Treatment of Critical Size Femoral Bone Defects with Biomimetic Hybrid Scaffolds of 3D Plotted Calcium Phosphate Cement and Mineralized Collagen Matrix

To treat critical-size bone defects, composite materials and tissue-engineered bone grafts play important roles in bone repair materials. The purpose of this study was to investigate the bone regenerative potential of hybrid scaffolds consisting of macroporous calcium phosphate cement (CPC) and microporous mineralized collagen matrix (MCM). Hybrid scaffolds were synthetized by 3D plotting CPC and then filling with MCM (MCM-CPC group) and implanted into a 5 mm critical size femoral defect in rats. Defects left empty (control group) as well as defects treated with scaffolds made of CPC only (CPC group) and MCM only (MCM group) served as controls. Eight weeks after surgery, micro-computed tomography scans and histological analysis were performed to analyze the newly formed bone, the degree of defect healing and the activity of osteoclasts. Mechanical stability was tested by 3-point-bending of the explanted femora. Compared with the other groups, more newly formed bone was found within MCM-CPC scaffolds. The new bone tissue had a clamp-like structure which was fully connected to the hybrid scaffolds and thereby enhanced the biomechanical strength. Together, the biomimetic hybrid MCM-CPC scaffolds enhanced bone defect healing by improved osseointegration and their differentiated degradation provides spatial effects in the process of critical-bone defect healing.     

Isolation and molecular characterization of antibiotic-resistant lactic acid bacteria from poultry and swine meat products

The transfer via the food chain from animals to humans of microbes that are resistant to antimicrobial agents is of increasing concern. To determine the contributions of nonpathogenic microflora to the occurrence and spread of antibiotic resistance (AR) genes in the food chain, 123 lactic acid bacteria were isolated from 29 samples of raw and processed pork and chicken meat products that had previously tested positive for one or more AR genes that encode clinically relevant ARs: tet(M), tet(O), tet(K), erm(A), erm(B), erm(C), aac (6')-Ie aph (2")-Ia, mecA, and blaZ. All of the isolates were initially tested for their AR gene profiles by PCR. The 59 isolates carrying a tet, erm, or blaZ gene were taken through molecular identification, analyzed by determination of the MIC, and subjected to genetic fingerprinting. Lactococcus garvieae was the predominant species (28 isolates), followed by Lactobacillus plantarum (11 isolates) and L. salivarius (6 isolates), whereas Lactococcus lactis subsp. lactis, Lactobacillus johnsonii, L. reuteri, L. crispatus, and L. brevis were identified at lower frequencies. The tet(M) and erm(B) genes were the most frequently detected. Assessment of multiple resistances in 18 tet positive (tet+) isolates revealed that tet(M) plus erm(B) and tet(K) plus erm(B) were the most frequent AR gene patterns. Partial sequencing of the tet(M) open reading frame of three selected strains showed high sequence similarities (> 99%) with tet(M) genes previously found in human pathogens (Listeria monocytogenes and Neisseria meningitidis). Southern hybridization with plasmid profiles revealed these strains contained tet(M)-carrying plasmids.     

Modeling and biological investigations of an unusual behavior of novel synthesized acridine-based polyamine ligands in the binding of double helix and G-quadruplex DNA

Three novel 2,7-substituted acridine derivatives were designed and synthesized to investigate the effect of this functionalization on their interaction with double-stranded and G-quadruplex DNA. Detailed investigations of their ability to bind both forms of DNA were carried out by using spectrophotometric, electrophoretic, and computational approaches. The ligands in this study are characterized by an open-chain (L1) or a macrocyclic (L2, L3) framework. The aliphatic amine groups in the macrocycles are joined by ethylene (L2) or propylene chains (L3). L1 behaved similarly to the lead compound m-AMSA, efficiently intercalating into dsDNA, but stabilizing G-quadruplex structures poorly, probably due to the modest stabilization effect exerted by its protonated polyamine chains. L2 and L3, containing small polyamine macrocyclic frameworks, are known to adopt a rather bent and rigid conformation; thus they are generally expected to be sterically impeded from recognizing dsDNA according to an intercalative binding mode. This was confirmed to be true for L3. Nevertheless, we show that L2 can give rise to efficient π-π and H-bonding interactions with dsDNA. Additionally, stacking interactions allowed L2 to stabilize the G-quadruplex structure: using the human telomeric sequence, we observed the preferential induction of tetrameric G-quadruplex forms. Thus, the presence of short ethylene spacers seems to be essential for obtaining a correct match between the binding sites of L2 and the nucleobases on both DNA forms investigated. Furthermore, current modeling methodologies, including docking and MD simulations and free energy calculations, provide structural evidence of an interaction mode for L2 that is different from that of L3; this could explain the unusual stabilizing ability of the ligands (L2>L3>L1) toward G-quadruplex that was observed in this study.     

