Ultra-dense planar metallic nanowire arrays with extremely large anisotropic optical and magnetic properties

A nanofabrication method for the production of ultra-dense planar metallic nanowire arrays scalable to wafer-size is presented. The method is based on an efficient template deposition process to grow diverse metallic nanowire arrays with extreme regularity in only two steps. First, III–V semiconductor substrates are irradiated by a low-energy ion beam at an elevated temperature, forming a highly ordered nanogroove pattern by a “reverse epitaxy” process due to self-assembly of surface vacancies. Second, diverse metallic nanowire arrays (Au, Fe, Ni, Co, FeAl alloy) are fabricated on these III–V templates by deposition at a glancing incidence angle. This method allows for the fabrication of metallic nanowire arrays with periodicities down to 45 nm scaled up to wafer-size fabrication. As typical noble and magnetic metals, the Au and Fe nanowire arrays produced here exhibited large anisotropic optical and magnetic properties, respectively. The excitation of localized surface plasmon resonances (LSPRs) of the Au nanowire arrays resulted in a high electric field enhancement, which was used to detect phthalocyanine (CoPc) in surface-enhanced Raman scattering (SERS). Furthermore, the Fe nanowire arrays showed a very high in-plane magnetic anisotropy of approximately 412 mT, which may be the largest in-plane magnetic anisotropy field yet reported that is solely induced via shape anisotropy within the plane of a thin film.

Open image in new window

     

Negative regulation by interleukin-3 (IL-3) of mouse early B-cell progenitors and stem cells in culture: transduction of the negative signals by betac and betaIL-3 proteins of IL-3 receptor and absence of negative regulation by granulocyte-macrophage colony-stimulating factor

The receptors for interleukin-3 (IL-3), granulocyte-macrophage colony-stimulating factor (GM-CSF), and IL-5 share a common signaling subunit betac. However, in the mouse, there is an additional IL-3 signaling protein, betaIL-3, which is specific for IL-3. We have previously reported that IL-3 abrogates the lymphoid potentials of murine lymphohematopoietic progenitors and the reconstituting ability of hematopoietic stem cells. We used bone marrow cells from betac- and betaIL-3-knock-out mice to examine the relative contributions of the receptor proteins to the negative regulation by IL-3. First, we tested the effects of IL-3 on lymphohematopoietic progenitors by using lineage-negative (Lin-) marrow cells of 5-fluorouracil (5-FU)-treated mice in the two-step methylcellulose culture we reported previously. Addition of IL-3 to the combination of steel factor (SF, c-kit ligand) and IL-11 abrogated the B-lymphoid potential of the marrow cells of both types of knock-out mice as well as wild-type mice. Next, we investigated the effects of IL-3 on in vitro expansion of the hematopoietic stem cells. We cultured Lin-Sca-1-positive, c-kit-positive marrow cells from 5-FU-treated mice in suspension in the presence of SF and IL-11 with or without IL-3 for 7 days and tested the reconstituting ability of the cultured cells by transplanting the cells into lethally irradiated Ly-5 congenic mice together with "compromised" marrow cells. Presence of IL-3 in culture abrogated the reconstituting ability of the cells from both types of knock-out mice and the wild-type mice. In contrast, addition of GM-CSF to the suspension culture abrogated neither B-cell potential nor reconstituting abilities of the cultured cells of wild-type mice. These observations may have implications in the choice of cytokines for use in in vitro expansion of human hematopoietic stem cells and progenitors.     

Removal of partial occlusion from single images

This paper examines large partial occlusions in an image which occur near depth discontinuities when the foreground object is severely out of focus. We model these partial occlusions using matting, with the alpha value determined by the convolution of the blur kernel with a pinhole projection of the occluder. The main contribution is a method for removing the image contribution of the foreground occluder in regions of partial occlusion, which improves the visibility of the background scene. The method consists of three steps. First, the region of complete occlusion is estimated using a curve evolution method. Second, the alpha value at each pixel in the partly occluded region is estimated. Third, the intensity contribution of the foreground occluder is removed in regions of partial occlusion. Experiments demonstrate the method's ability to remove the effects of partial occlusion in single images with minimal user input.     

A New Algorithm for Finding Trees with Many Leaves

We present an algorithm that finds out-trees and out-branchings with at least k leaves in directed graphs. These problems are known as Directed Maximum Leaf Out-Tree and Directed Maximum Leaf Out-Branching, respectively, and—in the case of undirected graphs—as Maximum Leaf Spanning Tree. The run time of our algorithm is O(4 ^k nm) on directed graphs and O(poly(n)+4 ^k k ²) on undirected graphs. This improves over the previously fastest algorithms for these problems with run times of 2 ^O(klog k) poly(n) and O(poly(n)+6.75 ^k poly(k)) respectively.     

Convergence analysis of geometrical multigrid methods for solving data-sparse boundary element equations

The convergence analysis of multigrid methods for boundary element equations arising from negative-order pseudo-differential operators is quite different from the usual finite element multigrid analysis for elliptic partial differential equations. In this paper, we study the convergence of geometrical multigrid methods for solving large-scale, data-sparse boundary element equations. In particular, we investigate multigrid methods for \(\mathcal{H}\)-matrices arising from the adaptive cross approximation to the single layer potential operator.     

