以人为本的儿童医院候诊设施及服务系统的构建原则初探——以无锡儿童医院输液候诊区为例

旅游发展既促进了江南水乡传统建筑景观的保护,又对其产生了消极影响。旅游的消极影响表现在旅游容量对水乡建筑环境的压力,旅游的商业化、低俗化对建文章从以人为本(HCD)的设计理念出发,结合服务设计中接触点的分析方法,以无锡儿童医院输液候诊区为例,进行服务流程失败点的分析。提出以设计介入儿童医院候诊设施及服务系统构建的四大原则,旨在提升国内儿童医院候诊效率和服务水平,为新医疗服务模式提供案例参考。     

试谈计算机软件测试管理的应用

计算机的软件测试是软件工程构成部分之一,同时软件测试也是检验软件开发人员及软件产品是否合格的重要凭据。就软件测试管理系统活动及应用两个方面的内容进行研究,并对管理工具的存在进行简单的介绍。     

涂料剖析

简要分析了不同涂料体系分析程序,说明了每种涂料剖析体系中应该注意的事项。     

企业各软件的数据共享和整合分析浅谈

本文主要根据大多数企业存在各种软件各自独立运行,各软件之间数据不能相互共享,一些旧软件或不适用的软件与目前主流操作系统不兼容等问题,分析问题并用接口和整合方法解决,此平台利用云计算技术,解决大多数企业建设信息平台投资大的问题,同时方便企业使用和维护.     

Low-Temperature Dielectric Properties of Ceramic Potassium Tantalate (KTaO3)

Dielectric properties of KTaO₃ ceramic fabricated by both conventional sintering and sintering followed by isostatic hot pressing (HIP) were measured at T =4.2 to 300 K over a frequency range from 400 Hz to 4 MHz. The weak field response shows a faint peak near 10 K which has a clear relaxation character, as in high-purity single crystals. The general response is well reproduced by the Barrett function, but additional polarizability with relaxation character is also in evidence at higher temperatures. No dielectric hysteresis was observed at high fields for cycling frequencies down to 0.04 Hz anywhere in the temperature range.     

Direct synthesis of electrorheological suspension containing salt of poly(methacrylic acid) and its electrorheological effect

Colloidal suspensions containing salts of poly(methacrylic acid) which exhibit high electrorheological (ER) activity were synthesized by inverse emulsion polymerization. Factors influencing the ER effect were studied. The results showed that maximum yield stress occurred at optimum amounts of both polymeric stabilizer and crosslinking agent used in the inverse emulsion polymerization as well as a certain water content of the particles, while yield stress increased with electric field strength, average diameter of the particles below 0.9 μm, or the molar ratio of the salt to the acid. The ER activity for the suspensions containing different monovalent counter ions decreased in the following order: Li⁺ > Na⁺ > K⁺ > NH₄⁺. The phenomena were discussed with the ionic polarization mechanism. © 1995 John Wiley & Sons, Inc.     

纳米稀土复合固体超强酸催化合成乙酸苄酯

采用共沉淀法制备了纳米稀土复合固体超强酸SO4^2-／ZrO2-2％Nd2O3催化剂，电镜分析表明，催化剂颗粒直径在25nm左右，比表面积测定：71．03m^2／g。酸强度-12．70〈Ho〈-11．99。并对合成乙酸苄酯的最佳反应条件进行了研究。研究表明：当苯甲醇与乙酸的物质的量比为1：2，反应时间为5h，反应温度为120℃，催化剂用量为6％苯甲醇的质量时，酯化率可达92．04％。研究发现，该催化剂可重复使用并可活化再生。     

金纳米线拉伸行为的分子动力学模拟

采用分子动力学方法模拟了不同截面尺寸金纳米线的拉伸力学行为。计算结果表明:相同长度的金纳米线弹性模量随着截面尺寸的减小而减小,而其屈服强度随着截面尺寸的减小而增大,并且发生屈服推迟现象。应力—应变曲线与形变过程相对应。在弹性变形阶段,纳米线形变不显著;随着应变量的增加,发现纳米线出现大量堆垛层错。     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

Influence of Zn ion implantation on structures and field emission properties of multi-walled carbon nanotube arrays

The structures and field emission properties of multi-walled carbon nanotube arrays implanted with Zn+ by MEVVA ion implanter have been investigated.The results revealed that Zn+implantation induced structural damage and that the top of carbon nanotubes with multi-layered graphite structure were transformed into carbon nanowires with amorphous structure.Meanwhile,C:Zn solid solution was synthesized after Zn+ implantation.The turn-on field and threshold field were 0.80 and 1.31 V/μm,respectively for original...