Reputation based selfishness prevention techniques for mobile ad-hoc networks

Mobile ad-hoc networks require nodes to cooperate in the relaying of data from source to destination. However, due to their limited resources, selfish nodes may be unwilling to forward packets, which can deteriorate the multi-hop connectivity. Different reputation-based protocols have been proposed to cope with selfishness in mobile ad-hoc networks. These protocols utilize the watchdog detection mechanism to observe the correct relaying of packets, and to compile information about potential selfish nodes. This information is used to prevent the participation of selfish nodes in the establishment of multi-hop routes. Despite its wide use, watchdog tends to overestimate the selfish behavior of nodes due to the effects of radio transmission errors or packet collisions that can be mistaken for intentional packet drops. As a result, the availability of valid multi-hop routes is reduced, and the overall performance deteriorates. This paper proposes and evaluates three detection techniques that improve the ability of selfishness prevention protocols to detect selfish nodes and to increase the number of valid routes.     

Energy harvesting with pairs of variable capacitors without control circuits

This work describes several electronic electrostatic generators that can be built using two pairs of complementary variable capacitors, in a way that dispenses control circuits for their operation. In all cases, a basic unstable generator based on an electrostatic charge multiplier is used to bias variable capacitors, and the current generated by these capacitors is then rectified and sent to the load. Experimental versions of the proposed generators were built using variable capacitors made with 3D-printing techniques, moved in a back-and-forth way by a small motor. As these generators operate at high impedance level, always with small currents, they are insensitive to the resistivity of the conductive plastic used to make the variable capacitors. Several new structures are presented, and their properties are evaluated theoretically and experimentally.     

对DRAM结构中影响良率的缺陷进行监控

与上一代设计规则相比，亚100nm设计规则DRAM的开发和制造面临着前所未有的挑战。按照新型设计概念，由于器件结构不断缩小，其外形特征的深．宽比增大，这样就给工艺控制增加了难度。因此要求寻找一种能够对带状缺陷和孔洞缺陷进行可靠检测的高深．宽比（HAR）检测方法。另外，由于缺陷尺寸接近小型特征尺寸，许多从前认为不那么严重的缺陷如今变得极具损害力。因而缺陷检测和良率控制技术的改良成为加速开发并实现批量生产的基础。     

High-throughput analysis of multispectral images of breast cancer tissue.

Statistical analysis of genetic changes within cell nuclei that are far from the primary tumor would help determine whether such changes have occurred prior to tumor invasion. To determine whether the gene amplification in cells is morphologically and/or genetically related to the primary tumor requires quantitative evaluation of a large number of cell nuclei from continuous meaningful structures such as milk-ducts, tumors, etc., located relatively far from the primary tumor. To address this issue, we have designed an integrated image analysis software system for high-throughput segmentation of nuclei. Filters such as Beltrami flow-based reaction-diffusion, directional diffusion, etc., were used to pre-process the images resulting in a better segmentation. The accurate shape of the segmented nucleus was recovered using an iterative "shrink-wrap" operation. The study of two cases of ductal carcinoma in situ in breast tissue supports the biological observation regarding the existence of a preferential intraductal invasion, and therefore a common origin, between the primary tumor and the gene amplification in the cell-nuclei lining the ductal structures in the breast.     

Technological development of Brazilian telecommunications in past decades

Brazilian telecommunications sector has undergone important modifications in the last 40 years. From a badly structured system of municipal level operators in 1960, with barely one million fixed lines to a large, nation-wide system with about 50 million fixed plus another 75 million mobile lines in 2005. This work paper reviews the institutional framework of telecommunications industrial and technological policy in Brazil in the last four decades, its results and present situation. Infrastructure and services modernisation and expansion process that happened in early 1970s were carried out at the expense of massive import of products and technology. A government strategy was, then, devised to stimulate local industrial and technological development in telecommunications, under the general guidelines of import substitution policy. Essential to this strategy was the creation of an innovation system around TELEBRÁS Research and Development Centre. This technological development model was successful while a protectionist economic policy existed. When economic and political circumstances could not anymore sustain an import substitution approach, in the 1990-decade, the model fell apart and has not been replaced by any other sectorial policy. A critical assessment is carried out, analysing the adopted actions in face of the digital technology maturing process that occurred in meantime.     

