were selected and tested for oil and protein content and for fatty acid composition. In these germplasm, protein varied from 39.5 to 50.2%, oil, 16.3 to 21.6%, and protein plus oil, 59.7 to 67.5%. Percentages of individual fatty acids relative to total fatty acids varied as follows: palmitic, 11.0 to 12.8; stearic, 3.2 to 4.7; oleic, 17.6 to 24.2; linoleic, 51.1 to 56.3 and linolenic, 6.9 to 10.0. Seed size showed no significant correlations with individual saturated fatty acids, protein or oil content. However, significant correlations were found between seed size and individual unsaturated fatty acids: positive with oleic, and negative with linoleic and linolenic. Oil and protein content were negatively correlated with each other. Among the major fatty acids, only the unsaturated were significantly correlated with each other: negative between oleic and linoleic or linolenic, and positive between linoleic and linolenic. A subsequent study with soybeans grown in 1993 generally confirmed these findings. Variation in relative percentages of unsaturated fatty acids andr values for most pairs of relationships were even higher than those obtained from the 1992 crop. Presented at the 85th AOCS Annual Meeting and Expo, Atlanta, Georgia, May 8–12, 1994.     

Calibration of a high resolution grating soft x-ray spectrometer

The calibration of the soft x-ray spectral response of a large radius of curvature, high resolution grating spectrometer (HRGS) with a back-illuminated charge-coupled device detector is reported. The instrument is cross-calibrated for the 10-50 A? waveband at the Lawrence Livermore National Laboratory electron beam ion trap (EBIT) x-ray source with the EBIT calorimeter spectrometer. The HRGS instrument is designed for laser-produced plasma experiments and is important for making high dynamic range measurements of line intensities, line shapes, and x-ray sources.     

Electron-beam-induced reduction of Fe in iron phosphate dihydrate,ferrihydrite, haemosiderin and ferritin as revealed by electron energy-loss spectroscopy

The effect of high-energy electron irradiation on ferritin/haemosiderin cores (in an iron-overloaded human liver biopsy), its mineral analogue; six-line ferrihydrite (6LFh), and iron phosphate dihydrate (which has similar octahedral ferric iron to oxygen coordination to that in ferrihydrite and ferritin/haemosiderin cores) has been investigated using electron energy-loss spectroscopy (EELS). Fe L_2,3-ionisation edges were recorded on two types of electron microscope: a 200 keV transmission electron microscope (TEM) and a 100 keV scanning transmission electron microscope (STEM), in order to investigate the damage mechanisms in operation and to establish a methodology for minimum specimen alteration during analytical electron microscopic characterisation. A specimen damage mechanism dominated by radiolysis that results in the preferential loss of iron co-ordinating ligands (O, OH and H₂O) is discussed. The net result of irradiation is structural re-organisation and reduction of iron within the iron hydroxides. At sufficiently low electron fluence and particularly in the lower incident energy, finer probe diameter STEM, the alteration is shown to be minimal. All the materials examined exhibit damage which as a function of cumulative fluence is best fitted by an inverse power-law, implying that several chemical and structural changes occur in response to the electron beam and we suggest that these are governed by secondary processes arising from the primary ionisation event. This work affirms that electron fluence and current density should be considered when measuring mixed valence ratios with EELS.     

Upgraded vacuum arc ion source for metal ion implantation

Vacuum arc ion sources have been made and used by a large number of research groups around the world over the past twenty years. The first generation of vacuum arc ion sources (dubbed "Mevva," for metal vapor vacuum arc) was developed at Lawrence Berkeley National Laboratory in the 1980s. This paper considers the design, performance parameters, and some applications of a new modified version of this kind of source which we have called Mevva-V.Ru. The source produces broad beams of metal ions at an extraction voltage of up to 60 kV and a time-averaged ion beam current in the milliampere range. Here, we describe the Mevva-V.Ru vacuum arc ion source that we have developed at Tomsk and summarize its beam characteristics along with some of the applications to which we have put it. We also describe the source performance using compound cathodes.     

Design and evaluation of an imaging spectrophotometer incorporating a uniform light source

Accounting for light that is diffusely scattered from a surface is one of the practical challenges in reflectance measurement. Integrating spheres are commonly used for this purpose in point measurements of reflectance and transmittance. This solution is not directly applicable to a spectral imaging application for which diffuse reflectance measurements are desired. In this paper, an imaging spectrophotometer design is presented that employs a uniform light source to provide diffuse illumination. This creates the inverse measurement geometry to the directional illumination/diffuse reflectance mode typically used for point measurements. The final system had a spectral range between 400 and 1000 nm with a 5.2 nm resolution, a field of view of approximately 0.5 m by 0.5 m, and millimeter spatial resolution. Testing results indicate illumination uniformity typically exceeding 95% and reflectance precision better than 1.7%.     

Slope reliability and back analysis of failure with geotechnical parameters estimated using Bayesian inference

A Bayesian approach is proposed for the inference of the geotechnical parameters used in slope design. The methodology involves the construction of posterior probability distributions that combine prior information on the parameter values with typical data from laboratory tests and site investigations used in design. The posterior distributions are often complex, multidimensional functions whose analysis requires the use of Markov chain Monte Carlo (MCMC) methods. These procedures are used to draw representative samples of the parameters investigated, providing information on their best estimate values, variability and correlations. The paper describes the methodology to define the posterior distributions of the input parameters for slope design and the use of these results for evaluation of the reliability of a slope with the first order reliability method (FORM). The reliability analysis corresponds to a forward stability analysis of the slope where the factor of safety (FS) is calculated with a surrogate model from the more likely values of the input parameters. The Bayesian model is also used to update the estimation of the input parameters based on the back analysis of slope failure. In this case, the condition FS = 1 is treated as a data point that is compared with the model prediction of FS. The analysis requires a sufficient number of observations of failure to outbalance the effect of the initial input parameters. The parameters are updated according to their uncertainty, which is determined by the amount of data supporting them. The methodology is illustrated with an example of a rock slope characterised with a Hoek-Brown rock mass strength. The example is used to highlight the advantages of using Bayesian methods for the slope reliability analysis and to show the effects of data support on the results of the updating process from back analysis of failure.