Modulation of rumen pH by sodium bicarbonate and a blend of different sources of magnesium oxide in lactating dairy cows submitted to a concentrate challenge

With the objective of evaluating the potential effects of sodium bicarbonate or a magnesium-based product on rumen pH and milk performance of dairy cattle exposed to a dietary challenge, 30 lactating Holstein cows (648 ± 67 kg of body weight; 44.4 ± 9.9 kg/d of milk yield; 155 ± 75 d in milk) were blocked by parity (9 primiparous and 21 multiparous) and randomly distributed to 3 treatment groups. One group received a total mixed ration (TMR) that acted as a control (CTR), a second group (SB) received the same TMR but with an additional supplementation of 0.8% of sodium bicarbonate, and a third group (MG) received the same TMR as CTR but an additional supplementation of 0.4% of a magnesium-based product (pHix-Up, Timab, Dinard, France). After 1 wk of exposure to this TMR, all 3 rations were supplemented with 1 kg/d of barley, which was then increased 1 kg/wk until reaching 3 kg/d of barley during wk 4 of the study. Every kilogram of barley replaced 1 kg of forage in the diet. Individual feed intake and behavior were monitored using electronic feed bins. Seven cows per treatment were equipped with an intraruminal bolus that recorded pH every 15 min. As the severity of the barley challenge increased, dry matter intake decreased, but this decrease was more pronounced in SB cows than in MG cows, with an intermediate response for CTR cows. The MG cows produced more milk when challenged with 2 or 3 kg/d of additional barley than when challenged with 1 kg/d, whereas CTR cows produced less milk with the 3 kg/d challenge compared with 1 or 2 kg/d, and the SB cows maintained milk production. Milk fat content decreased with barley challenges, with CTR cows experiencing a more severe decrease than SB cows, which maintained stable butterfat values throughout the study, and MG cows showed a decline in milk fat content only with the 3 kg/d of additional barley. Meal size was also reduced as the severity of barley challenge increased, and this reduction was more modest in MG cows than in SB cows. The number of daily meals consumed by SB and MG cows was more constant than that recorded in CTR cows. Cows on the CTR and SB treatments showed a marked decrease in rumen pH with the 3 kg/d of additional barley, whereas MG cows maintained stable rumen pH during the barley challenges and had greater average rumen pH (5.93 ± 0.04) than CTR cows (5.83 ± 0.04) with the 3 kg/d of additional barley; SB cows showed intermediate values (5.85 ± 0.04). Last, MG cows spent less time (32.3 ± 6.1%) with rumen pH ≤5.8 when exposed to the 3 kg/d of barley challenge than CTR and SB cows (50.7 ± 5.02%). In conclusion, supplementation with MG prevents the decline in dry matter intake and milk production induced by a rumen challenge, whereas supplementation with SB prevents the decay in milk production but does not prevent the decrease in feed intake. These changes were probably due to the ability of the MG treatment to prevent a reduction in rumen pH when challenging cows with 3 kg/d of additional barley in the ration.     

Managing the risk of a COVID-19 outbreak from border arrivals

In an attempt to maintain the elimination of COVID-19 in New Zealand, all international arrivals are required to spend 14 days in government-managed quarantine and to return a negative test result before being released. We model the testing, isolation and transmission of COVID-19 within quarantine facilities to estimate the risk of community outbreaks being seeded at the border. We use a simple branching process model for COVID-19 transmission that includes a time-dependent probability of a false-negative test result. We show that the combination of 14-day quarantine with two tests is highly effective in preventing an infectious case entering the community, provided there is no transmission within quarantine facilities. Shorter quarantine periods, or reliance on testing only with no quarantine, substantially increases the risk of an infectious case being released. We calculate the fraction of cases detected in the second week of their two-week stay and show that this may be a useful indicator of the likelihood of transmission occurring within quarantine facilities. Frontline staff working at the border risk exposure to infected individuals and this has the potential to lead to a community outbreak. We use the model to test surveillance strategies and evaluate the likely size of the outbreak at the time it is first detected. We conclude with some recommendations for managing the risk of potential future outbreaks originating from the border.     

