Sheet metal forming of piezoceramic-metal-laminar structures—Simulation and experimental analysis

Adaptive systems with piezoelectric components offer significant opportunities for the active control of dynamic behaviour. Vibration and acoustics control as well as structural health monitoring are also possible. However ineffective production technologies prevent industrial applications. The authors are therefore proposing the integration of piezo-modules inside a double-layer sheet. The use of semi-cured adhesive avoids shear-forces being transferred to the piezo-modules during forming. After forming the adhesive will cure and the transfer of piezoelectric strain to the sheet is made possible. A detailed finite-element-model incorporating the electro-mechanical characteristics of the piezo-modules has been developed. The simulation results were validated experimentally.     

Design of reflectors which will distribute sunlight in a specified manner

A differential equation is obtained for the shape of a reflecting surface which will distribute axially symmetric light intensity into a specified irradiance over a receiver surface which is symmetric about the direction of the incident light. Results are applied to the design of rotationally symmetric solar reflectors and also to a 2-dimensional geometry, that is one in which the reflector is a cylinder with its axis perpendicular to the incident beam. The procedure is used to numerically calculate the shape of reflectors which will uniformly concentrate collimated light and also light from a point source over a flat receiver surface. Results are also applied to determine the shape of a reflector which will distribute collimated light uniformly over the surface of a cylinder and also over a sphere.     

On the cost of uniform protocols whose memory consumption is adaptive to interval contention

Recently, we introduced a novel term, memory-adaptive, whose goal it is to capture what it means for a distributed protocol to most efficiently make use of its shared memory. We proved three results that relate to the memory-adaptive model in the uniform setting. We considered a store/release protocol where processes are required to store a value in shared MWMR memory so that it cannot be overwritten until it has been released by the process. We showed that there do not exist uniformly wait-free store/release protocols using only the basic operations read and write that are memory-adaptive to point contention. We further showed that there exists a uniformly wait-free store/release protocol using only the basic operations read, write, and read-modify-write that is memory-adaptive to interval contention and time-adaptive to total contention. This left a significant gap — it remained open as to whether there exists a uniform, memory adaptive to interval contention store/release protocol that only uses read/write (no read-modify-write) registers. In this paper, we close this gap by showing that no such protocol can exist. We furthermore illustrate the validity and practicality of the concept of memory adaptiveness by providing a uniform, memory-adaptive to interval contention store/release protocol for Network Attached Disks.     

Differential interference contrast x-ray microscopy with twin zone plates

X-ray imaging in differential interference contrast (DIC) with submicrometer optical resolution was performed by using a twin zone plate (TZP) setup generating focal spots closely spaced within the TZP spatial resolution of 160 nm. Optical path differences introduced by the sample are recorded by a CCD camera in a standard full-field imaging and by an aperture photodiode in a standard scanning transmission x-ray microscope. Applying this x-ray DIC technique, we demonstrate for both the full-field imaging and scanning x-ray microscope methods a drastic increase in image contrast (approximately 20x) for a low-absorbing specimen, similar to the Nomarski DIC method for visible-light microscopy.     

First observation of the fourth neutral polarization point in the atmosphere

In the clear sky there are three commonly known loci, the Arago, Babinet, and Brewster neutral points, where the skylight is unpolarized. These peculiar celestial points, bearing the names of their discoverers, have been the subject of many ground-based investigations, because their positions are sensitive indicators of the amount and type of atmospheric turbidity. According to theoretical considerations and computer simulations, there should exist an additional neutral point approximately opposite to the Babinet point, which can be observed only at higher altitudes in the air or space. Until now, this anonymous "fourth" neutral point has not been observed during air- or space-borne polarimetric experiments and has been forgotten, in spite of the fact that the neutral points were a basic tool in atmospheric research for a century. Here, we report on the first observation of this fourth neutral point from a hot air balloon. Using 180 degrees-field-of-view imaging polarimetry, we could observe the fourth neutral point at 450, 550, and 650 nm from different altitudes between 900 and 3500 m during and after sunrise at approximately 22 degrees - 40 degrees below the anti-solar point along the anti-solar meridian, depending on the wavelength and solar elevation. We show that the fourth neutral point exists at the expected location and has characteristics similar to those of the Arago, Babinet, and Brewster points. We discuss why the fourth neutral point has not been observed in previous air- or space-borne polarimetric experiments.     

The road to RoboCup 2050

The ultimate goal of the RoboCup initiative is stated as follows: by mid-21st century, a team of fully autonomous humanoid robot soccer players shall win the soccer game, comply with the official rule of the FIFA, against the winner of the most recent World Cup. The authors consider this goal from the perspective of how close we are to it and what has to be done to reach it     

Anagrelide in control of myeloproliferative thrombocythemia: long-term experiences in 6 patients

Symptomatic or asymptomatic chronic elevation of platelet count can be observed in all forms of myeloproliferative disorders (MPD). Benefits and limitations of the traditional platelet-reducing agents, such as radioactive phosphorus, alkylating agents, hydroxyurea and interferon alpha, are well known and have been largely described. Anagrelide (Agrelin) is an additional newer drug with a selective platelet-lowering effect. We describe our own long-term experience in 6 patients with MPD who were treated with anagrelide as part of a compassionate-use protocol between April 1991 and August 1997. The median duration of therapy was 54 months (range 17 to 75 months), with an overall response rate of 100% (complete and partial response for at least 4 weeks). The initial median platelet count of 1211 x 10(9)/l (range 847 to 2050 x 10(9)/l) was reduced rapidly and lastingly to 570 x 10(9)/l (range 216 to 667 x 10(9)/l) at the time of the last control. Under treatment with anagrelide 4 of the 6 patients showed a reduction of disease-associated symptoms or complications. Adverse reactions were generally mild and transitory, and no interruption or cessation of therapy was required. Development of drug resistance or late adverse events were not observed. Treatment with anagrelide is effective, safe and in our opinion easy to administer. It also appears to be suitable for long-term administration.