Smoke gas analysis by Fourier transform infrared spectroscopy – summary of the SAFIR project results

The determination of toxic components from fire gases is difficult because the environment is hot, reactions are often temperature dependent, and a lot of soot may be produced. Due to the different properties of the gas components, a different time‐consuming procedure for each species has traditionally been used. The use of FTIR (Fourier transform infrared) spectrometers as a continuous monitoring technique overcomes many of the problems in smoke gas analyses. FTIR offers an opportunity to set up a calibration and prediction method for each gas showing a characteristic spectral band in the infrared region of the spectrum. The objective of the SAFIR project was to further develop the FTIR gas analysis of smoke gases to be an applicable and reliable method for the determination of toxic components in combustion gases related to fire test conditions. The optimum probe design, filter parameters and the most suitable sampling lines in terms of flow rate, diameter, construction material and operating temperature have been specified. In the large scale, special concern was given to the probe design and the effects of the probe location as well as practical considerations of the sampling line length. Quantitative calibration and prediction methods have been constructed for different components present in smoke gases. Recommendations on how to deal with interferents, non‐linearities and outliers have been provided and a verification method for the spectrometer for unexpected variations and for the different models have been described. FTIR measurement procedures in different fire test scenarios have been studied using the recommendations of this project for measurement techniques and analysis and an interlaboratory trial of the FTIR technique in smoke gas analysis was carried out to define the repeatability and reproducibility of the method in connection with a small scale fire test method, the cone calorimeter. Copyright © 2000 John Wiley & Sons Ltd.     

New associative systems based on alkylated hyaluronic acid. Synthesis and aqueous solution properties

This paper concerns the preparation of new water-soluble alkylated derivatives of hyaluronan (HA); these derivatives were synthesized under mild aqueous and well controlled conditions. The first step was to prepare a HA derivative selectively modified with adipic dihydrazide (HA-ADH) with a substitution degree of 0.08; then, alkyl chains with different chain lengths were introduced with a substitution degree around 0.05. These polymers being still water-soluble exhibit associating properties in the presence of external salt. Formation of hydrophobic domains is demonstrated from fluorescence measurements in the presence of pyrene as a probe. Then, it is shown that the viscosity of polymer solutions in 0.1 M NaCl becomes non-Newtonian for HA grafted with C-10 and C-12 chains and increases rapidly with the polymer concentration over 1 g/L. When the polymer concentration increases, a gel-like behaviour was observed from rheological measurements with the G′ modulus larger than G″ in all the frequency range covered. The dependence of the shear stress on shear rate applied according to a continuous linear ramp provided evidence of the deformation or rupture of aggregates. The latter were shown to reform slowly. At the end, the influence of temperature was examined: first a slight increase in the modulus was observed followed by a decrease corresponding to reinforcement of the hydrophobic interactions.     

Conductive-probe atomic force microscopy characterization of silicon nanowire

The electrical conduction properties of lateral and vertical silicon nanowires (SiNWs) were investigated using a conductive-probe atomic force microscopy (AFM). Horizontal SiNWs, which were synthesized by the in-plane solid-liquid-solid technique, are randomly deployed into an undoped hydrogenated amorphous silicon layer. Local current mapping shows that the wires have internal microstructures. The local current-voltage measurements on these horizontal wires reveal a power law behavior indicating several transport regimes based on space-charge limited conduction which can be assisted by traps in the high-bias regime (> 1 V). Vertical phosphorus-doped SiNWs were grown by chemical vapor deposition using a gold catalyst-driving vapor-liquid-solid process on higly n-type silicon substrates. The effect of phosphorus doping on the local contact resistance between the AFM tip and the SiNW was put in evidence, and the SiNWs resistivity was estimated.     

Ytterbium Triflate Promoted One-Pot Three Component Synthesis of 3,4,5-Trisubstituted-3,6-dihydro-2<Emphasis Type="Italic">H</Emphasis>-1,3-oxazines

Abstract  

An efficient one-pot synthesis of 3,4,5-trisubstituted-3,6-dihydro-2H-1,3-oxazines from acetylene dicarboxylates, aromatic and aliphatic amines, and formaldehyde is described. The six member N,O-heterocyclic nucleus was constructed via Yb(OTf)₃ promoted domino hydroamination/Prins reaction/cyclization/dehydration reactions.     

