Combination of interference alignment and beamforming in cellular networks

In this paper, we propose two joint transmit-receive iterative algorithms without the cooperation between different base stations based on the idea of interference alignment (IA) to improve the throughput of relay backhaul links in cellular networks for the case of imperfect channel knowledge,which can be implemented with small changes to existing TD-LTE standards. Unlike the previous interference alignment algorithms’ only reducing the sum interference to the other receivers at the transmitter or the sum received Multi-user interference (MUI) at the receiver, our algorithm shapes the transmission of each data stream at transmitters in order not only to minimize interference to the other users, but also to minimize the interference between different streams objected to the same user, suppressing the MUI and Multi-stream interference (MSI) at receivers. The proposed algorithm I is to maximize the SINR at receivers. But the complexity is relatively high. Algorithm II only needs linear operations and sacrifices a little performance for much lower complexity compared to the Maximize SINR iterative algorithm which needs the inversion operation of matrix. It is also proved that the algorithm converges monotonically. The simulation results show that the techniques have considerable performance gain compared with the previous algorithms. Further research about power allocation is also discussed.     

高放废液中^126Sn的放化分析

以甲基异丁基酮(MIBK)萃取为主要步骤,放化分离高放废液中的~(126)Sn。全流程化学回收率约为60%。以SnO_2形式制成测量源,用HPGe γ谱仪测取γ谱图,由~(126)Sn的子体特征γ能峰面积,经化学回收率、探测效率校正后,计算得到高放废液中~(126)Sn的含量为371±29 Bq/ml。~(126)Sn的放射性活度约为高放废液总活度的4×10~(-7)。     

短路电流对电网结构的影响

分析了发电机接入不同电压等级提供的短路电流、500 kV变电站之间220 kV侧短路电流的相互影响,并以湖北武汉电网为例,进行了理论分析及潮流仿真计算,在此基础上分析了短路电流对电网结构的影响.     

湖北电网输电线路大负荷试验研究

在2007年夏季负荷高峰期间对湖北省电力公司的两条220kV卡口线路高楼线、郭楼线进行了大负荷考核试验,验证了提高线路输送能力理论研究的结果,同时积累了宝贵的经验,可以在今后类似的试验中加以推广。     

BEPC试验束数据获取系统改进及离线数据分析

运行在BEPC电子直线加速器上的试验束,主要利用在线探测器和离线数据分析选择单粒子事例,满足多种单粒子束流试验.本文介绍了试验束改进后的数据获取系统,以及离线数据分析中的飞行时间谱分析,单粒子判选和粒子击中位置定位等.     

快速高准确度的闪烁探测技术

闪烁探测器具有探测效率高和适于多种条件下应用等优点。但在高计数率测量时,光电倍增管出现的疲劳现象难以克服,其长期稳定性也较差。 本文提出一种措施,使闪烁探测器在每秒10~5个计数脉冲下获得了高的精度和好的稳定性。这项技术已经应用于FT-1型核子低含沙量计中。经测试表明,当每次测量历时为100秒时该仪器的计数精度和8小时长期     

环氧树脂浇注35 kV干式变压器局部放电量的查找及排除

变压器局部放电不但能产生高速离子对绝缘材料的表面直接破坏;同时还产生臭氧和氮的氧化物,前者使绝缘材料裂解,后者与潮气结合生成硝酸对绝缘材料进行腐蚀。而干式变压器的绝缘又具有不可恢复性,因此其局部放电量更加受到生产厂家和用户的重视,绝大多数厂家都把局部放电试验作为出厂试验。但引起局部放电的原因较多,而许多生产厂家限于现有测试设备的原因,有时很难判断出现局部放电的具体位置,给排除局部放电带来一定的难度。本文列举许继变压器有限公司的局部放电试验实例,并分析其试验过程,供读者参考。1局部放电试验实测该变压器为SCB…     

Study on the Grain Refinement of an Al-Zn-Mg-Cu Alloy Prepared by LFEC Process

Low frequency electromagnetic casting(LFEC)process has been developed for years with the application of an induction coil outside the conventional direct chill(DC)casting mould.It has been demonstrated that the LFEC process has a significant grain refining effect on aluminium alloys.However,how it refines the microstructure is still not clearly understood.In the present work,the temperature measurement were carried out to study the temperature field during casting and to understand the mechanism of the grain refining effect of the LFEC process.The results showed that in contrast to the conventional DC casting process,during the LFEC process,the liquid melt flowing from the launder into the mould is cooled with very high cooling rate directly to 3-6℃below the liquidus and the temperature field of the entire melt in the mould and the hot top is quite uniform,which results in enhanced heterogeneous nucleation and improved survival rate of the nuclei.This is believed to be the main reason why the LFEC process can significantly refine the grain size of aluminium alloys.     

连铸用浸入式水口的进展及展望

介绍了浸入式水口的结构和发展及其本质的发展历史过程,着重介绍了不同时期不同材质浸入式水口的优缺点,并对浸入式水口的发展趋势进行了分析.     

混凝剂对污泥膨胀影响的实验研究

利用一体式膜生物实验反应器,通过静态和动态实验,并结合考察化学需氧量(COD)和氨氮(NH4+-N)等参数,先后研究了在不同pH值条件下,硫酸铝、氯化铁和改性淀粉混凝剂及助凝剂PAM等物质对污泥膨胀的控制效果.结果表明,在静态条件下,氯化铁对污泥膨胀的控制效果最好,氯化铁的质量浓度达到120 mg.L-1之后,活性污泥的沉降比SV(Settling Velocity)可以稳定在91%左右。动态实验表明,投加混合药剂使出水中NH4+-N的质量浓度可由平均11.09 mg.L-1下降至1.77 mg.L-1,出水中COD由平均18.14 mg.L-1下降至14.4 mg.L-1.研究表明,通过添加混凝剂可以控制污泥膨胀的发生,并可以提高污水处理效率.