A comprehensive evaluation of energy storage options for better sustainability

Due to ever increasing global energy demand and the limited nature of fossil fuel reserves, there has been tremendous research and development studies in the literature, focusing on alternative and clean energy resources and systems. Renewables are the promising choice when it comes to addressing some critical energy issues such as climate change and energy security. However, renewables have intermittent and discontinuous supplies; hence, they need to be stored in ways that are affordable, reliable, flexible, clean, safe, and efficient. As a result, energy storage is becoming a crucial step to build innovative energy systems for a sustainable future. Energy can be stored in many forms, from electrical to chemical (eg, hydrogen), or electrochemical, thermal, electromagnetic, etc. Each form consists of different technologies, some of which are already commercially mature while others are at early research and development stages. Each of these options can be tailored to meet different end users' needs at different scales. Therefore, this study aims to conduct a comprehensive review on the most recent status of energy storage options, along with the requirements of various end users, and characteristics of smart energy storage systems. The main objective is to summarize the performance evaluation statuses of mechanical, electrochemical, chemical, thermal, and electromagnetic energy storage technologies. The selected performance measures are capacity flexibility, energy arbitrage, system balancing, congestion management, environmental impact, and power quality. In the end, some key recommendations and future directions for energy storage systems are provided.     

Sorption and Preconcentration of Vanadium,Chromium, Manganese,and Lead on Silica Gel Modified with (3‐Mercaptopropyl) Trimethoxysilane

Abstract

3‐mercaptopropyltrimethoxysilane, (CH₃O)₃SiCH₂CH₂CH₂SH, loaded on silica gel was used as a preconcentration sorbent for V, Cr, Mn and Pb prior to their determination by graphite furnace atomic absorption spetrometry (GFAAS). Surface characteristics and surface area of the silica gel before and after chemical modification were determined by elemental analysis. The retention and recovery of the analyte elements were studied by applying batch and column techniques. The experimental parameters, such as the effect of pH of the sample, shaking time in batch technique, flow rate of the eluent, the concentration of acid solution in the column section, and the amount of silica on retention and elution have been investigated. All elements were quantitatively (≥90%) recovered in the batch technique with R.S.D. values of 3.0 for vanadium, 1.8 for chromium, 1.7 for manganese, and 0.4 for lead. The same recoveries were obtained in the column techniques for all elements, while manganese in sea water could not be succesfully recovered. Detection limits of the method for vanadium, chromium, manganese, and lead are 1.1, 1.4, 1.3, and 0.8 ng, respectively.     

THERMAL AND MASS DIFFUSIVITY FROM DYNAMIC SINGLE PELLET EXPERIMENTS

The single-pellet moment techniques previously developed for the evaluation of effective diffusion coefficient and effective thermal conductivity of a porous solid are combined and a procedure is proposed for the simultaneous evaluation of these constants from a single set of pulse response experiments. It is shown that both temperature and concentration response curves can be measured from a single pulse of oxygen injected into hydrogen carrier gas flowing past a catalyst pellet. It is shown that the zeroth moment of the concentration response peaks are sufficient for finding the effective diffusivity while both zeroth and first order moments are required for thermal conductivity. Experiments conducted at 110^°C with a boehmite pellet of porosity 0.57 gave a thermal conductivity value of 3.6 x 10^-4 cal/cm ^°K s and an effective diffusivity (for H₂O) of 0.054 cm2/s. The adsorption equilibrium constant of H₂O was determined as ρ_pK = 24.5 from the first moment data. If sorption resistance to diffusion through the pellet is included in the diffusion coefficient, an apparent value of 0.0011 cm2/s would be obtained for D_eff. This result indicates the importance of separation of diffusion and sorption parameters in the analysis.     

Preparation and characterization of ciprofloxacin‐loaded alginate/chitosan sponge as a wound dressing material

The aim of this study is preparation and characterization of alginate/chitosan sponges including a model antibiotic (i.e., ciprofloxacin) to use in wound and/or burn treatment. Sponges were prepared firstly by the gelation of sodium alginate followed by lyophilization, crosslinking with calcium chloride, and finally coating with chitosan. Sponges were characterized with respect to morphology, water uptake, in vitro drug release behavior, and antimicrobial activity. Investigated and evaluated parameters in all of these studies were selected as the concentration of calcium chloride, alginate viscosity, drug content, and molecular weight of chitosan. Drug release and water uptake were found to be greatly influenced by these parameters. Water uptake and drug release rate were decreased by increasing the crosslinking density, chitosan molecular weight, and alginate viscosity. In the antimicrobial tests, it was obtained that the antimicrobial activity is directly proportional with the release rates and water uptake. Morphological studies showed a highly porous structure with interconnected pores. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1602–1609, 2006     

Effective diffusion constant and adsorption constant of synthesized alumina,zirconia, and alumina–zirconia composite material

