变频器的常见故障分析

本文阐述了变频器的常见故障，并针对常见故障提出了解决措施。     

6to4与ISATAP技术相结合的IPv6网络实现

在IPv4向IPv6过渡期间,多种过渡技术可以互相支持、互相组合使用,以达到互利互助。简要介绍了其中2种隧道技术:6to4技术和ISATAP技术,提出了1种基于两者结合的新型实验网络的实现方案。具体讨论了在Linux下如何组建这种新型实验网络平台,详细阐明了如何配置IPv6主机以及双栈路由器,为IPv4过渡到IPv6提供1个可行的方案。     

LCD图形控制器中图形加速引擎BitBLT的VLSI设计

BitBLT引擎具有加速图形移动,支持位块数据的光栅操作(ROP)和透明传输,支持文本、单色位图和图样的由单色向全彩的快速转等功能.在小尺寸LCD图形处理芯片中,BitBLT引擎的设计需要仔细地权衡速度、功耗和面积等相互制约的因素.本文对图形加速引擎BitBLT的功能和结构进行了分析,给出了电路的实现,并对设计中如何提高处理速度和优化功耗进行了讨论,最后给出仿真及FPGA验证结果.     

非织造布印花技术探讨

介绍了应用于非织造布印花的技术及工艺，对非织造布印花时应注意的事项进行了说明。     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

机械制造企业信息化讲座第十二讲企业信息化工程监理

2003年中国机械工业联合会根据对166家机械制造企业调查,CAD应用的深度仍有很大局限,相当一部分企业停留在出图上;从制造企业整体情况看,MRPⅡ/ERP的应用还不广泛,即便已开始应用,与现代企业管理模式还有脱节,成功率还不够高;CIMS应用未取得预期效果;投入产出比不理想,没有发挥应有的作用.     

Effect of fiber types on relevant properties of porous asphalt

The research was conducted to evaluate the effects of cellulose and polyester fibers on the properties of porous asphalt mixes, using the tests of draindown, abrasion, volumetric properties, rutting, and moisture damage. Images of scanning electron microscopy and X-ray computerized tomography were adopted to identify the microstructure of the fiber and inner stone skeleton of porous asphalt. The influence of rutting parameter （G＊/sin δ） of asphalt modified by different fibers on the rutting resistance of the mixes was investigated. Based upon MOHR-COULOMB theory, the cohesion and the angle of internal friction of the mixes were derived from both indirect tension and unconfined compression strength. The experimental results indicate that fibers mainly stabilize asphalt binder and thicken asphalt film around aggregates. Furthermore, they result in the improved mechanical strength of porous asphalt mixes at high temperature slightly. From comparison analysis, cellulose fibers appear to perform better than polyester fibers in porous asphalt mixes.     

塔巴庙区块气层录井参数分析研究

塔巴庙区块气藏属于低压、低渗气藏,储集层物性差异大、含气级别高,但含气非均质性强,录井解释评价困难。针对这一问题,开展了综合判断储集层物性和含气性方面的研究,分别探讨了钻时与全烃、钻井液性能与全烃、钻井液粘度与全烃、气测显示与测井参数和烃组分与气显示之间的关系,分析了其相关性及其在塔巴庙区块气层解释评价中的意义及作用。通过相关性研究,不但摸索出定性解释评价气层的方法,同时为今后深入研究录井相关参数关系,探索其内在规律,为实现准确解释评价储集层奠定了基础。     

后热处理对新型马氏体耐热钢焊缝性能的影响

针对电力施工过程中对具有冷裂倾向的马氏体型耐热钢焊后后热处理时机选择与标准存在差异，即是否必要在冷却至100-120℃恒温一段时间后再进行后热处理的问题，安排了一系列的试验对后热处理的最佳时机予以讨论，对热处理后的焊缝组织进行力学性能试验和金相分析，对冲击后的试样进行了断口分析。试验证明，后热处理时机的不同对马氏体耐热钢焊缝冲击韧度有比较大的影响，马氏体耐热钢的后热处理应在马氏体转变完全后开始较为合适。