A GPC method to determine the composition of two component copolymers

Summary The hydrolytic degradation of Kevlar 49 fibers when dissolved in H₂SO₄ is characterized from (i) Fourier transform infrared (FTIR), CNH analyses and optical microscopy studies of insoluble crystals formed in the PPTA-H₂SO₄ dope and (ii) the rates of H₂SO₄-catalyzed hydrolysis of model compound aromatic amides. After hydrolysis of a PPTA amide linkage, the amide linkage adjacent to the freshly formed-COOH macromolecular end group rapidly hydrolyses resulting in the formation of terephthalic acid which then forms insoluble crystals in the PPTA-H₂SO₄ dope.Dedicated to Professor Dragutin Fle on the occasion of his 70th birthdaySupported in part by U.S. Department of Energy, LL National Laboratory under Contract W-7405-Eng-48     

Decreasing the Sampling Time Interval in Radioactive Particle Tracking

The study of the movement of solids in multiphase reactors using radioactive particle tracking is currently limited to fairly modest particle velocities because of count‐rate limitations of the detection system. In this work, this restriction was overcome by increasing the activity of the radioactive tracer, by decreasing the sampling time interval and by modifying the particle tracking software to recognize which detectors were saturated and to use only the data from the remaining unsaturated detectors. Higher tracer activity resulted in lower standard deviation of the calculated tracer coordinates.     

Methanogenesis of black liquor in a two‐stage biphasic reactor system using an immobilized cell system

The methanogenesis of black liquor from pulp and paper mill was achieved using immobilized cell technology in a laboratory‐scale two‐stage reactor system run continuously for 340 days. The optimum organic loading rate for the anaerobic treatment of black liquor was 8.0 kgm^?3d^?1 at which the % COD removal, biogas production and methane content were 55%, 11 dm³d^?1 and 71%, respectively. Organic loading rates above 8.0 kgm^?3d^?1 were observed to be toxic to the methanogenic bacteria and resulted in decreased methane content, biogas and COD removal. The applicability of the system to the large‐scale processing and treatment of paper mill liquid waste is discussed. © 2001 Society of Chemical Industry     

Gas-Phase Flame Synthesis and Characterization of Iron Oxide Nanoparticles for Use in a Health Effects Study

Iron oxide nanoparticles, to be used in a health effects study, were synthesized in a H₂/air diffusion flame and characterized by transmission electron microscopy, X-ray diffraction, surface area measurement, inductively coupled plasma mass spectrometry, and a spectrophotometric speciation method. The nanoparticles exhibited the maghemite (γ -Fe₂O₃) crystal structure and contained only trivalent iron. There were two size modes in the particles. The large size mode contained crystalline, non-agglomerated particles with a median diameter of approximately 45 nm; the small size mode contained particles that were in the size range of 3–8 nm and were mostly amorphous. Depending on the value taken for the small particle size, the small mode accounted for 73–82% of the particle surface area. The particles in the small size mode were likely formed from the vapor of FeO and Fe.     

The Speciation and Morphology of Chromium Oxide Nanoparticles in a Diffusion Flame

The impact of combustion conditions on the formation of chromium oxide aerosol has been studied in a hydrogen diffusion flame seeded with Cr(CO)₆ vapor. Specifically, the effects of the precursor concentration, the flame temperature and the flame residence time on properties of the postflame chromium oxide aerosol were investigated. Each of these flame parameters was found to affect the particle size distribution and/or particle morphology. These effects were partially associated with the fact that the chromium speciation in the final flame products was sensitive to the precursor concentration and the flame temperature. The flame residence time was found to affect the crystallinity of the Cr(III) particles in the postflame chromium oxide aerosol. Conversion of Cr(III) particles to Cr(VI) in the high temperature zone of the flame was proposed to explain changes in the particle size distribution, composition, and morphology. The proposed mechanism was able to explain the experimental findings satisfactorily.     

Analysis of dichotomous outcome data for community intervention studies

Community intervention trials are becoming increasingly popular as a tool for evaluating the effectiveness of health education and intervention strategies. Typically, units such as households, schools, towns, counties, are randomized to receive either intervention or control, then outcomes are measured on individuals within each of the units of randomization. It is well recognized that the design and analysis of such studies must account for the clustering of subjects within the units of randomization. Furthermore, there are usually both subject level and cluster level covariates that must be considered in the modelling process. While suitable methods are available for continuous outcomes, data analysis is more complicated when dichotomous outcomes are measured on each subject. This paper will compare and contrast several of the available methods that can be applied in such settings, including random effects models, generalized estimating equations and methods based on the calculation of 'design effects', as implemented in the computer package SUDAAN. For completeness, the paper will also compare these methods of analysis with more simplistic approaches based on the summary statistics. All the methods will be applied to a case study based on an adolescent anti-smoking intervention in Australia. The paper concludes with some general discussion and recommendations for routine design and analysis.     

