6，7-二氢-5H-环戊烷并[b]吡啶

6,7-二氢-5H-环戊烷并[b]吡啶主要用于药物、杀菌剂和抗菌剂的研究,也被广泛应用于制备植物保护剂和合成树脂、防老剂以及塑料制品等。目前因其被作为第四代抗生素头孢匹罗的侧链而成为研究者竞相开发的热点。6,7-二氢-5H-环戊烷并[b]吡啶有实用价值的合成方法主要有N-羟基邻苯二甲酰胺法、丙烯醛法和己二酸二乙酯法。丙烯醛法中6,7-二氢-5H-环戊烷并[b]吡啶的收率为87.4%,具有较好的开发前景。     

Computer simulation of electrospinning. Part I. Effect of solvent in electrospinning

Electrospinning technique has been recognized as an efficient method to manufacture nano-fiber. At present, research focuses on the structure and morphology of the fibers, a few investigations have been reported the mechanism of electrospinning. In our experiment, appropriate polymer EVOH (ethylene/vinyl alcohol copolymer) and different solvents were chosen, the energy change in the process of molecule orientation was analyzed by computer simulation, and the morphologies of the fiber were indicated by scanning electron microscope (SEM). Results indicate that: in the process of molecule orientation, some barriers should be overcome; the height of the barrier is determined by the relaxation times (τ) of the molecule. The relaxation times vary in different solutions, when the relaxation time is short, the orientation of molecule is easy, so jet instability will be fierce, and fibers with small diameter are obtained.     

六维腕力传感器非线性正解耦方法设计

多维力传感器利用其多个转换单元完成测量加载于其结构上未知负载的作用效果,解耦是其设计的重要组成部分。针对传统静态线性解耦方法的不足,试图将传统线性解耦方程扩展为多项式结构,受其多元高次方式通解形式的启发,构造了一种多项式非线性静态正解耦方程,该方法无需传统线性解耦方法中的曲线拟合、逆解,不依赖以系统是线性为前提,且方程可以扩展成任意结构的多项式。实验结果表明:该方法能降低输出耦合误差。     

新型空穴传输材料N,N′-二苯基-N,N′-二(3-甲苯基)-4,4′-联萘胺的合成、薄膜发光与能级比较

将有机电致发光中最常用的空穴传输材料N,N′-二苯基N,N′-二(3甲苯基)-4,4-′联苯胺(TPD)中的联苯以联萘代替,合成了新型空穴传输材料N,N′-二苯基N,N′-二(3-甲苯基-)4,4′-联萘胺(PMPN)。与TPD在熔点、薄膜发光、量子效率和电化学行为上进行了比较。PMPN比TPD(m.p.175℃)有稍低的熔点、稍高的电离势,更高的薄膜荧光量子效率。联萘的引入可以增大体系的共轭作用,对载流子传输有益。通过构效关系的分析,可以对进一步合成高性能空穴材料进而得到高性能的有机电致发光器件有所借鉴。     

CaCO3/natural rubber latex nanometer composite and its properties

Calcium carbonate/natural rubber (NR) latex nanometer composites were prepared by adding nanometer CaCO₃ whose surface had been treated to natural rubber latex (NRL) before sulfuration. The physical, thermooxidative aging, and thermal degradation properties and the ultra‐microstructure were analyzed with a multipurpose material testing meter, a thermal analysis meter and a Philips XL‐30 SEM, respectively. The results showed that the structures and properties of nanometer composites could be clearly improved by NRL mixed with surface‐treated nanometer CaCO₃. The physical properties of the nanometer composites were best when the content of surface treatment agent was 2.5% (to nanometer CaCO₃), the nanometer CaCO₃/NRL content was 3:100, and the stirring time for treating the surface of the nanometer CaCO₃ was 20 min. Simultaneously, the thermooxidative aging resistance of the nanometer composites also was significantly improved. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3442–3447, 2006     

A kinetic model for polystyrene (PS) pyrolysis reaction

A mathematical model for the pyrolysis reaction of polystyrene (PS) in a semi-batch reactor has been presented. The thermal degradation of PS was flexibly modeled by a combination of random and specific chain-end scissions. Numerical simulation was used to investigate the effect of operating conditions on the PS products spectrum, the results of which were validated by the experimental data. It was found that as the reaction temperature increased (decreased), the monomer fraction in the products became lower (higher) while the trimer higher (lower). No significant variation in the product composition was, however, observed while constant temperature was maintained. These results indicate the reaction temperature is an effective manipulated variable for the control of products composition of PS pyrolysis. The calculation of the optimum temperature trajectories through the optimization study can thus be of interest for achieving productivity enhancement in plastics pyrolysis processes. This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement from Korea University.     

Continuous Self‐Collision Detection for Deformable Surfaces Interacting with Solid Models

In this paper, we propose a new continuous self‐collision detection (CSCD) method for a deformable surface that interacts with a simple solid model. The method is developed based on the radial‐view‐based culling method. Our method is suitable for the deformable surface that has large contact region with the solid model. The deformable surface may consist of small round‐shaped holes. At the pre‐processing stage, the holes of the deformable surface are filled with ghost triangles so as to make the mesh of the deformable surface watertight. An observer primitive (i.e. a point or a line segment) is computed so that it lies inside the solid model. At the runtime stage, the orientations of triangles with respect to the observer primitive are evaluated. The collision status of the deformable surface is then determined. We evaluated our method for several animations including virtual garments. Experimental results show that our method improves the process of CSCD.     

Improved electrochemical redox performance of 2,5-dimercapto-1,3,4-thiadiazole by poly(3-methoxythiophene)

High electrocatalytic activity of an electropolymerized film of poly(3-methoxythiophene) (PMOT) is reported toward the redox reaction of 2,5-dimercapto-1,3,4-thiadiazole (DMcT) as a promising cathode material for the lithium ion battery. Cyclic voltammetry showed improved electrochemical performance of DMcT on PMOT-coated Pt electrode, indicating accelerated redox kinetics. Moreover, charge-discharge tests exhibited higher discharge capacity and slower capacity fading of the PMOT-doped DMcT composite cathode compared with pure DMcT.     

电除尘器分电场灰密度变化规律及粉煤灰密度与成份的关系

本文介绍粉煤灰经电除尘器分离后所得分电场灰密度沿电场方向的变化规律及影响因素，并阐述了粉煤灰密度与成份之间的关系。     

A New Derivation of the Cubature Kalman Filters

This paper investigates the cubature Kalman filtering (CKF) for nonlinear dynamic systems. This third‐degree rule based filter employs a spherical‐radial cubature rule to numerically compute the integrals encountered in nonlinear filtering problems, thereby removing the requirements of explicitly computing the Jacobians. The cubature rule, however, requires computing the intractable integrals over a high‐dimensional spherical region for multidimensional applications. Moreover, the cubature formula that has been used to construct the spherical cubature formula has some demerits, most notably its inconvenient properties in computation and low estimation accuracy. Aimed at these issues, a general class of CKFs that uses only cubature rules is derived in this paper. It can be shown that the conventional CKF is a special case of the proposed algorithm. The paper also includes higher‐degree CKFs, especially two representative types of the fifth‐degree CKFs. Performance of the proposed algorithms is demonstrated via two target tracking problems. The experimental results, presented herein, illustrate the superior performance of higher‐degree CKFs to conventional nonlinear filters.