In this study, Al₂O₃, ZrO₂, and Al₂O₃–ZrO₂ composite materials were prepared with the sol–gel technique. X-ray diffraction analysis, differential scanning calorimetry–thermogravimetry, scanning electron microscopy–energy-dispersive X-ray spectrometry, nitrogen adsorption isotherm measurements, and helium pycnometry were used to characterize the resultant materials. Effective diffusion coefficients of helium and hydrogen and the adsorption equilibrium constant of hydrogen in the resultant materials were determined using single-pellet moment technique. The effective diffusivities of helium and hydrogen in both ZrO₂ and Al₂O₃–ZrO₂ composite pellets were found to be smaller than the value found for Al₂O_3, due to the lower tortuosity factor values of the Al₂O₃ pellet. It was found that hydrogen was weakly adsorbed on all resultant materials.     

Effects of humidity and soil organic matter on the sorption of chlorinated methanes in synthetic humic-clay complexes.

Vapor-phase sorption is the most influential process governing the transport and the fate of volatile organic compounds in soil. To understand the influence of both soil organic content and the humidity of soil on the vapor sorption is an important process for degradation processes. The single-pellet moment technique was used to investigate sorption and diffusion of trichloromethane (TCM) and carbon tetrachloride (CTC) at varying relative humidities (0-80%) of synthetic humic-clay complex pellets consisting of clay (montmorillonite) and different amounts of organic matter (humic acid). The effective diffusivities of TCM and CTC did not show a noticeable change with moisture and humic acid content. On the other hand, with increasing humic acid content of clay at 0% relative humidity, an appreciable decrease of the equilibrium sorption constants of the tracers (TCM, CTC) was found because of the blockage of some sites of the mineral surfaces and especially micropores by the humic acid. The presence of water also reduced dramatically the sorption of TCM and CTC on synthetic humic-clay complexes. Above 20% relative humidity, the sorption coefficient of TCM and CTC varied only slightly with humic acid content. It was concluded that the sorption of TCM and CTC in synthetic humic-clay complexes was strongly effected by the moisture and humic acid content.     

Road to Metastasis: The TWEAK Pathway as a Discriminant between Metastasizing and Non-Metastasizing Thick Melanomas

Cutaneous melanoma (CM) is the most aggressive form of skin cancer, and its worldwide incidence is rapidly increasing. Early stages can be successfully treated by surgery, but once metastasis has occurred, the prognosis is poor. However, some 5–10% of thick (≥2 mm) melanomas do not follow this scenario and run an unpredictable course. Little is known about the factors that contribute to metastasis in some patient with thick melanomas and the lack thereof in thick melanoma patients who never develop metastatic disease. We were therefore interested to study differential gene expression and pathway analysis and compare non-metastatic and metastatic thick melanomas. We found that the TNF-like weak inducer of apoptosis (TWEAK) pathway was upregulated in thick non-metastasizing melanomas. MAP3K14 (NIK1), BIRC2 (cIAP1), RIPK1, CASP7, CASP8, and TNF play an important role in inhibiting proliferation and invasion of tumor cells via the activation of the non-canonical NF-κB signaling pathway. In particular, this pathway sensitizes melanoma cells to TNF-alpha and activates the apoptosis module of the TWEAK pathway in thick non-metastasizing melanomas. Hence, our study suggests a potential role of the TWEAK pathway in inhibiting thick melanoma from metastasis. Exploitation of these genes and the pathway they control may open future therapeutic avenues.     

Bona Fide Tumor Suppressor Genes Hypermethylated in Melanoma: A Narrative Review

Loss-of-function events in tumor suppressor genes (TSGs) contribute to the development and progression of cutaneous malignant melanoma (CMM). Epigenetic alterations are the major mechanisms of TSG inactivation, in particular, silencing by promoter CpG-island hypermethylation. TSGs are valuable tools in diagnosis and prognosis and, possibly, in future targeted therapy. The aim of this narrative review is to outline bona fide TSGs affected by promoter CpG-island hypermethylation and their functional role in the progression of CMM. We conducted a systematic literature review to identify studies providing evidence of bona fide TSGs by cell line or animal experiments. We performed a broad first search and a gene-specific second search, supplemented by reference checking. We included studies describing bona fide TSGs in CMM with promoter CpG-island hypermethylation in which inactivating mechanisms were reported. We extracted data about protein role, pathway, experiments conducted to meet the bona fide criteria and hallmarks of cancer acquired by TSG inactivation. A total of 24 studies were included, describing 24 bona fide TSGs silenced by promoter CpG-island hypermethylation in CMM. Their effect on cell proliferation, apoptosis, growth, senescence, angiogenesis, migration, invasion or metastasis is also described. These data give further insight into the role of TSGs in the progression of CMM.