Effect of itaconic acid on the wet scrub resistance of highly pigmented paints for architectural coatings

This study investigates the influence of carboxylic monomers, such as itaconic acid (IA), on the colloidal properties of the latexes made by semi-continuous emulsion copolymerization of styrene (STy) with n-butyl acrylate (BA). A number of copolymerization runs were carried out with different IA concentrations. The effect of functional monomer on the overall conversion, the colloidal properties of the latexes, and the distribution of the carboxylic groups (buried, particle surface and aqueous phase) were examined. The carboxylic groups present in the latexes were analyzed using conductimetric and potentiometric titrations. The behavior of the IA on the wet scrub resistance of highly pigmented paints for architectural coatings was examined and correlated with the distribution of the carboxylic groups. The results obtained showed that the properties of highly pigmented paints are greatly dependent on the amount and distribution of the carboxylic groups. The carboxylic acid distributed in the aqueous phase has a strong influence on the wet scrub resistance and on the characteristics of the final products.     

Insight into β-Carotene Thermal Degradation in Oils with Multiresponse Modeling

The aim of this study was to gain further insight into β-carotene thermal degradation in oils. Multiresponse modeling was applied to experimental high-performance liquid chromatography–diode array detection (HPLC–DAD) data (trans-, 13-cis-, and 9-cis-β-carotene concentrations) during the heat treatments (120–180 °C) of two β-carotene-enriched oils, i.e., palm olein and copra. The test of different reaction schemes showed that β-carotene isomerization reactions were dominant and reversible. The resulting cis isomers and trans-β-carotene simultaneously underwent oxidation and cleavage reactions at the same rate constant. From the kinetic analysis, it appeared that—contrary to oxidation and cleavage reactions—isomerization rate constants did not follow the Arrhenius law. However, the isomerization equilibrium constant increased with temperature, favoring isomer production, particularly 9-cis-β-carotene. Its production was shown to be concomitant with oxidation and cleavage reactions, indicating that 9-cis-β-carotene could be a good degradation indicator during oil storage or processing.     

Newly designed polyacrylamide/dextran gels for electrophoresis protein separation: synthesis and characterization

Newly designed gels for electrophoresis protein separation were synthesized from acrylamide, N,N′‐methylenebis (acrylamide) and dextran mixtures. Radical polymerization was initiated by ammonium persulfate and N,N,N′,N′‐tetramethylethylenediamine. The time dependence of absorbance during polymerization was monitored using UV‐visible spectroscopy. The exothermic polymerization process exhibited a sharp rise of temperature reminiscent of the Trommsdorff effect. The swelling kinetics of the synthesized gels was examined in deionized water and buffer solutions. One of the challenges was to find an alternative to commercial products, sold as mixtures with no detailed chemical contents, commonly used in sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS‐PAGE) for protein separation. For this reason, a systematic comparison was made of the properties of one of the most commonly used commercial gels, Duracryl^? from Genomics Solution Inc., and those of the synthesized polyacrylamide/dextran gels. Copyright © 2011 Society of Chemical Industry     

Decellularised Human Umbilical Artery as a Vascular Graft Elicits Minimal Pro-Inflammatory Host Response Ex Vivo and In Vivo

Small diameter (<6 mm) vessel grafts still pose a challenge for scientists worldwide. Decellularised umbilical artery (dUA) remains promising as small diameter tissue engineered vascular graft (TEVG), yet their immunogenicity remains unknown. Herein, we evaluated the host immune responses, with a focus on the innate part, towards human dUA implantation in mice, and confirmed our findings in an ex vivo allogeneic human setup. Overall, we did not observe any differences in the number of circulating white blood cells nor the number of monocytes among three groups of mice (1) dUA patch; (2) Sham; and (3) Mock throughout the study (day −7 to 28). Likewise, we found no difference in systemic inflammatory and anti-inflammatory cytokine levels between groups. However, a massive local remodelling response with M2 macrophages were observed in the dUA at day 28, whereas M1 macrophages were less frequent. Moreover, human monocytes from allogeneic individuals were differentiated into macrophages and exposed to lyophilised dUA to maximize an eventual M1 response. Yet, dUA did not elicit any immediate M1 response as determined by the absence of CCR7 and CXCL10. Together this suggests that human dUA elicits a minimal pro-inflammatory response further supporting its use as a TEVG in an allogeneic setup.