Preliminary model of the Ribeira Grande geothermal field (Azores Islands)

On the basis of a geological - volcanological - geophysical survey, integrated with petrological and geochronological data, a structural model, including a shallow magmatic body, was defined for the Ribeira Grande area, Sao Miguel island (Azores). Two series of production tests were carried out in the Pico Vermelho 1 and Ribeira Grande 1 wells, which led to a preliminary definition of the deep fluid circulation. The data obtained from these studies were used to reconstruct a preliminary model of the Ribeira Grande geothermal field.     

Removal of organics from water in an aeration basin : A mathematical model

A mathematical model was developed to describe the removal of volatile organic compounds from drinking water in aeration basins. The model was used to simulate removal under a range of expected treatment conditions using the Continuous Systems Modeling Program. Results indicated that temperature and air-to-water ratio are the major factors influencing the removal of chloroform from water in an aeration basin. Bubble diameter was a lesser factor while liquid residence time had the smallest effect of the variables examined.     

A pattern recognition-based approach for phylogenetic network construction with constrained recombination

The tree representation of evolutionary relationship oversimplifies the view of the process of evolution as it cannot take into account the events such as horizontal gene transfer, hybridization, homoplasy and genetic recombination. Several algorithms exist for constructing phylogenetic networks which result from events such as horizontal gene transfer, hybridization and homoplasy. Very little work has been published on the algorithmic detail of phylogenetic networks with constrained recombination. The problem of minimizing the number of recombinations in a phylogenetic network, constructed using binary DNA sequences, is NP-hard. In this paper, we propose a pattern recognition-based O(n²) time approach for constructing the phylogenetic network, where n is the number of nodes or sequences in the input data. The network is constructed with the restriction that no two cycles in the network share a common node.     

Octave-tunable miniature RF resonators

The development and testing of a miniaturized, high-Q, broadly tunable resonator is described. An exemplary device, with a center frequency that is continuously tunable from 1.2 to 2.6GHz, was tested in detail. Experimental results demonstrated a resonator Q of up to 380, and typical insertion loss of -1.9dB for a 25MHz 3-dB bandwidth. These resonators have been used to stabilize a broadly-tunable oscillator with phase noise of -132dBc/Hz at 100-kHz offset, with a center frequency tunable from 1.2-2.6GHz, and a tuning speed of 1GHz/ms.     

Effect of carbon black composite (CBC) support properties on hydrodesulfurization performance of sulfided Mo and Co, and carburized Mo, catalysts

Carbon black composites (CBCs) have been prepared by pyrolyzing mixture of a carbon black with polyfurfuryl alcohol and then pretreated by oxidation with nitric acid, gasification with water steam or ammoxidation. The effects of the chemical character of the carrier surface, nature of the active metal phase and pH value of the impregnation solution on the catalytic activity towards the hydrodesulfurization (HDS) of thiophene of the CBC supported Mo (Co) catalysts were determined. It was stated that the catalytic properties of the CBC supported sulfides of Mo or Co and of Mo carbides are affected by the chemical character of the carrier surface. Generally, catalysts supported over basic surface CBC exhibit higher activity than those ones supported over CBC possessing acidic surface character. Co catalysts supported on acidic surface show lower activity (per mol of active metal) than Mo based ones supported on the same carrier. In the case of catalysts supported on basic CBC, Co exhibits distinctly higher activity than Mo. At the experimental conditions adopted for this study, CBC surface properties, active phase nature, and catalyst impregnation pH were found to exert a relatively small influence on both HDS and hydrogenation activities.     

Nitrification parameter measurement for plant design: experience and experimental issues with new methods.

Nitrification kinetics are important for process design, optimization, and capacity rating of activated sludge wastewater treatment plants. A Water Environment Research Foundation (WERF) project on Methods for Wastewater Characterization in Activated Sludge Modeling (WERF, 2003) focused significantly on the development of procedures for measuring the nitrifier maximum specific growth rate, micro(AUT). In addition, the importance of (and lack of data for) the nitrifier decay rate, b(AUT), was identified. This paper describes three bench-scale methods for measuring micro(AUT): the Low F/M SBR, Washout and High F/M methods. During the WERF project, the importance of pH and temperature control was investigated briefly; this paper summarizes further experimental work performed to address these issues. A summary of micro(AUT) measurements in a number of locations and using the different measurement techniques is provided.