The effect of na and Sr modification on surface tension and volumetric shrinkage of A356 alloy and their influence on porosity formation

Modification of the eutectic Si in Al-Si foundry alloys by adding strontium or sodium is, unfortunately, accompanied by an increase of porosity in the casting. In an attempt to understand the nature of this problem, this study used a sessile-drop method to investigate the effect of Sr and Na on surface tension and volumetric shrinkage, two probable causes of porosity occur-rence. The addition of 0.01 wt pct Sr and 0.005 wt pct Na to A356 alloy decreases the surface tension of the liquid by about 19 and 10 pct, respectively, and may increase the volume shrink-age by about 12 pct. These changes to surface tension and volumetric shrinkage promote the early formation of the pores during solidification and give the availability of a longer period of growth prior to complete solidification, resulting in a larger pore size. The effect of surface tension on the pores is more significant than volumetric shrinkage. Although the predicted pore diameter increases with lower surface tension or higher volumetric shrinkage, these two effects alone do not seem able to completely account for the observed increase in porosity that is associated with modification.     

Neural networks and blood cell identification

The objective of this project is to propose a method of identifying cells found in human blood and to classify them based upon their morphological features using neural networks. The project focuses on three major blood cell types, namely, erythrocytes, leukocytes and platelets. The data are collected using peripheral blood smears from clinical patients. The image acquisition requires 100x magnification on all the blood smears, the preprocessing involves the use of median and edge enhance filters; the feature extraction is done by performing the wavelet transform on the images. Finally classification of the blood cell types is done using ALOPEX and Back Propagation trained neural networks. The efficacy of both networks is then compared by comparing their outputs and number of iterations required to reach the final result.     

Anatomically constrained electrical impedance tomography forthree-dimensional anisotropic bodies

As shown previously for two-dimensional geometries, anisotropy effects should not be ignored in electrical impedance tomography (EIT) and structural information is important for the reconstruction of anisotropic conductivities. Here, we describe the static reconstruction of an anisotropic conductivity distribution for the more realistic three-dimensional (3-D) case. Boundaries between different conductivity regions are anatomically constrained using magnetic resonance imaging (MRI) data. The values of the conductivities are then determined using gradient-type-algorithms in a nonlinear-indirect approach. At each iteration, the forward problem is solved by the finite element method. The approach is used to reconstruct the 3-D conductivity profile of a canine torso. Both computational performance and simulated reconstruction results are presented together with a detailed study on the sensitivity of the prediction error with respect to different parameters. In particular, the use of an intracavity catheter to better extract interior conductivities is demonstrated     

Nuclear waste management in the US: The Nuclear Waste Technical Review Board's perspective

The US program for the management and disposal of commercial spent nuclear fuel and high level waste is in a period of potential programmatic, regulatory, and legislative change. Proposals currently being considered by the US Congress would authorize the development of a storage facility as soon as possible adjacent to the potential repository site at Yucca Mountain. The legislation also would establish regulatory requirements for a permanent repository at an individual dose limit of 1 mSv year⁻¹ (100 mrem year⁻¹) for the average person living near the repository. Concurrently, the fiscal year 1996 appropriation to characterize the Yucca Mountain site has been reduced by approximately 40%. These initiatives portend possible changes in the focus of the US program, including a fundamental shift in priority from permanent disposal to temporary storage, and a change in the approach to licensing a potential repository at the Yucca Mountain site. This paper provides the perspective of the members of the Nuclear Waste Technical Review Board on the impact these developments could have on the future of the US program. It discusses the Board's opinion on how to address the issues these and other developments raise in a way which moves the US civilian radioactive waste management program forward.     

Synthesis and characterization of molybdenum disulphide formed from ammonium tetrathiomolybdate

An investigation has been carried out into the possibility of in situ formation of MoS2 within porous anodic films on aluminium, to improve subsequent tribological behaviour, by re-anodizing in thiomolybdate electrolyte. Acidification of thiomolybdate was employed to simulate the conditions for formation of the sulphide at the anodic film/electrolyte interface, followed by appropriate vacuum heat treatments to study possible temperature effects on the sulphide due to either friction or Joule heating during anodizing. The products of both acidification and heat treatment, characterized by X-ray powder diffraction and scanning electron microscopy, were compared with those formed by direct thermal decomposition of ammonium tetrathiomolybdate crystals. The precipitate formed by acidification was mainly amorphous molybdenum trisulphide (MoS3), which on heat treatment at 450 and 850°C yielded 3R-MoS2. 3R-MoS2 also formed by the thermal decomposition of thiomolybdate crystals. Thermogravimetric and differential thermal analyses showed that the decomposition of MoS3 to MoS2 occurred in the range 220–370°C and revealed the sequence of reaction steps. The findings suggest that mainly amorphous MoS3 is formed as a consequence of changes in the pH of the film/electrolyte interface during re-anodizing but the product is relatively easily transformed to crystalline MoS2 on moderate heating which may occur during wear processes.     

Developmental and light-dependent changes of the cytosolic chaperonin containing TCP-1 (CCT) subunits in maize seedlings, and the localization in coleoptiles

The cytosolic chaperonin containing TCP-1 (CCT) is known to keep fold cytoskeletal proteins and is involved in the proper organization of the cytoskeleton. These studies are based on the assumption that growth responses linked to structural rearrangement of the plant cytoskeleton include the action of CCT and the need for newly synthesized tubulin. The presence of the alpha- and epsilon-subunits of CCT was investigated in soluble fractions of protein extracts from maize mesocotyls and coleoptiles at distinct growth stages. The CCT-subunits, tubulins and actin decreased in the coleoptile in response to far-red light. In addition, independent from light treatment, the amount of CCT epsilon abundance declined with age in coleoptiles and mesocotyls between 2 and 4.5 days after sowing. In contrast to CCT epsilon, no significant light regulation of CCT alpha was found in the mesocotyl. In two day old, light-grown rapidly elongating coleoptiles part of the CCT alpha subunit and the bulk of actin and tubulin was found shifted into fractions of high molecular weight complexes when compared to slowly elongating, dark grown coleoptiles. In 4.5 day old, etiolated and elongating coleoptiles, part of both CCT-subunits and cytoskeleton proteins were found in fractions of high molecular weight. A complete disappearance of these polypeptides was observed in old far-red irradiated growth-arrested coleoptiles. CCT epsilon was found to be colocalized to microtubular structures and to the nucleus. We conclude from our data that abundance of CCT-subunits in soluble extracts is dependent on age and light treatment, but independent from the growth stage of mesocotyl and coleoptile.     

Structural allograft in two-stage revisions for failed septic hip arthroplasty

We report 11 patients having revision of total hip arthroplasty using massive structural allografts for failure due to sepsis and associated bone loss. All patients had a two-stage reconstruction and the mean follow-up was 47.8 months (24 to 72). Positive cultures were obtained at the first stage in nine of the 11 patients, with Staphylococcus epidermidis being the most common organism. The other two patients had draining sinuses with negative cultures. There was no recurrence of infection in any patient. The mean increase in the modified Harris hip score was 45 and all the grafts appeared to have united to host bone. Two patients required additional procedures, but only one was related to the allograft. Complications included an incomplete sciatic nerve palsy and one case of graft resorption. Our results support the use of massive allografts in failed septic hip arthroplasty in which there is associated bone loss.     

Tomsk complex for neutron-transmutation doping of silicon

All-Union Scientific-Research Institute of Nuclear Physics at the S. M. Kirov Tomsk Polytechnical University. Translated from Atomnaya énergiya, Vol. 79, No. 1, pp. 38–40, July, 1995.