Intraoperative neurological monitoring

Intraoperative neurological monitoring (INM) is the evaluation of the nervous system within the operating room (OR) environment. In this paper, the INM system is tested in a clinical setting in comparison with conventional somatosensory evoked potential (SEP) monitoring. The study results demonstrate the capability of the INM system in extracting clearer and more stable SEP signals. The high SNR of SEP signals collected in various clinical environments, including the OR, makes the INM system a robust platform for continuous monitoring. While the current use of EP monitoring is limited to intermittent analysis by a highly trained clinical neurophysiologist, the authors believe in changing this paradigm by developing continuous monitoring systems, such as the INM system, capable of automated quantitative EP analysis. This noninvasive monitoring modality will allow for a wider range of use in clinical practice. Based on volunteer and clinical patient studies, the INM monitoring system demonstrates much greater reliability and accuracy via the artifact rejection and denoising strategies. It provides more strategic filtering options for different situations under which the clinical SEP response signal could be greatly contaminated and distorted. Furthermore, the INM system offers a promising approach to signal extraction in real-time monitoring during SEP research.     

A rate adaptive bit-loading algorithm for in-building power-line communications based on DMT-modulated systems

This paper deals with a variable rate discrete multitone modulation system for broadband power-line communications, based on the bit-loading algorithm proposed by Leke and Cioffi. In the proposed system a suitable least mean square channel estimator is considered, which is based on the insertion of a training sequence (TS). The proposed approach will be compared with the ideal channel estimates, showing its effectiveness. Moreover, different TS lengths will be compared. The system performance, expressed in terms of bit rate and bit-error rate, is derived by simulation with and without estimation errors. The propagation environment has been assumed as a frequency-selective multipath fading channel with additive colored Gaussian noise, according to the in-building networks model.     

RZ-DPSK signal regeneration based on dual-pump phase-sensitive amplification in fibers

All-optical regeneration of differential phase-shift keying signals by means of a phase-sensitive amplification scheme solely based on highly efficient four-wave mixing in fibers is theoretically and numerically studied. The analytical and numerical investigation demonstrates almost ideal phase regeneration accompanied with enhanced amplitude noise suppression in the regime of pump depletion.     

Application of mortar elements to diffuse-interface methods

An adaptive 2D mesh refinement technique based on mortar spectral elements applied to diffuse-interface methods is presented. The refinement algorithm tracks the movement of the 2D diffuse-interface and subsequently refines the mesh locally at that interface, while coarsening the mesh in the rest of the computational domain, based on error estimators. Convergence of the method is validated using a Gaussian distribution problem and results are presented for a Cahn–Hilliard diffuse-interface model applied to capture the transient dynamics of polymer blends.     

Neuronet Data Processing on the State of an Object After an Emergency

Neuronets are considered for processing data on the state of a potentially hazardous object after an emergency. An example is given of processing the data on the state of a potentially hazardous object in increments.Translated from Izmeritel’naya Tekhnika, No. 3, pp. 6–8, March, 2005.     

Apparent versus true density for the volume-to-weight transformation in coal blends

This work reviews the procedures involved in the conversion of the petrographic characterization data of blended coals into weight percentages of the single coals in the blends, the selection of the most suitable parameter for describing the density of the coals being critical. First, the fundamentals of the volume-to-weight transformation of the petrographic data were developed by means of mathematical formulae. This part of the procedure highlighted the need to use a density value adapted to the resolving power of the optical microscope. It was found that mercury penetration at 5 MPa, as determined by mercury porosimetry, was best suited for this purpose. A literature survey of published coal density data revealed that the use of correlations between coal density and rank was not an accurate enough procedure to deal with the relatively low corrections involved in the transformation of petrographic data. In the end, three binary blends were prepared from six carefully selected coals and polished particulate blocks of these blends were petrographically analysed to determine their compositions on a volume per cent basis. The best fit of these volume percentages with the weight percentages used in the formulation of the blends was found for a density correction based on mercury penetration at 5 MPa, in agreement with the empirical analysis.     

Anodising potential influence on well-ordered nanostructures formed by anodisation of aluminium in sulphuric acid

High-density structures with relatively well-ordered nanopore arrays have been obtained by the self-ordering growth of nanopores occurring during anodisation of aluminium in sulphuric acid. The resulting array of well-ordered nanopores strongly depends on an applied voltage of anodising, temperature and a procedure of synthesis. Regular arranged hexagonal arrays on aluminium with a relatively uniform pore diameter, interpore distance, and depth of pores exceeding 90 μm, can be formed by the self-ordering two-step anodising at 1 °C. The interpore distance and the pore diameter were evaluated on anodised aluminium layers obtained at different cell potentials ranging from 15 to 25 V. The detailed analyses of their uniformity were performed from SEM images. The analysis of a pore arrangement defects was made from SEM top view images taken on samples anodised at various cell potentials. The defect maps, known as Delaunay triangulations, of the arrangement of about 1000 pores were constructed for different applied anodising potentials. The percentage of pores that are not six-fold coordinated by the neighbouring pores indicates the percentage of defected surface.     

美国珠宝评估业与珠宝保险评估

珠宝首饰的评估在美国的发展也是循序渐进的，依据市场与需求进行的，珠宝评估业的规模正在不断扩大，所提供的服务也正在细化，并向更加专业化的方向发展。     

Detection of fatty acid beta-oxidizing syntrophic bacteria by fluorescence in situ hybridization.

A new 16S rRNA-targeted oligonucleotide probe, specific for the cluster of fatty acid beta-oxidizing syntrophic bacteria of the family Syntrophomonadaceae was designed for fluorescence in situ hybridization. This probe was evaluated with target as well as non-target cultures. Moreover this probe was assessed with butyrate and oleate degrading enrichment cultures and methanogenic sludges from full-scale plants. The results showed that the probe revealed the presence of fatty acid beta-oxidizing syntrophic bacteria in some of the samples analyzed. However, cell quantification was possible only in enrichment cultures and in a flocculent sludge from a reactor that treats lipid-rich wastewaters, but not in methanogenic granular sludges from upflow anaerobic sludge blanket reactors.