Structure–property relationships of poly(urethane urea)s with ultra‐low monol content poly(propylene glycol) soft segments. I. Influence of soft segment molecular weight and hard segment content

Structure–property relationships in poly(urethane urea)s synthesized with ultra‐low monol content poly(propylene glycol) soft segments were investigated as soft segment molecular weight (2000, 4000, and 8000 g/mol) and hard segment content (6.3 and 9.0 wt %) were varied. Morphological features such as interdomain spacing and interphase thickness were quantified and revealed with small‐angle X‐ray scattering (SAXS) and atomic force microscopy (AFM). The thermal and mechanical behavior was assessed with a dynamic mechanical analyzer (DMA) and by differential scanning calorimetry (DSC) and stress‐strain tests. Hard segment content, over the limited range studied, had little effect on the morphology and soft segment thermal and mechanical properties. The molecular weight of the soft segments had considerably more influence on the morphology and mechanical properties. Increasing soft segment molecular weight resulted in greater interdomain spacings, as shown by SAXS, and a noticeable change in the structure, as shown by AFM. Additionally, as soft segment molecular weight decreased the soft segment glass transition broadened and rose to higher temperatures. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 229–243, 2002; DOI 10.1002/app.10168     

SOLUBILITY OF CO2 AND H2S IN A HINDERED AMINE SOLUTION

The solubility of H₂S and CO₂ in aqueous solutions of the sterically hindered amine, 2-amino-2-methyl-1-propanol (AMP), was determined at 40 and 100°C. Partial pressures of C)₂ ranged from approximately 2 to 6000 kPa and of H₂S from 2 to 2200 kPa. The solubility results were compared with previously reported acid gas solubilities in aqueous monoethanolamine (MEA) solutions.     

The Thermodynamic Properties of Silicon Oxynitride

A critical assessment of thermal and equilibrium data for silicon oxynitride (Si₂N₂O) is presented. Selected values for the heat of formation of Si₂N₂O from the elements and the absolute entropy of Si₂N₂O at 298.15 K are ΔH⁰_f,298=−947.7 ± 5.4 kJ/mol and S⁰₂₉₈= 45.35 ± 0.4 J/mol·K, respectively. A table of thermodynamic functions for Si₂N₂Ofrom 298 to 2500 K, which has been calculated from the analysis of the literature data, is also presented.     

Flow Regime Maps for Flow of Liquid Through Downcomer in a Turbulent Bed Contactor

The provision of a downcomer to classical turbulent bed Contactor (TBC) increases the gas treating capacity of the equipment. When the downcomer is provided, it is expected that all the liquid passes through the downcomer only without any liquid flow through the distributor. In the present study, the operational regime for the flow of liquid only through the downcomer is experimentally evaluated for various geometric parameters and particle characteristics. It is observed that the preferred operational regime without dumping and weeping increases with an increase in Archimedes number and downcomer diameter, and decreases with an increase in static bed height and downcomer weir height. Correlations are proposed to satisfactorily predict experimentally observed operational regime.     

Scalable Realistic Rendering with Many‐Light Methods

Recent years have seen increasing attention and significant progress in many‐light rendering, a class of methods for efficient computation of global illumination. The many‐light formulation offers a unified mathematical framework for the problem reducing the full lighting transport simulation to the calculation of the direct illumination from many virtual light sources. These methods are unrivaled in their scalability: they are able to produce plausible images in a fraction of a second but also converge to the full solution over time. In this state‐of‐the‐art report, we give an easy‐to‐follow, introductory tutorial of the many‐light theory; provide a comprehensive, unified survey of the topic with a comparison of the main algorithms; discuss limitations regarding materials and light transport phenomena and present a vision to motivate and guide future research. We will cover both the fundamental concepts as well as improvements, extensions and applications of many‐light rendering.     

Iron(II)‐based catalysts for ethene oligomerization

The synthesis of iron(II) complexes with various tridentate di(imino)pyridine ligands and their potential as ethene oligomerization catalysts are described. The ligands are characterized by ¹H‐ and ¹³C‐NMR spectroscopy and the complexes only by mass spectrometry due to their paramagnetism. After activation either with methylalumoxane (MAO) or with a heterogeneous cocatalyst consisting of partially hydrolyzed trimethylaluminum and silica gel, the prepared complexes proved to be good catalysts for the oligomerization of ethene. 1‐Octene, 1‐hexene, and 1‐decene were the major products, formed in very high isomeric purity (99.9 %). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 476–482, 2003     

Thermal degradation kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate)

The degradation kinetics of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate), a member of the Nodax family of polymers, were investigated using transient constant shear rate and dynamic time sweep rheological tests. The rate of chain scission at several times and temperatures was correlated with viscosity data and verified using molecular weight determination of the degraded samples. The experimental results show that the molecular weight and the viscosity of Nodax decrease with time over the range of temperatures that were studied (155–175°C). The degradation kinetics, which exhibited first‐order behavior, were determined as a function of the flow history and thermal history. An apparent activation energy of 189 ± 5 kJ/mol for thermal degradation was found by modeling variations in the rate with temperature using an Arrhenius law model. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 66–74, 2005     

Accumulation of eicosapentaenoic acid in plasma phospholipids of subjects fed canola oil

The metabolism of α-linolenic acid from canola oil was studied in eight normolipidemic men. The 42-day study was divided into three periods: a 6-day pre-experimental and two 18-day experimental. Approximately 75% of the dietary fat (28% of total energy) was provided by a mixture of fats during the pre-experimental period and either canola oil (CO) or sunflower oil (SO) during the experimental periods. The CO and SO diets were fed in a cross-over design. The ratios of linoleic to linolenic acid were 2.6∶1 and 73.9∶1 in the CO and SO diets, respectively. Dietary fat source had an effect on plasma phospholipid fatty acids: 18∶1n−9, 18∶3n−3 and 20∶5n−3 were higher (p<0.05), and 18∶2n−6 was lower in the phosphatidylcholine fraction; 18∶1n−9 was higher and 20∶4n−6 lower in the phosphatidyl-ethanolamine fraction; and 18∶1n−9 and 20∶5n−3 were higher and 20∶4n−6 and 22∶6n−3 were lower in the alkenylacyl-ethanolamine phospholipid fraction on the CO diet as compared to the SO diet. Consumption of the canola oil diet resulted in higher n−3 fatty acid levels and lower n−6 fatty acid levels in plasma phospholipids than consumption of the sunflower oil diet.