Crystallization processes and phase evolution in amorphous Fe–Pt–Nb–B alloys

Fe–Pt system is nowadays widely studied due to its potential applications as magnetic recording media. The hard magnetic FePt L1₀ phase has extremely promising potential as permanent magnet with high magnetocrystalline anisotropy. Of recent interest is also the developing of the hard magnetic phase from an amorphous precursor by appropriate crystallization processes. The melt-spun amorphous Fe₆₈Pt₁₃Nb₂B₁₇ alloy has been submitted to dynamical annealing and its phase transformation during the process has been monitored by differential scanning calorimetry and in situ energy-dispersive X-ray diffraction of the synchrotron radiation. In the first stage of crystallization, -Fe and cubic FePt phases are formed from the amorphous precursor. At around 600 °C superlattice Bragg reflections corresponding to tetragonal FePt are indexed in the XRD spectra and -Fe phase diminishes drastically. Finally, between 900 °C and 975 °C the tetragonal superlattice peaks disappear and cubic FePt phase is formed again. This reversible order–disorder transformation is accompanied by a strong uniaxial lattice expansion of the cubic FePt unit cell. The system show promising features for the co-existence of hard and soft exchange coupled magnetic phases crystallized from FePt-based amorphous precursors.     

Potential of selected infant food formulas for production of Bacillus cereus emetic toxin, cereulide

Cereulide producing Bacillus cereus was isolated from randomly chosen commercial infant foods. The cereulide production in infant food formulas was investigated. When the reconstituted foods were inoculated with >10(5) cfu ml(-1) of cereulide producing B. cereus, 2 to 200 microg of cereulide per 100 ml of food accumulated during 24 h of non-refrigerated storage. The amount of cereulide measured in the foods by the accurate chemical assay (LC-MS) matched with that found by sperm micro assay, proving the cereulide was the sole heat stable toxin in the foods and present in its toxic form. The infant formulas containing both cereal and dairy ingredients were the most supportive for cereulide production. Cereulide accumulation was affected by the infant food composition as well as by the handling of the food. Diluting the reconstituted food with water resulted in increased toxin production expressed as mug per volume. More cereulide was accumulated when the food was incubated stationary compared with moderate shaking. The amount of cereulide accumulated within 24 h at room temperature per 100 ml of cereal and dairy or in rice-nondairy reconstituted infant formulas, inoculated with >or=10(5) cfu ml(-1) of B. cereus strain F4810/72, was higher or similar to the amounts reported for foods implicated in emetic type of food poisonings. Thus mishandling and temperature abuse of infant foods may cause food poisoning when emetic B. cereus is present.     

Porous indium oxide thin films deposited by electrostatic spray deposition technique

This paper presents the preparation process of porous indium oxide (In₂O₃) films using a novel deposition technique, i.e., electrostatic spray deposition (ESD). The films were deposited on platinum-coated alumina substrates using as precursor solution indium chloride in ethanol and acetic acid. The films were characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and Raman spectroscopy. The nanocrystalline structure of the films was evidenced by TEM and also by XRD studies. The Raman spectroscopy and XRD measurements revealed the cubic phase of In₂O₃ films. Considering the obtained results, we conclude that the ESD technique is an efficient, cheap and successful method for the preparation of porous indium oxide films.     

X-ray micro- fluorescence, diffraction and absorption spectroscopy for local structure investigation of a radioactive zinc ferrite deposit

X-ray micro- fluorescence (μXRF), diffraction (μXRD) and absorption spectroscopy (μXAS) techniques have been used to investigate the micro-crystalline and chemical structure of a radioactive zinc ferrite corrosion deposit phase formed on a zirconium dioxide substrate. Micro- fluorescence provides structural information based on the elemental distribution analysis, μXRD allows the determination of lattice parameters of crystalline compounds while μXAS yields data related to the atomic environment, such as coordination number and the distances to the nearest neighbours. The μXAS and the μXRD results are compared including a discussion of precision and accuracy of both techniques.     

