Method for Production of α-Alumina Whiskers via Vapor-Liquid-Solid Deposition

α-alumina (α-Al₂O₃, corundum) fibers exhibit high thermal and chemical stability, as well as good mechanical properties, even at high temperatures. Such characteristics make them good candidates for use in composites. Nevertheless, very few methods of producing α-Al₂O₃ fibers are available. In the present work, we describe a method that uses aluminum pieces deposited on SiO₂ powder, in an argon atmosphere, at temperatures in the range 1300°–1600°C. The α-Al₂O₃ fibers are obtained via vapor-liquid-solid deposition. The novel addition of nickel and cobalt (or their oxides) allows the use of temperatures >1500°C, resulting in improved fiber production. We demonstrate that the metals do not contaminate the fibers produced in this way. Finally, we also estimate the tensile strength of the Al₂O₃ fibers produced through this method.     

Enhancing thermal and dynamic-mechanical properties of epoxy reinforced by amino-functionalized microcrystalline cellulose

In this study, microcrystalline cellulose (MCC) was chemically modified with 3-(aminopropyl)triethoxysilane and added to epoxy to improve chemical, thermal and dynamic-mechanical characteristics of the composites. The composites were manufactured aided by sonication with 1.0%, 2.5%, or 5.0% wt/wt of untreated MCC or amino-functionalized MCC (MCC-Si). The epoxy/MCC-Si composites showed a decrease in the ─OH band by Fourier-transform infrared spectroscopy, and X-ray diffraction analysis indicated better dispersion. The incorporation of MCC-Si in epoxy resin decreased the heat of reaction, increased activation energy values (E_a) and pre-exponential factor (A), and did not affect thermal degradation. All conversion degree (α) versus temperature curves for the composites showed a sigmoidal shape. MCC-Si composites showed better dynamic-mechanical properties than the MCC counterparts, and the functionalization effect was evidenced in storage modulus (E') and loss modulus (E"). At 2.5% wt/wt of MCC-Si content an increase of 119% in E' at the glassy region, 127% in E' at the rubbery region and 173% in E" was observed compared to the neat resin, whereas the T_g barely changed among samples. Good adhesion between the amino-functionalized MCC and the epoxy matrix was observed at the fracture surface, evidencing that surface modification of MCC improves their chemical interaction.     

Toxicokinetics of 2,4-dihydroxy-7-methoxy-1,4-benzoxazin-3-one (DIMBOA) in the European corn borer,Ostrinia nubilalis (Hübner)

2,4-Dihydroxy-7-methoxy-1,4-benzoxazin-3-one (DIMBOA), the major hydroxamic acid present in corn, and its tritiated derivative, were prepared synthetically for use in the determination of the toxicokinetics of this insect deterrent in the European corn borer (ECB),Ostrinia nubilalis. In growth studies with DIMBOA (0, 0.05, 0.2, and 0.5 mg/g diet), the mean time to pupation and adult emergence were significantly lengthened by an increase in concentration. Pupal and adult weights, for both female and male, decreased with an increase in concentration. Increased larval and pupal mortality occurred at the highest concentration of DIMBOA. DIMBOA, at concentrations of 0.2 and 0.5 mg/g diet, resulted in a decrease in the number of egg masses produced per female, and at 0.5 mg/g diet, in a decrease in the number of eggs per egg mass. Larvae fed from the neonate stage on a diet containing 0.2 mg [³H]- + [¹H]DIMBOA/g diet showed an increase in the content of label from fourth to fifth instar, but levels declined at pupation and emergence. A large amount of the labeled compounds was excreted by the insect in the pupal case. In dose-related studies, both uptake and excretion increased with an increase in concentration of DIMBOA (0.05, 0.2, 0.4 mg/g diet), while a body burden (concentration in the tissues/concentration in the frass) of approximately 0.25 was maintained for all concentrations. At the highest dose of DIMBOA (0.4 mg/g), the ECB increased consumption, possibly to compensate for the toxic effects of the compound. In topical application studies, elimination of the labeled compound in the frass was rapid, reaching 65% by 4 hr and 88% by 48 hr. Accumulation of label in tissues other than hemolymph was low. The results show that the ECB does possess adaptive mechanisms to deal with the effects of this host-derived compound.     

Evaluation of the removal of n-butanol vapor by the poly(lactic acid)-zeolite-TiO2 composite and formation of by-products

The use of polymeric films incorporated with zeolite-TiO₂ composites associated with UV radiation can be an alternative in the removal of volatile organic compounds (VOCs) through the adsorption and photodegradation processes. This study produced poly(lactic acid) (PLA) films incorporated with 13× zeolite, TiO₂, and 13×-TiO₂ zeolite composite to remove n-butanol and evaluate the by-products generated in the process. The results showed that 13× zeolite and TiO₂ added individually or as a composite to PLA, gave the polymer matrix a significant increase in the removal capacity of n-butanol. The best performance was presented by the zeolite-TiO₂, composite, confirming a synergistic effect. However, the formation of CO and CO₂ exceeded the expected values, with the verification that the polymeric matrix underwent photodegradation action by TiO₂. The polymeric film only containing zeolite is the most suitable for the removal of VOCs, as it did not present degradation of the PLA, generating a lower concentration of by-products.     