Plasmon-induced trap filling at grain boundaries in perovskite solar cells

The deep-level traps induced by charged defects at the grain boundaries (GBs) of polycrystalline organic–inorganic halide perovskite (OIHP) films serve as major...     

A reduction approach to the two-campus transport problem

The two-campus transport problem (TCTP) is a dial-a-ride problem with only two destinations. The problem is motivated by a transport problem between two campuses of an academic college. The two campuses are located in two different cities. Lecturers living in one city are sometimes asked to teach at the other city’s campus. The problem is that of transporting the lecturers from one campus to the other, using a known set of vehicles, so as to minimize the time the lecturers wait for their transport. We mathematically model the general TCTP, and provide an algorithm that solves it, which is polynomial in the number of lecturers. The algorithm is based on a reduction to a shortest path problem.     

Factors facilitating or impeding older adults’ creative contributions in the collaborative design of a novel DTV-based application

This article describes some of the challenges of supporting older adults’ creative input to the design of an (as yet) undefined digital television application. Focusing on commonly used brainstorming and paper prototyping techniques, constructive insights are gathered from users with limited experience of interactive technology. Encouraging older participants to move beyond what they are familiar with, the research reports on how fragmented conceptual knowledge of familiar technologies can either facilitate or impede the creative development of new ideas. This includes bias or contradictory ideas that can emerge in the elicitation process. As reported, other factors, such as the self-perception of inadequate drawing skills, demonstrate further barriers for some older adults to articulate their visions and aspirations for suitably designed technology.     

Synthesis and characterization of high molecular weight polyaniline for organic electronic applications

High molecular weight polyaniline (PANI) was synthesized by a combined procedure incorporating various synthesis methods. Temperature and open circuit potential of the reaction mixture were collected to monitor the reaction progress. The polymer is characterized by various techniques including gel permeation chromatography, dynamic light scattering, infrared spectroscopy, solid‐state nuclear magnetic resonance, and differential scanning calorimetry for elucidating the molecular architecture obtained by this method. As‐synthesized PANI was found to possess high molecular weight, reduced branching, reduced cross‐linking, and to predominantly consist of linear polymer chains. This polymer was also found to be more stable in solution form. J–V characteristics of as‐synthesized PANI films indicate a high current density which is due to increased free pathways and less traps for the charge transport to occur in PANI films. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

From experimental data,the mechanics relationships describing the behaviour of four different low alloyed steel powders during uniaxial cold compaction

This work aims at determining the constitutive model of four commercial water atomised low alloyed steel powders during cold compaction. Single-action experiments were performed, obtaining cylindrical specimens with different H/D ratios. The distribution of axial and radial stresses was investigated, and the relationships describing both the radial stress transmission coefficient and the flow stress as functions of the relative density were determined. The radial stress transmission coefficient also confirmed the hypothesised value of Poisson’s coefficient. The friction coefficient between the powder column and the die wall was determined, also highlighting the influence of the H/D ratio. Measuring the axial and radial strains due to spring-back, the axial and radial elastic moduli were determined, as functions of the relative density. The results obtained for the four materials were compared, also highlighting both differences and similarities.     

Effect of diethyl ether blended with neem oil methyl esters in CI engine

Vegetable oils are now considered to be a potential alternative that can be used in place of partial or total substitution of diesel fuels. In this study, we used diethyl ether as an oxygenated additive to investigate the possible use of higher percentages of biodiesel in an unmodified diesel engine. Neem oil was selected for biodiesel production. The tests were performed at a steady-state condition in a single-cylinder constant speed DI diesel engine. The combustion process involved in diesel engine would be improved and the particulate matter would be reduced if these biodiesels are blended. An experimental investigation is carried out to establish the emission characteristics of a direct injection diesel engine using diethyl ether as additive in Neat Neem oil Biodiesel. Emissions of hydro carbon oxides of nitrogen and carbon monoxide significantly reduced by adding diethyl ether into neem oil biodiesel at 10% and 20% on volume basis.