Antimicrobial coatings produced by “tethering” biocides to the coating matrix: A comprehensive review

Covalently attached, non-leaching biocidal-moieties are being explored as an environmentally friendly option for replacing antimicrobial coatings that release biocides. This review highlights studies on antimicrobial surface treatments and coatings in which the antimicrobial agent is covalently bound (i.e. tethered) to the surface or coating matrix. In addition, test methods for measuring antimicrobial surface activity are reviewed, and a discussion of advantages and disadvantages of the various methods is provided.     

Electrical, mechanical, and glass transition behavior of polycarbonate-based nanocomposites with different multi-walled carbon nanotubes

Five commercially available multi-walled carbon nanotubes (MWNTs), with different characteristics, were melt mixed with polycarbonate (PC) in a twin-screw micro compounder to obtain nanocomposites containing 0.25-3.0 wt.% MWNT. The electrical properties of the composites were assessed using bulk electrical conductivity measurements, the mechanical properties of the composites were evaluated using tensile tests and dynamic mechanical analysis (DMA), and the thermal properties of the composites were investigated using differential scanning calorimetry (DSC). Electrical percolation thresholds (p_cs) were observed between 0.28 wt.% and 0.60 wt.%, which are comparable with other well-dispersed melt mixed materials. Based on measurements of diameter and length distributions of unprocessed tubes it was found that nanotubes with high aspect ratios exhibited lower p_cs, although one sample did show higher p_c than expected (based on aspect ratio) which was attributed to poorer dispersion achieved during mixing. The stress-strain behavior of the composites is only slightly altered with CNT addition; however, the strain at break is decreased even at low loadings. DMA tests suggest the formation of a combined polymer-CNT continuous network evidenced by measurable storage moduli at temperatures above the glass transition temperature (T_g), consistent with a mild reinforcement effect. The composites showed lower glass transition temperatures than that of pure PC. Lowering of the height of the tanδ peak from DMA and reductions in the heat capacity change at the glass transition from DSC indicate that MWNTs reduced the amount of polymer material that participates in the glass transition of the composites, consistent with immobilization of polymer at the nanotube interface.     

Buckling initiation and displacement dependence in compression of vertically aligned carbon nanotube arrays

Carbon nanotube (CNT) arrays have shown the remarkable ability to react as foam-like structures and exhibit localized buckling coordinated within specific regions. Here, we report on the low-cycle compression of bulk vertically aligned CNT arrays to observe initiation and growth of the buckling as a function of compressive strain. A critical strain is found above which the buckling region length increased and below which it remained at or below the applied strain. As previously observed, the buckling region of the CNT array propagates from the surface where growth occurred, which, in the test specimen, is a free surface and later receives compressive contact by a polished silicon substrate. The results are corroborated with nanoindentation on the surfaces, which indicate a stiffening of the near surface with increasing applied strain. Observation and results of the buckling region nature are important for applications of nanotube arrays as energy absorbing cushions, tunable dampers, thermal contacts, or in sliding contact.     

Update on the pharmacology of Spirulina (Arthrospira), an unconventional food

Spirulina (Arthrospira), a filamentous, unicellular alga, is a cyanobacterium grown in certain countries as food for human and animal consumption. It is also used to derive additives in pharmaceuticals and foods. This alga is a rich source of proteins, vitamins, amino acids, minerals, and other nutrients. Its main use, therefore, is as a food supplement. Over the last few years, however, it has been found to have many additional pharmacological properties. Thus, it has been experimentally proven, in vivo and in vitro that it is effective to treat certain allergies, anemia, cancer, hepatotoxicity, viral and cardiovascular diseases, hyperglycemia, hyperlipidemia, immunodeficiency, and inflammatory processes, among others. Several of these activities are attributed to Spirulina itself or to some of its components including fatty acids omega-3 or omega-6, beta-carotene, alpha-tocopherol, phycocyanin, phenol compounds, and a recently isolated complex, Ca-Spirulan (Ca-SP). This paper aims to update and critically review the results published over the last few years with regards to these properties. The conclusion is that even if this cyanobacterium has been one of the most extensively studied from the chemical, pharmacological and toxicological points of view, it is still necessary to expand the research in order to have more consistent data for its possible use in human beings.     