Making programme learning outcomes explicit for students of process and chemical engineering

There is a global shift in education from solely content-driven teaching to teaching that takes learning outcomes into account. This movement underpins much of the educational reform in the area of engineering education. Programme learning outcomes for degrees in engineering education are more commonplace as more and more professional accrediting bodies require fulfillment or compliance with prescribed learning outcomes. However, the students may not be presented with these learning outcomes as they are often “hidden” in documentation submitted by institutions for accreditation purposes and hence may not be divulged to students. Undergraduate students (2006–2008) taking the BE degree programme in Process & Chemical Engineering at UCC were first surveyed to assess their level of knowledge of the learning outcomes concept and of the degree programme learning outcomes. The contents of two documents used in applications for accreditation by professional accreditation bodies as well as professional Institution guidelines were reviewed to formulate the degree programme learning outcomes which were presented to the students. These students were then surveyed after the presentation. The results of the questionnaire completed by students demonstrated a major improvement in their knowledge of both the concept of learning outcomes and also of the degree programme learning outcomes. It also showed that the students found the session to be of overall beneficial value.     

Optimization of PACl dose to reduce RO cleaning in an IMS

In order to ensure stable treated water quality and to reduce chemical costs in any treatment plant it is necessary to study and optimize the coagulant dosing control (CDC). This research focused on the affects of coagulant in the integrated membrane (UF & RO) system employed for industrial water production. The dose of coagulant (PACl) might be associated (partly) with the frequency of cleaning in the RO units, and a value of 20 abs/m in the UF permeate is the control of the dosage process. This could suggest that organic fouling is directly and indirectly (inducing biofouling as well) the cause of fouling of the RO membranes. Nevertheless, high doses of PACl could produce scaling of aluminium and, in this work minimizing PACl to prevent operational problems in RO membranes was focused.

The approach involved the study of the treatment processes, determination of the optimum dose of coagulant, evaluation of the removal efficiency of UV and DOC by coagulation. The available data, which comprised monthly/weekly measurements for a period of six years of operation, was studied and analyzed and an attempt was made to draw some conclusions for the plant regarding the coagulant dosage and the link with UV absorbance as control.

The study of the coagulant dosing control revealed that the use of simple and robust online sensors like UV measurement allows an automatic dosing control although this parameter is not found to be sufficient to fully characterize nor predict fouling during membrane operation and there is no link between UV after the UF and the cleaning frequency of the RO. Parameters, as the added value allowed to verify the doses efficiencies in UV and DOC removal. Coagulant dose depends on the level of UV absorbance in the UF permeate and it should never be higher than 20 abs/m to ensure a RO cleaning frequency as long as possible. However, it was found that the target value of 20 abs/m produced substantial over dose of coagulant — 90% of the time – when UV removal is considered only. In the same way, for coagulant doses in excess of 5 mg/L, the additional removal of UV is less than 2.5% per mg coagulant/L, which suggests that the current dose is on the high side.

Furthermore, a coagulant dose in excess of 5 mg/L did not produce significant additional UV removal, and thus a reduction from 14 mg/L (2005 dose) to ca. 7 mg/L could be considered.     

The degradation of electrochemically polymerised poly (3-aminophenol) films in sodium hydroxide solutions for the production of microelectrode ensembles

Poly (3-aminophenol) films have been grown electrochemically from solutions of 3-aminophenol at pH 7. These pinhole free films passivate the electrode surface and are less than 10 nm thick. The films are stable in 1 M solutions of sulphuric acid. However, they are rapidly degraded in solutions of sodium hydroxide. It is demonstrated that initially the polymer removal results in the creation of an electrode that exhibits the characteristics of a microelectrode ensemble. However, as further polymer is removed these characteristics are lost and response of the electrode resembles that of a large planar electrode. This chemical treatment of poly (3-aminophenol) films allows for the cost-effective production of microelectrode ensembles.     

Reaction in Al-Ti-C powders and its relation to the formation and stability of TiC in Al at high temperatures

By heating Al, Ti and C powders in a DSC and by observing and analysing the microstructures produced, it has been found that, for Ti and C concentrations, equivalent to those observed in metal matrix composites, TiC forms from Al₃Ti and Al₄C₃ above 890°C. Microstructural evidence suggests that the formation of TiC occurs by reaction between Ti dissolved in Al and Al₄C₃ through the dissolution of Al₃Ti. It is, therefore, reasonable to assume that TiC particles react in Al below 890°C to form Al₃Ti and Al₄C₃.