Efficient implementation of the implicit error correction nVoD schema

Implicit Error Correction is a near Video-on-Demand (nVoD) schema that trades bandwidth utilization for initial playback delay while potentially allowing an infinite number of users. Additionally, it provides error protection without further bandwidth increase by exploiting the implicit redundancy of nVoD protocols, using linear combinations of the segments transmitted in a given time slot. This paper introduces a new implementation that outperforms the original schema by adding two new mechanisms: redundancy channels and feedback error correction.     

DATA ANALYSIS PRIOR TO A CIRCULATION MODEL IN GRAN CANARIA

The use of numerical models in physical oceanography, with the aim of reproducing and predicting water movements, is a common practice, especially for coastal areas. Nevertheless, results will be accurate only if the assumptions are appropriate and include all significant characteristics of the domain under modeling. Two-dimensional models are often used for shallow-water areas, but the implicit assumptions of conservation of a characteristic vertical profile for the horizontal velocities all over the domain and negligible vertical circulation must be exhaustively checked. Here a case is presented in which two-dimensionality would have led to inaccurate results, as the analysis of the field data showed a three-layer behavior. This case concerns the eastern coast of Gran Canaria island (Canary Islands) and illustrates how mathematical models will describe the phenomena they try to represent correctly only if all assumptions are right.     

Development of a Real Time PCR system for detection of ochratoxin A-producing strains of the Aspergillus niger aggregate

Members of Aspergillus section Nigri are distributed worldwide, being considered as common food spoilage fungi. Some species of this section produce ochratoxin A (OTA), mainly Aspergillus carbonarius and several members of the Aspergillus niger aggregate. Detection of ochratoxigenic A. niger aggregate strains is important to prevent OTA contamination in foodstuffs. A new Real Time PCR procedure has been developed for the rapid and specific detection and quantification of ochratoxin A-producing strains of the A. niger aggregate. Two specific primers delimiting a 120 bp fragment and a probe were designed and directed to a polyketide synthase (PKS) from A. niger CBS 513.88 genome. This PKS has a strong similarity to PKS of A. ochraceus fragment involved in ochratoxin biosynthesis. Specificity was confirmed by testing primers towards purified DNA from 91 fungal strains, including reference and food isolates. The SYBR-Green and the TaqMan approaches developed allowed the specific detection only of ochratoxigenic strains of the A. niger aggregate. All other analyzed food related fungi gave negative results. This is the first report on a Real Time PCR system for the detection of OTA-producing strains of the A. niger aggregate.     

Microstructure of NiCoAlFeCuCr multi-component systems synthesized by mechanical alloying

The present study uses the mechanical alloying method to produce series of binary to senary alloys based on Ni, Co, Al, Fe, Cu, Cr. Milling times are 0, 10, 20 and 30 h and experiments are performed in a high energy ball mill. The results of this investigation show that an FCC solid solution is formed in all the studied systems, but a different phase formation response is presented in each system. A mixture of FCC and BCC solid solutions in quaternary to senary systems, is formed for short milling times. Apparently, the dissolution rate of Fe and Cr into the FCC solid solution, is low. Moreover, it is observed that additions of these elements promote the formation of BCC solid solution, which is stable at temperatures up to ?1273 K. Finally, it is observed that the heat treated products present a mixture of FCC and BCC solid solutions with lattice parameters close to those found in the milled products.     

Low Voltage Class AB Output Stage for CMOS Op-Amps Using Multiple Input Floating Gate Transistors

A new class AB output stage for CMOS op-amps is proposed with simple and accurate quiescent current control using floating gate transistors. The proposed stage can be operated with a supply voltage close to a transistor's threshold voltage. Experimental results are provided showing a 15 MHz gain-bandwidth product when it is used as the second stage of an op-amp with 1.5 V supply voltage in a standard 0.8 m CMOS technology.     

Biological tissue characterization by magnetic induction spectroscopy (MIS): requirements and limitations

Magnetic induction spectroscopy (MIS) aims at the contactless measurement of the passive electrical properties (PEP) sigma, epsilon, and mu of biological tissues via magnetic fields at multiple frequencies. Whereas previous publications focus on either the conductive or the magnetic aspect of inductive measurements, this article provides a synthesis of both concepts by discussing two different applications with the same measurement system: 1) monitoring of brain edema and 2) the estimation of hepatic iron stores in certain pathologies. We derived the equations to estimate the sensitivity of MIS as a function of the PEP of biological objects. The system requirements and possible systematic errors are analyzed for a MIS-channel using a planar gradiometer (PGRAD) as detector. We studied 4 important error sources: 1) moving conductors near the PGRAD; 2) thermal drifts of the PGRAD-parameters; 3) lateral displacements of the PGRAD; and 4) phase drifts in the receiver. All errors were compared with the desirable resolution. All errors affect the detected imaginary part (mainly related to sigma) of the measured complex field much less than the real part (mainly related to epsilon and mu). Hence, the presented technique renders possible the resolution of (patho-) physiological changes of the electrical conductivity when applying highly resolving hardware and elaborate signal processing. Changes of the magnetic permeability and permittivity in biological tissues are more complicated to deal with and may require chopping techniques, e.g., periodic movement of the object.     

Electrochemically Tuned Properties for Electrolyte‐Free Carbon Nanotube Sheets

Injecting high electronic charge densities can profoundly change the optical, electrical, and magnetic properties of materials. Such charge injection in bulk materials has traditionally involved either dopant intercalation or the maintained use of a contacting electrolyte. Tunable electrochemical charge injection and charge retention, in which neither volumetric intercalation of ions nor maintained electrolyte contact is needed, are demonstrated for carbon nanotube sheets in the absence of an applied field. The tunability of electrical conductivity and electron field emission in the subsequent material is presented. Application of this material to supercapacitors may extend their charge‐storage times because they can retain charge after the removal of the electrolyte.     

Nanocasting of Mesoporous In‐TM (TM = Co,Fe, Mn) Oxides: Towards 3D Diluted‐Oxide Magnetic Semiconductor Architectures

Transition metal (Co, Fe, Mn)‐doped In₂O_3?y mesoporous oxides are synthesized by nanocasting using mesoporous silica as hard templates. 3D ordered mesoporous replicas are obtained after silica removal in the case of the In‐Co and In‐Fe oxide powders. During the conversion of metal nitrates into the target mixed oxides, Co, Fe, and Mn ions enter the lattice of the In₂O₃ bixbyite phase via isovalent or heterovalent cation substitution, leading to a reduction in the cell parameter. In turn, non‐negligible amounts of oxygen vacancies are also present, as evidenced from Rietveld refinements of the X‐ray diffraction patterns. In addition to (In_1?xTM_x)₂O_3?y, minor amounts of Co₃O₄, α‐Fe₂O₃, and Mn_xO_y phases are also detected, which originate from the remaining TM cations not forming part of the bixbyite lattice. The resulting TM‐doped In₂O_3?y mesoporous materials show a ferromagnetic response at room temperature, superimposed on a paramagnetic background. Conversely, undoped In₂O_3?y exhibits a mixed diamagnetic‐ferromagnetic behavior with much smaller magnetization. The influence of the oxygen vacancies and the doping elements on the magnetic properties of these materials is discussed. Due to their 3D mesostructural geometrical arrangement and their room‐temperature ferromagnetic behavior, mesoporous oxide‐diluted magnetic semiconductors may become smart materials for the implementation of advanced components in spintronic nanodevices.