Tungsten trioxide thin films prepared by electrostatic spray deposition technique

Tungsten trioxide (WO₃) thin films deposited on a Pt-coated alumina substrate using the electrostatic spray deposition (ESD) technique is reported in this paper. As precursor solution, tungsten (VI) ethoxide in ethanol was used. The morphology and the microstructure of the films were studied using scanning electron microscopy coupled with energy dispersive X-ray analysis, transmission electron microscopy, X-ray diffraction, and Raman spectroscopy. Dense to porous morphologies were obtained by tuning the deposition temperature. Impedance spectroscopy and current-voltage measurements were used to study the electrical behaviour of the films in air, in temperature range 300-500 °C. The activation energy was estimated from Arrhenius plots. Considering the obtained results, the ESD technique proved to be an effective technique for the fabrication of porous tungsten trioxide thin films.     

Mobile ad hoc network broadcasting: A multi‐criteria approach

Nodes in a computer network often require a copy of a message to be delivered to every node in the network. The network layer can provide such a service, referred to as network‐wide broadcast routing or simply ‘broadcasting’. Broadcasting has many applications, including its role as a service to many routing protocols. In a mobile ad hoc network (MANET), simplistic broadcast schemes (such as flooding) inundate the network with redundancy, contention, collision, and unnecessary use of energy resources. This can prevent broadcasts from achieving their primary objective of maximizing delivery ratio, while also considering secondary objectives, such as balancing energy resources or reducing the network's burden on congested or busy nodes. As a solution, we propose multiple‐criteria broadcasting (MCB). In MCB, the source of each broadcast specifies the importance assigned to broadcast objectives. Network nodes use these priorities, along with local and neighbor knowledge of distributed factors, to broadcast in accordance with the objective priorities attributed to the message. Using ns2, the performance of MCB is evaluated and compared to that of other broadcast protocols. To present knowledge, MCB constitutes the first reconfigurable, multi‐objective approach to broadcasting. Copyright © 2010 John Wiley & Sons, Ltd.     

Computationally Efficient Formulation of Sparse Color Image Recovery in the JPEG Compressed Domain

Sparse representations provide a powerful framework for various image processing tasks, among which image recovery seems to be an already classical application. While most developments of image recovery applications are focused on finding the best dictionary, the possibility of using already existing sparse image representations tends to be ignored. This is the case of the JPEG compressed image representation, which is a sparse image representation in terms of the discrete cosine transform (DCT) dictionary. The development of sparse frameworks directly on the JPEG encoded image representation can lead to computationally efficient approaches. Here we introduce a DCT-based JPEG compressed domain formulation of the color image recovery process within a sparse representation framework and we prove mathematically and experimentally not only its numerical efficiency as compared to the pixel level formulation (the processing time is reduced up to 40 %), but also the good quality of the restoration results.     

Semi conducting properties amd microstructure of x%V2O5·(100−x)% (As2O3·B203) glasses

Binary semiconducting glasses of the x%V₂O₅·(100?x)%(As₂O₃· B₂O₃) system with x ranging from 50 to 70 mol% have been investigated to elucidate their electronic conduction and microstructure. The values of conductivity and activation energy obtained for these glasses are in agreement with previous results on most V₂O₅-based glasses. Arguments for a small-polaron conduction of nonadiabatic type are presented. All the samples show a glass-glass type phase separation.     

Styrene–divinylbenzene copolymers: Influence of the diluent on network porosity

The formation of the permanent porosity in the classical matrix, styrene–divinylbenzene copolymers, using cyclohexane, cyclohexanol, or cyclohexanone as diluent was studied. The data concerning porous networks were corroborated with the solvent–polymer interaction factor and the cohesive energy density which are important in the prediction of copolymer porosity. Between diluents there are noticeable differences, though the diluent volume and the divinylbenzene percent strongly influence the porous structure of the network. Cyclohexanal was the most efficient diluent for building up the highest porosity even at low percents of divinylbenzene.