Design and realization of transparent solar modules based on luminescent solar concentrators integrating nanostructured photonic crystals

Herein, we present a prototype of a photovoltaic module that combines a luminescent solar concentrator integrating one‐dimensional photonic crystals and in‐plane CuInGaSe₂ (CIGS) solar cells. Highly uniform and wide‐area nanostructured multilayers with photonic crystal properties were deposited by a cost‐efficient and scalable liquid processing amenable to large‐scale fabrication. Their role is to both maximize light absorption in the targeted spectral range, determined by the fluorophore employed, and minimize losses caused by emission at angles within the escape cone of the planar concentrator. From a structural perspective, the porous nature of the layers facilitates the integration with the thermoplastic polymers typically used to encapsulate and seal these modules. Judicious design of the module geometry, as well as of the optical properties of the dielectric mirrors employed, allows optimizing light guiding and hence photovoltaic performance while preserving a great deal of transparency. Optimized in‐plane designs like the one herein proposed are of relevance for building integrated photovoltaics, as ease of fabrication, long‐term stability and improved performance are simultaneously achieved. © 2015 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons Ltd.     

Computer Simulations of VANETs Using Realistic City Topologies

Researchers in vehicular ad hoc networks (VANETs) commonly use simulation to test new algorithms and techniques. This is the case because of the high cost and labor involved in deploying and testing vehicles in real outdoor scenarios. However, when determining the factors that should be taken into account in these simulations, some factors such as realistic road topologies and presence of obstacles are rarely addressed. In this paper, we first evaluate the packet error rate (PER) through actual measurements in an outdoor road scenario, and deduce a close model of the PER for VANETs. Secondly, we introduce a topology-based visibility scheme such that road dimension and geometry can be accounted for, in addition to line-of-sight. We then combine these factors to determine when warning messages (i.e., messages that warn drivers of danger and hazards) are successfully received in a VANET. Through extensive simulations using different road topologies, city maps, and visibility schemes, we show these factors can impact warning message dissemination time and packet delivery rate.     

Vitamins as Active Agents for Highly Emissive and Stable Nanostructured Halide Perovskite Inks and 3D Composites Fabricated by Additive Manufacturing

The use of non-toxic and low-cost vitamins like α-tocopherol (α-TCP, vitamin E) to improve the photophysical properties and stability of perovskite nanocrystals (PNCs), through post-synthetic ligand surface passivation, is demonstrated for the first time. Especially interesting is its effect on CsPbI₃ the most unstable inorganic PNC. Adding α-TCP produces that the photoluminescence quantum yield (PLQY) of freshly prepared and aged PNCs achieves values of ≈98% and 100%, respectively. After storing 2 months under ambient air and 60% relative humidity, PLQY is maintained at 85% and 67%, respectively. α-TCP restores the PL features of aged CsPbI₃ PNCs, and mediates the radiative recombination channels by reducing surface defects. In addition, the combination of α-TCP and PNCs facilitates the chemical formulation to prepare PNCs-acrylic polymer composites processable by additive manufacturing. This enables the development of complex shaped parts with improved luminescent features and long-term stability for 4 months, which is not possible for non-modified PNCs. A PLQY ≈92% is reached in the 3D printed polymer/PNC composite, the highest value obtained for a red-emitting composite solid until now as far as it is known. The passivation shell provided by α-TCP makes that PNCs inks do not suffer any degradation process avoiding the contact with the environment and preserve their properties after reacting with polar monomers during composite polymerization.     

六大趋势引领消费电子产业突破性发展——UL在2011国际消费电子展的重点观测

2011国际消费电子展(CES,Consumer Electronics Show)突显了近年来消费电子产业的一大进展:高科技与多媒体技术的突破性应用与发展,使不同的产品类型之间的差异界线不再泾渭分明。举例来说,原有的计算机、