DEPOSITION OF A FINE POWDER IN HORIZONTAL PIPELINES AND BENDS

The deposition of a very fine powder in a horizontal, lean-phase pneumatic conveying conduit containing a 90° bend has been studied experimentally. The total deposition and the deposition pattern were studied as a function of superficial gas velocity, solids loading and bend geometry: one sharp and three smooth bends of different radii of curvature were used. Most deposition was seen in the sharp bend, while in the smooth bends the deposition did not vary much with radius of curvature. The deposition decreased significantly with increasing superficial gas velocity. The experimental results were compared with CFD simulations of the flow field. The observations are consistent with the notion of deposition in regions with low near-wall gas velocity, indicating that models for deposition should be sought in considerations of the deposit stability for this type of system.     

Recycle of valuable products from oily cold rolling mill sludge

Oily cold rolling mill （CRM） sludge contains lots of iron and alloying elements along with plenty of hazardous organic components, which makes it as an attractive secondary source and an environmental contaminant at the same time. The compound methods of ＂vacuum distillation ＋ oxidizing roasting＂ and ＂vacuum distillation ＋ hydrogen reduction＂ were employed for the recycle of oily cold rolling mill sludge. First, the sludge was dynamically vacuum distilled in a rotating furnace at 50 r/rain and 600℃ for 3 h, which removed almost hazardous organic components, obtaining 89.2wt% ferrous resultant. Then, high purity ferric oxide powders （99.2wt%） and reduced iron powders （98.9wt%） were obtained when the distillation residues were oxidized and reduced, respectively. The distillation oil can be used for fuel or chemical feedstock, and the distillation gases can be collected and reused as a fuel.     

The Critical Role of Passive Permeability in Designing Successful Drugs

Passive permeability is a key property in drug disposition and delivery. It is critical for gastrointestinal absorption, brain penetration, renal reabsorption, defining clearance mechanisms and drug-drug interactions. Passive diffusion rate is translatable across tissues and animal species, while the extent of absorption is dependent on drug properties, as well as in vivo physiology/pathophysiology. Design principles have been developed to guide medicinal chemistry to enhance absorption, which combine the balance of aqueous solubility, permeability and the sometimes unfavorable compound characteristic demanded by the target. Permeability assays have been implemented that enable rapid development of structure-permeability relationships for absorption improvement. Future advances in assay development to reduce nonspecific binding and improve mass balance will enable more accurately measurement of passive permeability. Design principles that integrate potency, selectivity, passive permeability and other ADMET properties facilitate rapid advancement of successful drug candidates to patients.     

Pd-Decorated Tungsten as Pt-Free Bimetallic Catalysts for Hydrogen Oxidation Reaction in Alkaline Electrolyte

Developing Pt-free catalysts for hydrogen oxidation reaction (HOR) in alkaline solution is becoming a key challenge in the development of anion exchange membrane fuel cells and electrochemical reactors. Herein, we present the preparation, HOR activity, and stability of Pd-decorated tungsten (Pd-d-W) catalysts. The Pd-d-W catalysts were prepared by the chemically activated surface of tungsten nanoparticles by Pd ions. The resultant bimetallic catalysts consisted of crystalline phases of both Pd and W nanoparticles. The CO stripping voltammograms and H-desorption (H_des) peak potential of hydrogen desorption in Pd suggests that the enhancement of HOR catalytic activity observed in Pd-d-W catalyst can be ascribed to the modification of electronic property of Pd and availability of OH_ad near-surface Pd atoms.     

Carbon,nitrogen and phosphorus recovery from liquid swine wastes: a review

Due to the pollution characteristics of the wastewater generated in piggeries, these waste streams have to be treated before discharging into the environment. These wastes have a high content of organic matter, nitrogen and phosphorus that can be converted or recovered into valuable products. The valuation of swine waste by anaerobic digestion has already been assessed, but no systematic review on the technologies used for recovering nutrients from this waste has been reported to date. Therefore, the present work has the goal of presenting the most studied technologies to different scales of recovery of carbon (i.e. organic matter), nitrogen and phosphorus from swine waste. The main characteristics and parameters of the processes involved in these technologies (mainly air stripping, membrane, enhance biological phosphorus removal and struvite formation) are also highlighted, pointing out its advantages and disadvantages and posing some final feasibility considerations on the subject addressed. Experiments reported in the literature proved that technologies used for nutrient recovery from swine waste are mostly applied to the effluents previously treated by anaerobic digestion as a primary treatment, and greater effort is required for the future implementation of these technologies in large scale. © 2020 Society of Chemical Industry