基于光通信的数据单向导入系统的设计与实现

随着信息网络的日趋成熟,网络信息安全尤其是内网信息安全,越来越受到人们的关注,成为一时研究的热点。其中如何防止在移动存储设备与内网计算机信息交流过程中内网信息流失的问题,显得尤为迫切。为此,本文提出一种基于光通信的数据单向导入系统,为用户提供一种安全地将信息或者数据单向导入到内网的解决方案。利用光的单向性,从传输通道上卡断了反向的可能,有效地保护内网的机密信息不会流失到外部,同时做到良好的人机交互,用户可以任意选择存储设备中的文件发送。     

浅谈TCP拥塞控制与其改进思路

如今网络已经离不开人们的生活,发展势头迅猛,网络的终端设备不仅在数量上,种类也越来越多,在此发展之下,保证大量的网络数据传输与网络性能相协调是极其重要的,经典的TCP拥塞控制机制是网络发展历史中人们想出的一种解决网络拥塞的方法,但如何适应当今网络发展的需求相信还是靠人们不断的探索来寻找合适的答案。本文致力于对经典TCP拥塞控制机制的讨论并提出相应的改进思路     

Physical properties of transition to chaos in RF-driven Josephson junction analog

An analog circuit is used to investigate the behavior of the transition to chaos in the rf-driven Josephson junction under the variation of excitation amplitude and frequency with McCumber parameter >1. A series of transitions is observed, including a hysteretic jump, symmetry breaking, period doubling, and intermittency prior to chaos, and the transition boundaries are given in a state diagram in the vs. parameter space. Thus, the sequence of transitions to chaos can be inferred from this diagram. Based on these results, the harmonic balance method and Floquet theory are applied to study the instability of the transition series. It is suggested that all these transitions to chaos can be explained as parametric excitations. In addition, the transition boundaries in the state diagram can be satisfactorily computed from the conditions with a Floquet multiplier =±1.     

A Realistic Computer-Simulated Brain Phantom for Evaluation of PET Charactenstics

To evaluate accurately the imaging characteristics of positron emission tomography (PET), a realistic computer-simulated brain phantom was developed. A cross-sectional slice from a human cadaver brain was chosen for its combination of gray matter, white matter, and cerebrospinal fluid (CSF) regions. The slice was photographed and digitized into a gray-level image with a video digitizer, boundary edges were located around cerebral structures in the digitized image, and each structural region was assigned a uniform pixel value dependent on both the cerebral parameter (e.g., blood flow, oxygen uptake, metabolic rate) under investigation and the type of structure (gray matter, white matter, CSF). Line integrals through the regions were generated at various angular and transverse positions according to specific physical characteristics (such as detector line-spread function) of a tomographic scanner configuration to create a set of simulated but realistic projection measurements. The set of projection measurements can be processed with any standard reconstruction program to create a tomographic image to reveal the effects of various PET characteristics. Investigations with this computer-simulated brain phantom have demonstrated its usefulness for examining the interrelations among neuroanatomical structure volume, tomographic spatial resolution, partial volume effect, and nonlinear parameter estimation. Transportability of the simulated phantom and the procedure to other medical imaging environments is described, and limitations of this simulation procedure are discussed.     

Photothermal radiometric detection and imaging of surface cracks

This paper discusses surface crack detection by photothermal radiometric imaging (PRI). In PRI, also called dynamic infrared scanning, a surface is scanned with a spot of heat. Imperfections are detected by radiometrically sensing changes in the surface temperature of a small area in the vicinity of this spot. In the work described, cracks narrower than 25 µm (0.001 in.) in a lightly rusted steel surface have been detected. Indiscrete scanning an amplitude modulated heating beam is moved in steps, remaining at each location long enough to measure amplitude and phase of the AC temperature. Incontinuous scanning a constant intensity heating beam is moved continuously while the temperature deviations are measured. This paper presents methods of calculating amplitude and phase of surface temperature for discrete scanning and instantaneous temperature for continuous scanning across a surface crack. For a steel surface scanned by a watt-level laser beam, predicted surface temperature deviations when crossing the crack are several degrees Celsius, with expected radiometrically detected power several orders of magnitude above the detector noise. In experiments performed, both techniques easily detected narrow cracks in a smooth, clean surface. Discolorations and pits, on the other hand, generate a disturbing type of surface noise. This noise was minimized by differential detection. Based on results obtained, continuously scanned PRI with a fan-type heating beam and array detection could become a viable way of mapping surface cracks at practical scanning speeds.     

除油剂除锈剂发黑剂的进展

从逐渐不采用强酸碱的角度回顾了除油、除锈、发黑及电镀等技术近年的进展情况,介绍和评价了这类技术涉及的一些市售商品,提出了进一步推广应用这些材料必须解决的问题。     

THERMAL DEBINDING OF A NEW BINDER

ＴＨＥＲＭＡＬＤＥＢＩＮＤＩＮＧＯＦＡＮＥＷＢＩＮＤＥＲ①ＺｈｏｕＪｉｃｈｅｎｇ，ＨｕａｎｇＢａｉｙｕｎ，ＷｕＥｎｘｉ，ＹｕＬｉｇｏｎｇ，ＱｕＸｕａｎｈｕｉＮａｔｉｏｎａｌＫｅｙＬａｂｏｒａｔｏｒｙｆｏｒＰｏｗｄｅｒＭｅｔａｌｕｒｇｙ，Ｃｅｎｔｒａ...     

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining

Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining was carried out to investigate microfracture, residual damage, and surface roughness associated with material removal and surface generation. Brittle versus plastic deformation was studied using Vickers indention and nano-indentation. To characterize the abrasive machining response, the 6H-SiC (0001) substrates were ground using diamond wheels with grit sizes of 25, 15 and 7 μm, and then polished with diamond suspensions of 3 and 0.05 μm. It is found that in indentation, there was a scale effect for brittle versus plastic deformation in 6H-SiC substrates. Also, in grinding, the scales of fracture and surface roughness of the substrates decreased with a decrease in diamond grit size. However, in polishing, a reduction in grit size of diamond suspensions gave no significant improvement in surface roughness. Furthermore, the results showed that fracture-free 6H-SiC (0001) surfaces were generated in polishing with the existence of the residual crystal defects, which were associated with the origin of defects in single crystal growth.     

稀土钕对激光快速成形TC4合金组织及性能的影响

针对氢化脱氢钛合金粉末氧含量较高的问题，研究了添加稀土钕对激光快速成形TC4合金组织及性能的影响。结果发现，添加稀土Nd后，激光快速成形TC4合金的宏观晶粒尺寸变化不大；但随稀土添加量的增加，初始β列状晶逐渐转化为全β等轴晶，晶粒内部的魏氏α组织逐渐转变为网篮α，粗化α条不断增多，呈现团束聚集趋势，晶界α集束体积分数也不断增大；随稀土添加量的增加，激光快速成形TC4合金的室温塑性先大幅度提高，然后急剧降低；稀土添加量为0．1％～0．2％（质量分数，下同）时，氧含量为0．26％的氢化脱氢TC4合金粉末激光快速成形件沉积态的抗拉强度达975MPa，延伸率9．5％，满足锻件标准要求。     

焊缝跟踪技术的研究与展望

本文回顾了电弧焊接的焊缝跟踪技术，并重点对该技术的发展趋势进行了介绍与分析，