Reconstruction of three-dimensional objects through matching oftheir parts

The problem of re-assembling an object from its parts or fragments has never been addressed with a unified computational approach, which depends on the pure geometric form of the parts and not on application-specific features. We propose a method for the automatic reconstruction of a model based on the geometry of its parts, which may be computer-generated models or range-scanned models. The matching process can benefit from any other external constraint imposed by the specific application     

A Proposed Receiver Structure for Optical Communication Systems that Employ Heterodyne Detection and a Semiconductor Laser as a Local Oscillator

Coherent heterodyne detection in optical communication is degraded by phase instabilities present when a semiconductor laser is used as a local oscillator. Postdetection processing that accounts for these instabilities is suggested, based on a diffusion-process model for oscillator instabilities and a maximum-likelihood sequence-estimator of information symbols modulating the received light.     

Fatty acid composition of phospholipids and neutral lipids during embryonic and early larval development in Atlantic herring (Clupea harengus,L.)

The fatty acid compositions of total polar and total neutral lipids of Atlantic herring eggs and larvae were determined immediately before fertilization, after fertilization and at various times during subsequent embryonic and early larval development. Within 3 hr after fertilization the percentage of total PUFA in neutral lipid decreased from 33% to 20%, with a reciprocal increase in monoenes. Thereafter the percentage of PUFA in the neutral lipids increased progressively, attaining the original level in ripe eggs by the time of yolk sac absorption. During the larval stages the percentage of PUFA continued to increase in the neutral lipid, reaching almost 44% of the total by day 32 after fertilization, although it was reduced to 32% by day 36. The percentage of monoenes in the neutral lipid displayed a progressive decrease during the whole period of development from 3 hr after fertilization. Throughout all the developmental periods the fatty acid composition of total polar lipids remained essentially constant. The polar lipids of the yolk sac displayed virtually the same fatty acid composition as the larval bodies, but the neutral lipids of the yolk sac were low in PUFA compared to the larval bodies. The results are discussed with reference to changes in lipid class composition during development. The conservation of high levels of PUFA in lipids during embryogenesis and early larval development reflects the importance of these fatty acids during development.     

POLARIZATION BEHAVIOR OF PACKED-BED ELECTRODES: A COMPARATIVE STUDY OF EXPERIMENTAL AND MODELING RESULTS

The current distribution and overall polarization behavior of electrodeposition at a flow-through (packed bed or fluidized bed) electrode are modeled by means of a one-dimensional model involving a primary reacting species and a simultaneous side reaction. The model equations are solved by orthogonal collocation; the time and storage requirements compare favorably to those of finite-difference methods. Experimental data obtained using a packed-bed electrode are compared with the model predictions and various methods of fitting the data are compared.     

Upgrading coal-derived liquids to diesel fuel

Distilled fractions of a coal-derived liquid from the H-Coal process were upgraded to diesel fuel by catalytic hydrotreatment. The total hydrotreated products were distilled into naphtha (<180°C) and diesel fuel fractions (>180°C) and the diesel fractions were analysed for hydrocarbon-type composition, hydrogen content and some diesel fuel properties. GC—MS-analyses were carried out on the hydrocarbon-type fractions to identify individual chemical compounds. To investigate the effect of different distillation cut points on diesel fuel yield and properties, cut points for one hydrotreated product were varied. The diesel fuel cetane numbers were correlated with percentage hydrogen, total aromatics and saturates. Cetane numbers above 40 were obtained for diesel fuels containing (i) more than 75% saturates, (ii) less than 15% total aromatics and (iii) a hydrogen content above 12.8%. Compounds identified by GC—MS-analyses (in the diesel fractions) were typical aromatic and cycloparaffin compounds. Normal-and iso-paraffin compounds were not detected. By varying the distillation cut point from 135 to 180°C, the cetane number of the residual diesel fraction improved from 37 to 44. This increase is ascribed to the removal of aromatic compounds in the 135–180°C boiling point range.     

Dynamics of hydrated iron(II) cations in nafion polymer membranes

Mössbauer studies of Fe²⁺ in water-soaked nafion polymer membranes in the temperature range between 90 K and 250 K have been performed. Above a critical temperature (～ 180 K) the spectra exhibit both elastic narrow absorption lines and quasielastic broad lines. These spectra are typical of bounded diffusion phenomena observed by Mössbauer spectroscopy in macromolecular systems like haemoglobin, myoglobin and ferritin. Similar spectral shapes have been observed by quasielastic neutron scattering from water in nafion membranes. Within 50 K above the critical temperature the total Mössbauer absorption area decreases by an order of magnitude whereas the narrow absorption line decreases by two orders of magnitude. The results are interpreted in terms of bounded diffusive motion of the iron. Using a model based on overdamped harmonically bound Brownian motion, the essential parameters of the iron motion can be derived as a function of temperature. The iron motion most probably reflects the motion of a large Fe²⁺ complex, e.g. Fe(H₂O)²⁺₆, which is attached to the polymer side chains via the sulphonic group.     

The heater test at the Grimsel Rock Laboratory: The thermo-mechanical response of the rock mass to a heat flux

The Grimsel Test Site (Felslabor Grimsel — FLG) is situated at a depth of 450 m in the Juchlistock massif of the Bernese Oberland. It is managed by the National Cooperative for the Storage of Radioactive Waste (NAGRA-Switzerland).By means of a heater test, the power output of canisters filled with high-level waste is simulated. This heater test is performed by the German Gesellschaft für Strahlen- und Umweltforschung — GSF. Two electrical heaters, with a heatable length of 6 m, a diameter of 0.3 m and an available power of 4 kW/m, are installed in two vertical boreholes. One of them is located in the granite adjacent to a strongly fractured lamprophyre vein, the other one directly within this disturbed zone. They are operating since August 1986.The thermo-mechanical reaction of the rock mass is registered by a large number of measurement devices which are installed in an array of instrument boreholes around the heaters. They record the deformation and the alteration of rock stresses, the pore water pressure and the water conductivity caused by heating.     

Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator     

Scrubbing Hydrogen Sulfide from Gases. A Rational Approach

Worsening of the environmental situation in many regions of Russia in recent decades is to a great degree due to production and refining of oil and gas with a high hydrogen sulfide content. Industrial methods of utilization of hydrogen sulfide are extremely irrational: it is either burned in flares or used for production of sulfur whose quality and quantity pose new problems related to its use.