雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。     

Synthesis, characteristics and oxygen-sensitive properties of SrMgxTi 1 − xO3 nanocrystals

SrMg_xTi_{1 - x}O₃ nanocrystals (x = 0.1–0.6) were synthesized by the stearic acid gel method. Powder samples were characterized by X-ray diffraction and X-ray photoelectron (XP) spectroscopy. The results showed that the lattice parameter a and the O 1s XP spectrum changed not only with the Mg content x but also with the grain size d of the samples. The conductivity of a thick film specimen fabricated on an aluminium oxide wafer was investigated in a nitrogen—oxygen atmosphere.     

采样定理的内在不自洽性和工程应用的局限性——采样定理和奈奎斯特准则研究·上篇

推导证明了作为通信理论基石之一的采样定理及其公式存在着两个矛盾：内在不自洽性，即采样定理与其公式的推导前提条件相矛盾；采样定理在工程实际应用时的严重局限性     

一种制备插层和无定形高岭土的新方法

利用甲醇钠强烈的夺氢作用 ,介绍了一种制备插层和无定形高岭土的方法。利用XRD为主要检测手段研究了甲醇钠的质量分数、反应温度等因素对反应的影响。结果表明 :在反应温度较低、质量分数较低的甲醇钠溶液中 ,高岭土容易被插层而膨胀 ,反之高岭土的层状结构被破坏而无定形化。红外光谱分析进一步证明了插层和无定形高岭土结构的变化     

产品数据管理系统数据库设计

工程数据库EDB（Engineering Database），是工程设计及制造领域中相互有关的数据所组成的集合，本文在详细分析工程数据库的特点及其实现方式的基础上，结合SF－PDM数据库设计，深入讨论了使用UML进行数据库概念设计和逻辑设计的方法与步骤，总结介绍了SF－PDM数据库物理设计的思路与相关实现过程。     

In—situ Composite Based on Poly （ethylene terephthalate）,Polyamide and Polyethylene with Microfibres Formed through Extrusion and Hot Stretching

In-situ composites based on dispersed poly (ethylene terephthalate) (PET) or polyamide (PA),and continuous Polyethylene (PE) were prepared through a single screw extruder of Haake rheometer system with a rod-die relatively small in diameter.The extrudate was drawn at a drawing ratio of 3.1,and then quickly cooled in cold water.The specimens were obtained by injection molding at processing temperatures less than 190℃，far below the melting temperature of PET (265℃) and PA (230℃),which can maintain the solid state of PET and PA microfiber phase in the composites.Morphological observation with scanning electron microscopy (SEM) indicated that PET and PA can more or less form in-situ microfibers at compositions studied (0-20 wt pct PET or PA),and especially,PET and PA were almost deformed into fibers at the concentration of 15wt pct.Eensile strength and especially.PET and PA were almost deformed into fibers at the concentration of 15wt pct.Tensile strength and modulus of the blends reinforced by PET or PA microfibers showed to be increased from the tensile test results.The most noticeable improvement of the tensile properties occurred at 15wt pct of PET in PET/PE system,corresponding to the highest microfiber content,where the tensile strength reached 32.5 MPa,whereas only 19.5 MPa for the pure PE.     

现场总线技术在发电系统数据采集中的应用

介绍了现场总线网络在干熄焦汽轮机发电生产过程中所起的作用，并重点介绍了系统所完成的数据采集，监视和管理等功能。     

基于图像灰度统计分布的高炉温度场动态定标算法

通过高炉红外图像建立料面温度场是判断高炉煤气流分布形态的一种有效方法,温度定标是建立温度场的基本问题之一.在高炉复杂、恶劣的环境下,本文以高炉十字测温为基础,通过热电偶温度数据和图像对应区域的灰度分布统计,动态地建立温度定标关系.算法具有较好的自适应性,实际生产运行表明,温度定标关系较好地适应了高炉炉况的不确定性,准确地反映了高炉温度场的变化情况.     

用记录型信号量解决读者-写者问题

讨论了用记录型信号量解决读者-写者问题的算法,并对算法作了进一步改进.