Aramid pulp treated with imidazolium ionic liquids as a filler in rigid polyurethane bio-foams

This article reports an aramid pulp (AP) treated with two ionic liquids (IL), namely 1-n-butyl-3-methylimidazolium chloride (C₄.Cl) and 1-carboxymethyl-3-methylimidazolium chloride (HO₂C), and its use as a filler in reinforced rigid polyurethane foams (RPUF). The RPUF were incorporated with the treated AP at three weight fractions (c.a. 0.1, 0.5, and 1.0 wt%) and were produced by the free rising method. The results showed that the studied IL promoted a better interaction between the AP and the RPUF system, which increased the overall reactivity, imparting a higher cell anisotropy. This also yielded a positive effect in mechanical properties and thermal stability of the RPUF. Compared to the neat RPUF, outstanding increases of approximately 50 and 20% were achieved in compressive modulus and strength, respectively. In all, the use of IL promoted increased compatibility between matrix and reinforcement, especially that HO₂C IL.     

Bio-based sustainable films from the Algerian Opuntia ficus-indica cladodes powder: Effect of plasticizer content

The present study investigated the fabrication and characterization of bio-based sustainable films composed of a terrestrial plant raw material, namely Opuntia ficus-indica (OFI) cladodes powder (CP) and a marine seaweed derivative, namely agar (A). The effect of glycerol concentration on the properties of the casted films was evaluated at four different contents, namely 30, 40, 50 and 60 wt%. The films present UV-blocking properties, as well as moderate mechanical performance, thermal stability, and water vapor transmission rate (WVTR). The results point to an increase in thickness, elongation at break, moisture content, water solubility, and WVTR with increasing glycerol content. On the contrary, Young's modulus, tensile strength, and water contact angle decreased as glycerol concentration increased. The best combination is obtained for the film with 30% glycerol, based on an intermediate compromise between physical, mechanical, thermal, and barrier properties. All these outcomes express the potentiality of the powder obtained from grinding the OFI cladodes as raw material to produce low-cost films for the development of sustainable packaging materials.     

When a Tritrophic Interaction Goes Wrong to the Third Level: Xanthoxylin From Trees Causes the Honeybee Larval Mortality in Colonies Affected by the River Disease

The “River Disease” (RD), a disorder impacting honeybee colonies located close to waterways with abundant riparian vegetation (including Sebastiania schottiana, Euphorbiaceae), kills newly hatched larvae. Forager bees from RD-affected colonies collect honeydew excretions from Epormenis cestri (Hemiptera: Flatidae), a planthopper feeding on trees of S. schottiana. First-instar honeybee larvae fed with this honeydew died. Thus, we postulated that the nectars of RD-affected colonies had a natural toxin coming from either E. cestri or S. schottiana. An untargeted metabolomics characterization of fresh nectars extracts from colonies with and without RD allowed to pinpoint xanthoxylin as one of the chemicals present in higher amounts in nectar from RD-affected colonies than in nectars from healthy colonies. Besides, xanthoxylin was also found in the aerial parts of S. schottiana and the honeydew excreted by E. cestri feeding on this tree. A larva feeding assay where xanthoxylin-enriched diets were offered to 1^st instar larvae showed that larvae died in the same proportion as larvae did when offered enriched diets with nectars from RD-colonies. These findings demonstrate that a xenobiotic can mimic the RD syndrome in honeybee larvae and provide evidence of an interspecific flow of xanthoxylin among three trophic levels. Further, our results give information that can be considered when implementing measures to control this honeybee disease.

     

Towards Smooth Particle Methods Without Smoothing

In this article we present a new class of particle methods which aim at being accurate in the uniform norm with a minimal amount of smoothing. The crux of our approach is to compute local polynomial expansions of the characteristic flow to transport the particle shapes with improved accuracy. In the first order case the method consists of representing the transported density with linearly-transformed particles, the second order version transports quadratically-transformed particles, and so on. For practical purposes we provide discrete versions of the resulting LTP and QTP schemes that only involve pointwise evaluations of the forward characteristic flow, and we propose local indicators for the associated transport error. On a theoretical level we extend these particle schemes up to arbitrary polynomial orders and show by a rigorous analysis that for smooth flows the resulting methods converge in \(L^\infty \) without requiring remappings, extended overlapping or vanishing moments for the particles. Numerical tests using different passive transport problems demonstrate the accuracy of the proposed methods compared to basic particle schemes, and they establish their robustness with respect to the remapping period. In particular, it is shown that QTP particles can be transported without remappings on very long periods of time, without hampering the accuracy of the numerical solutions. Finally, a dynamic criterion is proposed to automatically select the time steps where the particles should be remapped. The strategy is a by-product of our error analysis, and it is validated by numerical experiments.     

On the evaluation of unsupervised outlier detection: measures,datasets, and an empirical study

The evaluation of unsupervised outlier detection algorithms is a constant challenge in data mining research. Little is known regarding the strengths and weaknesses of different standard outlier detection models, and the impact of parameter choices for these algorithms. The scarcity of appropriate benchmark datasets with ground truth annotation is a significant impediment to the evaluation of outlier methods. Even when labeled datasets are available, their suitability for the outlier detection task is typically unknown. Furthermore, the biases of commonly-used evaluation measures are not fully understood. It is thus difficult to ascertain the extent to which newly-proposed outlier detection methods improve over established methods. In this paper, we perform an extensive experimental study on the performance of a representative set of standard k nearest neighborhood-based methods for unsupervised outlier detection, across a wide variety of datasets prepared for this purpose. Based on the overall performance of the outlier detection methods, we provide a characterization of the datasets themselves, and discuss their suitability as outlier detection benchmark sets. We also examine the most commonly-used measures for comparing the performance of different methods, and suggest adaptations that are more suitable for the evaluation of outlier detection results.