Application of model predictive control strategy based on fuzzy identification to an SP-100 space reactor

In this work, a model predictive control method combined with fuzzy identification, is applied to the design of the thermoelectric (TE) power control in the SP-100 space reactor. The future TE power is predicted by using the fuzzy model identified by a subtractive clustering method of a fast and robust algorithm. The objectives of the proposed fuzzy model predictive controller are to minimize both the difference between the predicted TE power and the desired power, and the variation of control drum angle that adjusts the control reactivity. Also, the objectives are subject to maximum and minimum control drum angle and maximum drum angle variation speed. The genetic algorithm that is effective in accomplishing multiple objectives is used to optimize the fuzzy model predictive controller. A lumped parameter simulation model of the SP-100 nuclear space reactor is used to verify the proposed controller. The results of numerical simulations to check the performance of the proposed controller show that the TE generator power level controlled by the proposed controller could track the target power level effectively, satisfying all control constraints.     

基于WebGIS的粗泥沙集中来源区电子地图系统研究

基于WebGIS的粗泥沙集中来源区电子地图系统建设，以粗泥沙集中来源区作为研究区域，以黄河中游粗泥沙集中来源区水土保持工作流程（包括规划设计、计划管理、综合治理、预防监督和淤地坝管理等）为主线，依托黄河流域水土保持生态与环境监测系统网络、黄河流域水土保持监测系统数据库，建立覆盖黄河流域、黄土高原区、多沙粗沙区、粗泥沙集中来源区，面向不同水土保持管理层的水土保持监测与管理信息系统。     

蒸发式空冷器的运行实践

通过了解蒸发式空冷器的工作原理和结构,在运行实践过程中,对组成设备出现的问题提出相应的解决方案,并对部分组成设备提出改进的建议,以方便检修和维护,并提出了在冬季长时间高炉休风情况下保证水温不下降过低的解决方案。     

海水注入开发中剩余油饱和度评价研究

剩余油饱和度评价是油田水淹层测井评价中的重点和难点。当油田发生水淹后,储层的润湿性、地层水电阻率都将发生较大的变化,因此剩余油饱和度评价所需的处理参数必须重新确定。以南中国海某河流相沉积油田的储层在水淹后的剩余油饱和度评价中的关键参数研究为例,通过模拟油藏条件下的岩电实验和地层混合水矿化度与实际含水率的关系,研究探索求取剩余油饱和度评价关键参数的有效方法,应用中与实际生产符合较好,为此类开发油田的剩余油饱和度的精确评价奠定了基础。     

在线安全预警和决策支持系统的软件构架与实现

安全预警和决策支持（EWSC）系统作为未来控制中心自动化系统的重要功能，一方面需要对能量管理系统（EMS）成熟功能进行封装，另一方面需要适应自动化系统功能演变的需要。提出了一种基于多代理系统（MAS）的软件开发范式，用于开发EWSC系统的软件构架。该系统具有一个松散、开放的可插入式结构。其中核心框架是负责系统通信和任务调度的协调层，是相对固定的;其余部分为独立模块，由一系列相对独立的决策分析和人机表达智能体组成，可以独立开发，方便地嵌入系统。在该框架下系统各个模块层次分明，具有很强的解耦性，并且可以实现把历史遗留系统集成到新的环境中。基于文中所提出的软件构架的在线EWSC系统已在某省级电网投运。     

New concept of surface modification to LiCoO2

As the continuance of our series study on LiCoO₂ surface modification, the complicated traditional surface coating method is replaced with simple addition of amorphous YPO₄ and Al₂O₃ in commercial LiCoO₂ or in commercial electrolyte based on our understanding to the improvement mechanism of surface modification. Comprehensive studies by X-ray photoelectron spectroscopy (XPS), gas chromatography and mass spectroscopy (GC–MS), inductively coupled plasma (ICP) and Fourier transformed infrared (FTIR) indicate that the products of spontaneous reaction between the additive and the LiPF₆ based electrolyte are responsible for the performance improvements.     

浅谈气泡混合轻质土的特点及应用

结合高速公路的发展,分析了气泡混合轻质土的设计机理,详细地介绍了气泡混合轻质土的工程特性,阐述了气泡混合轻质土在公路建设中的应用,最后对气泡混合轻质土的应用前景进行了展望。     

部分可渗透直立圆柱的消波作用研究

本文导出了线性波浪作用于上部可渗透的直立刚性圆柱体上的水动力的解析解。在线性有势流的假定下，用特征函数展开方法求出了内部和外部流场的解。给出了不同波浪要素及结构尺寸参数下的数值结果。由结果可知，提高可渗透性可以有效消减波幅。     

Evaluation of Morphology—Stable Critical Size of KNbO3 Crystals

Skeletal form of KnbO3 crystals growing in Li2B4O7 solvent was in-situ observed at 900℃ and it was found that shallow depression started to develop on the surface of KnbO3 crystals when the crystal size exceeded several micron,typically 7 micron.Based on the quantitative criterion derived by Chernov,the estimated critical size of KNbO3 crystals was 1 micron,which was consistent with the experimental measurement.The kinetic coefficients,Kcorner and Kcr,in the criterion were experimentally obtained in the diffusive-convective and diffusive-advective flow states respectively.     

对氧化物熔体浮区中重力对流的数值模拟

利用有限元分析方法数值模拟了界面形状对氧化物高温熔体碟形浮区中的温度分布和重力对流速率的影响，发现界面形状对重力对流速率有较大的影响，对于凸面，相对于炉圈平面5％的偏离使重力对流速率增大25％，偏离越大，重力对流速度越大，对于凹面，5％的偏离使重力对流速率减小15．7％，偏离越大，重力对流速度越小。