快干型芭蕉芋淀粉粘合剂的制备

介绍一种快干型芭蕉芋淀粉粘合剂，它特别适合于粘结瓦楞纸板，其制法是芭蕉芋等直链淀粉含量较代低的天然植物淀粉为原料，经氧化、糊化、交联等步骤而制得；产品结力强，产品性能稳定，贮存期长。     

碱金属和锌对高炉用SiAlON结合刚玉砖的复合侵蚀

将高炉用SiAlON结合刚玉砖制成外部尺寸为50mm×50mm,内孔尺寸为25mm×25mm的坩埚,分别加入由Na2CO3、K2CO3、ZnO和宝钢高炉现场高炉灰配制的炉渣(其w(Na2O+K2O)=2.75%,w(ZnO)=5.1%)和用K2CO3、ZnO、石墨配制的炉渣(其w(Na2O+K2O)=25%,w(ZnO)=25%),然后分别在还原气氛下于1350℃16h和1100℃40h进行侵蚀试验。将侵蚀后的试样纵向对称剖开,观察渣对试样的侵蚀和渗透情况,进行SEM和EDAX分析。结果表明:碱金属和锌含量不同的两种炉渣对SiAlON结合刚玉砖的侵蚀速度都很小;碱金属侵蚀机理主要是SiAlON与碱蒸气反应生成钾霞石,与渣反应生成铁橄榄石,并参与硅酸盐玻璃相的生成;刚玉颗粒与渣中的FeO、Na2O和K2O反应生成铁铝尖晶石和少量针状β-Al2O3;锌对该砖没有产生明显的化学侵蚀。     

民族文化差异与日用陶瓷的文化营销

在经济全球化的背景下,由于民族文化、区域文化差异性和多样性的存在,日用陶瓷企业在开展国际营销活动时需要一个行之有效的营销策略。本文通过分析民族文化差异,为日用陶瓷企业实施国际文化营销提供一些建议。     

大学物理实行分层次因材施教改革探讨

本文结合近五年多我校大学物理的分层次教学改革的实践,介绍了一些值得借鉴和推广的经验,对下步如何深入分层次、分类型教学的具体设想和目标进行了探讨。     

疲劳与蠕变复合作用下PS的应变与寿命

对PS在疲劳/蠕变复合作用下应变与寿命进行了研究。结果表明：其疲劳/蠕变曲线与纯蠕变曲线十分相似。加载时间周期越短和疲劳载荷变化越频繁。结束普弹应变阶段应变越小，进入延迟弹性变形的平台应变阶段越早。在疲劳/蠕变复合作用下聚苯乙烯存在疲劳和蠕变的交互损伤，其断裂寿命比纯疲劳或纯蠕变的断裂寿命低。断裂寿命减小，疲劳/蠕变的交互损伤程度与温度密切相关，PS在较低温度的疲劳/蠕变交互损伤作用大于较高温度的交互损伤作用。随温度升高，疲劳/蠕变断裂寿命下降是疲劳和蠕变各自的单独损伤增加所致。     

基于北部湾地区特色的化工项目规划课程教学改革和探索

广西地处泛北部湾核心地带,该地区化工行业结合国家发展战略和区域优势,得到迅猛发展。文章围绕泛北部湾地区化工行业发展对人才的需求,针对化工项目规划课程教学改革,提出了一种适合广西地方发展特色的化学工程专业学位人才培养模式。     

UASB-SBR工艺处理城市生活污水的研究

研究了UASB工艺处理城市生活污水的可行性，通过UASB与SBR组合工艺的运行实验，得出在水力停留时间3h时，COD去除率为61．67％-82．32％，出水COD达到国家污水排放二级标准。在氮磷去除效果不佳的情况下，采用SBR工艺处理后，其出水COD、SS、氮、磷等指标均达到国家污水一级排放标准。     

纤维素衍生物液晶相转变和织态结构

本文综述了纤维素衍生物液晶态相转变和织态结构。描述了纤维素衍生物从各向同性态向液晶态的转变过程和液晶态的织构特征。讨论了溶液浓度和温度对液晶相织构的影响。探讨了各种因素,如溶剂、取代基含量、外加力场和外加磁场等对液晶相的形成及织态结构的影响。     

Diffusion and sorption of benzene vapor through polybutadiene‐, polybutadiene/styrene‐, and polybutadiene/acrylonitrile‐based polyurethanes

A series of polyurethane (PU) films made from toluene diisocyanate (TDI), 1,4‐butanediol (BDO), and hydroxyl‐terminated polybutadiene (HTPB), hydroxyl terminated polybutadiene/styrene (HTBS), or hydroxyl terminated polybutadiene/acrylonitrile (HTBN) was synthesized by solution polymerization. The absorption of benzene vapor was found mainly in the soft phase. The equilibrium adsorption (M_∞) was reduced with increasing hard segment content for all the PUs. The values of M_∞ were in the sequence of HTBN‐PUs > HTBS‐PUs > HTPB‐PUs, which could be explained by the different interaction parameters between soft segments and benzene. The HTBN‐PU film showed the lowest degree of phase segregation and had more hard segments intermixed in the soft phase, restricting the movement of soft segments, and therefore resulted to non‐Fickian behavior, while the HTPB‐PU is antithetical. FTIR and atomic force microscopy were utilized to identify the hydrogen bonding behavior and morphology change of the PU films before and after the absorption of benzene vapor. The tensile strength of the HTBN‐PUs showed a greater decrease than that of HTBS‐PUs and HTPB‐PUs after absorbing benzene vapor. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2984–2991, 2004     

Mass production of high-quality multi-walled carbon nanotube bundles on a Ni/Mo/MgO catalyst

A new catalyst (Ni/Mo/MgO) is reported, with which one can synthesize multi-walled carbon nanotube (MWNT) bundles with a yield of more than 45 times the amount of the pristine catalyst, using a methane-hydrogen mixture as precursor. Powder X-ray diffraction, Raman spectroscopy and thermal gravimetric analysis show that the purity of the as-prepared MWNTs is over 97%. The diameter of the carbon nanotubes is 9-20 nm, measured by high-resolution electron microscopy on 421 individual MWNTs. The high purity of the as-prepared MWNTs allows us to omit the usual complex purification process required for carbon nanotubes synthesized by chemical vapor deposition. Because of its durable high activity, the Ni/Mo/MgO catalyst in its pristine state is ideal for mass production of high-quality MWNTs. The synergism of nickel and molybdenum is considered the main reason for the high yield of carbon nanotubes.