How to Valorize Peanut Shells by a Simple Thermal-Catalytic Method

Topics in Catalysis - In this work, a simple thermal-catalytic system was used to valorize peanut shells (Arachis hypogaea), the residual biomass from the peanut industry. To accomplish this...     

SEM study of the morphology of asymmetric cellulose acetate membranes produced from recycled agro-industrial residues: sugarcane bagasse and mango seeds

Cellulose, obtained both from sugarcane bagasse and mango seeds, was used for synthesizing cellulose acetate in order to produce asymmetric membranes. These were compared to membranes of commercial cellulose acetate (Rhodia). All produced membranes were asymmetric, characterized by the presence of a dense skin and a porous support. Differences regarding the morphology of the surfaces as well as of the porous support can be noticed. Scanning Electron Microscopy (SEM) showed that the morphology of the superficial layer, responsible for transport, depends on the different lignin content of the starting material and also on the viscosity average molecular weight of the cellulose acetates produced from sugarcane bagasse, mango seed, and Rhodia’s commercial cellulose acetate.     

Polymer particles with a pomegranate-like internal structure via micro-dispersive polymerization in a geometrically confined reaction space I. Experimental study

The synthesis of micron-sized polymer particles with a core-shell pomegranate-like morphology is presented. The proposed polymerization technique takes advantage of a reaction-induced micro-phase separation within a suspended organic liquid droplet containing monomer, a chemical initiator, a steric stabilizer, and a poor solvent for the polymer. With an increase in monomer conversion, the monomer droplet suspended in a continuous aqueous medium is transformed first into a micro-capsule with a thick pericellular membrane, and eventually into a polymer particle packed with 300-500 nm polymer sub-particles. The experimentally observed evolution of particle morphology indicates that the reaction pathway is strongly influenced by micro-phase separation and transport phenomena. In the first stage of polymerization, a pseudo-homogeneous polymerization takes place at the droplet surface, followed by a starved macro-dispersive polymerization in the inner region where polymer precipitates out from the solvent phase as nano-sized sub-particles.     

Identification of vivianite,an unusual blue pigment,in a sixteenth century painting and its implications

Vivianite, a blue pigment employed in the past practically only in Northern and Central Europe, but with very limited use, was identified in an early sixteenth century painting, stylistically with Flemish features, from a church in Portugal. The identification of this iron phosphate mineral was made by SEM‐EDS based on the atomic ratio between phosphorus and iron in layers of blue paint (area analysis) and in particles of these same layers (spot analysis). This painting, about which there is no document to prove its authorship, becomes the first case, known in detail, of a sixteenth century painting containing vivianite. Moreover, this find and the presence of a chalk ground, also identified, strongly support the hypothesis of being a Flemish painting.     

Two‐dimensional fluorescence as a fingerprinting tool for monitoring wastewater treatment systems

BACKGROUND: The use of two‐dimensional (2D) fluorescence for monitoring complex biological systems requires careful assessment of the effect of chemical species present, which may be fluorescent and/or may interfere with the fluorescence response of target fluorophores. Given the complexity of fluorescence data (excitation emission matrices—EEMs), the challenge is how to recover the information embedded into those EEMs that can be related quantitatively with the observed performance of the biological processes under study. RESULTS: This work shows clearly that interference effects (such as quenching and inner filter effects) occur due to the presence of multiple species in complex biological media, such as natural water matrices, wastewaters and activated sludge. A statistical multivariate analysis is proposed to recover quantitative information from 2D fluorescence data, correlating EEMs with the observed performance. A selected case study is discussed, where 2D fluorescence spectra obtained from the effluent of a membrane bioreactor were compressed using PARAFAC and successfully correlated with the effluent chemical oxygen demand, using projection to latent structures modelling. CONCLUSION: This study demonstrates the potential of using 2D fluorescence spectroscopy as a status fingerprint. Additionally, it is shown how statistical multivariate data analysis can be used to correlate EEMs with selected performance parameters for monitoring of biological systems. Copyright © 2011 Society of Chemical Industry     

Self‐welding 1‐butene/ethylene copolymers from metallocene catalysts: Structure,morphology, and mechanical properties

Samples of random copolymers consisting of 1‐butene modified with a low ethylene content (4, 5, 8% by weight) produced with metallocene catalysts were studied to elucidate the polymorphic behavior of this new class of materials and to characterize them from a structural, morphological, and mechanical point of view. The samples cooled down from the melt are in amorphous phase and crystallize in a mixture of form I and I′ or in pure form I′ with aging time, according to the C2 content. Infrared and nuclear magnetic resonance spectroscopy, X‐ray diffraction and microscopic techniques were used to follow the changes of the material with aging time and to correlate the structural and morphological behavior with the peculiar mechanical properties that differentiate the samples with increasing C2 content. The presence, in the aged samples with higher C2 content, of the pure form I′ induces the peculiar ability to self‐welding and these copolymers combine high flexibility with good elasticity and ductility and can be processed directly or used as modifying agents in polymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40119.