De Haas-van Alphen effect study of magnetic interaction in lead

Frequency and amplitude modulation (FM and AM) of a high-frequency (HF) de Haas-van Alphen oscillation due to magnetic interaction (MI) with a low-frequency (LF) oscillation in lead has been examined for field directions parallel to and close to 110, in the light of the old and of a new treatment of MI based on uniform and inhomogeneous inductions over the sample, respectively. The de Haas-van Alphen signals have been measured by the standard low-frequency field modulation method. The strength of AM and the sideband around HF have been examined as a function of the strength of FM and it is found that the experimental data deviate significantly from the prediction by the old treatment. Moreover, the deviation depends not only on the particular sample chosen to study, but also on the orientation, suggesting that the MI effect is influenced by the microscopic inhomogeneity of the sample. The absolute amplitude of LF also has been measured and is found again to deviate significantly from the prediction by the old treatment. However, the measured amplitude shows a satisfactory agreement with the prediction by the new treatment. In conclusion, the new treatment is a plausible theory which can describe all our experimental results, not only qualitatively but also quantitatively.     

Dynamic alternation of primate response properties during trial-and-error knowledge updating

Humans and animals seek appropriate solutions to novel problems through trial-and-error (TE) actions and observation of their outcomes. Once an individual has obtained the knowledge (rule) to solve a problem, knowledge-based (KB) actions may be applied in a stereotypical manner. Solutions can thus be based on TE or KB actions. To characterize this learning process at the behavioral level, we developed a new cognitive task for a laboratory monkey (Macaca fuscata) to perform. In this task, a search array consisting of six elements of different colors was presented, one of which was the behaviorally relevant target. The target color was changed unpredictably with no instruction or signal, requiring the monkey to use a TE search strategy to find the target color. We found that once the monkey identified the relevant color by chance after a color change, correct performance increased in a step-like manner and at the same time, other response properties (reaction time and color-choice tendency) also changed discontinuously. These step-like alternations in behavioral performance may be attributed to the subject’s switching between TE and KB search strategies in the two phases. The present study has therefore provided behavioral evidence for the timing and manner of switching between search strategies during the process of updating knowledge.     

Colorimetric microdetermination of sulphites in foods by use of the modified rankine apparatus. IV.

Summary Detection and determination of traces of sulphites in foods was attempted by use of the modified Rankine apparatus and pararosaniline colorimetry. Replacement of alkaline titration reported previously by pararosaniline colorimetry lowered the absolute detection limit from 30 g (titration method) to 2 g. In view of clean analysis, in the color developing system, 0.1 N-sodium hydroxide was used in place of mercuric chloride solution commonly used as an absorbant of sulphites. In order to prevent oxidative decomposition of sulphites during operation, nitrogen gas was used as carrier instead of air. Dimedone and sodium azide were used for the elimination of aldehydes and nitrites, respecitvely, in the sample, which will disturb the color development of sulphites with pararosaniline-formaldehyde reagents. With this improved method, it was possible to determine the residual sulphites in frozen peeled shrimps, sugared beans and other foods with low sulphite contents accurately.

---

Colorimetrische Mikrobestimmung von Sulfiten in Lebensmitteln bei Anwendung der modifizierten IV. Rankine Apparatur

Zusammenfassung Geringe Sulfitmengen in Lebensmitteln (geschälte Garnelen, gezuckerte Bohnen) können colorimetrisch bestimmt werden. Die neuentwickelte Methode beruht auf einer Kombination von colorimetrischer Bestimmung mittels p-Rosanilin und der Bestimmungsmethode nach Rankine. Auf diese Weise lassen sich Gehalte von 2 g noch genau bestimmen. Bei der Farbentwicklung wurde das giftige Quecksilbertetrachlorid durch 0.1 n-NaOH ersetzt, anstelle von Luft Stickstoff als Trägergas verwendet und somit eine Oxydation des Sulfits während der Bestimmung vermieden. Da Nitrit und Aldehyde die Farbentwicklung stören, wurde ihr Einfluß durch Dimedon und Natriumazid ausgeschaltet.

---

---

Studies on the Analyses of Sulphites in Foods (IV)     

Comparison of land surface emissivity and radiometric temperature derived from MODIS and ASTER sensors

This study compared surface emissivity and radiometric temperature retrievals derived from data collected with the MODerate resolution Imaging Spectroradiometer (MODIS) and Advanced Spaceborne Thermal Emission Reflection Radiometer (ASTER) sensors, onboard the NASA's Earth Observation System (EOS)-TERRA satellite. Two study sites were selected: a semi-arid area located in northern Chihuahuan desert, USA, and a Savannah landscape located in central Africa. Atmospheric corrections were performed using the MODTRAN 4 atmospheric radiative transfer code along with atmospheric profiles generated by the National Center for Environmental Predictions (NCEP). Atmospheric radiative properties were derived from MODTRAN 4 calculations according to the sensor swaths, which yielded different strategies from one sensor to the other. The MODIS estimates were then computed using a designed Temperature-Independent Spectral Indices of Emissivity (TISIE) method. The ASTER estimates were derived using the Temperature Emissivity Separation (TES) algorithm. The MODIS and ASTER radiometric temperature retrievals were in good agreement when the atmospheric corrections were similar, with differences lower than 0.9 K. The emissivity estimates were compared for MODIS/ASTER matching bands at 8.5 and 11 μm. It was shown that the retrievals agreed well, with RMSD ranging from 0.005 to 0.015, and biases ranging from −0.01 to 0.005. At 8.5 μm, the ranges of emissivities from both sensors were very similar. At 11 μm, however, the ranges of MODIS values were broader than those of the ASTER estimates. The larger MODIS values were ascribed to the gray body problem of the TES algorithm, whereas the lower MODIS values were not consistent with field references. Finally, we assessed the combined effects of spatial variability and sensor resolution. It was shown that for the study areas we considered, these effects were not critical.